Choosing the right 3D printer controller depends on your printer model and desired firmware. Whether you are upgrading an Ender 3 for silent operation or building a high-speed Klipper machine, the main control chip and driver support are critical factors.
This guide compares seven controllers, including BIGTREETECH boards and an OSOYOO kit. We examine main control chips, driver compatibility, and display options to help you select the board that matches your printing needs.
Our 3 picks for different needs
BIGTREETECH Octopus Pro V1.1
The Octopus Pro V1.1 supports 8 axis drivers and 550MHz processing, making it ideal for high-speed Klipper setups.
Read the details
BIGTREETECH SKR Mini E3 V3.0 + TFT35
This combo set includes a touch screen display, offering a plug-and-play upgrade for Ender 3 series printers.
Read the details
OSOYOO Ramps 1.4 Kit
The OSOYOO kit provides a modular Ramps 1.4 design with a Mega2560 board, suitable for custom RepRap builds.
Read the detailsAll products, in detail
BIGTREETECH SKR Mini E3 V3.0
The BIGTREETECH SKR Mini E3 V3.0 is a 32-bit control board designed for Ender 3 series printers. It features an STM32G0B1RET6 or STM32G0B0RET6 main control chip and includes three CNC fans to improve heat dissipation. The board uses a Micro USB B interface for PC communication and offers SPI output ports for external sensors.
This controller is a direct replacement for standard Ender 3 motherboards.
- Uses STM32G0B1RET6 or STM32G0B0RET6 main control chip
- Features three CNC fans for heat dissipation
BIGTREETECH Octopus Pro V1.1
The BIGTREETECH Octopus Pro V1.1 is a high-performance 32-bit board supporting both Marlin and Klipper firmware. It utilizes an STM32H723ZET6 chip running at 550MHz and supports up to eight axis motor drivers. The board includes an onboard MAX31865 for PT100/PT1000 temperature measurement and features eight isolation chips to protect the motherboard.
It is compatible with BTT Pi V1.2/Pi 2 or CB1/CB2+Pi4b adapters, making it suitable for high-speed Klipper printing setups.
- Supports 8 axis powerful motor drivers
- Runs at 550MHz with 512KB flash
BIGTREETECH SKR Mini E3 V3.0 + TFT35
This combo set includes the BIGTREETECH SKR Mini E3 V3.0 control board and a TFT35 E3 V3.0.1 touch screen display. The board adopts the STM32G0B0RET6 main control chip and integrates TMC2209 V1.3 mute stepper drivers for silent performance. The display allows users to switch between Marlin LCD emulator and touch screen modes.
It is a plug-and-play solution for Ender 3, Ender 3 Pro, and Ender 5 printers, offering automatic shutdown and power-off resume features.
- Includes TFT35 E3 V3.0.1 touch screen display
- Supports dual Z steppers for linear rail upgrades
BIGTREETECH SKR Mini E3 V2.0
The BIGTREETECH SKR Mini E3 V2.0 is a 32-bit silent motherboard designed as a drop-in replacement for Ender 3 printers. It uses an STM32F103RCT6 main control chip with a 72MHz CPU and integrates TMC2209 drivers. The board features a four-layer design to improve heat dissipation and anti-interference capabilities.
It supports various function extensions such as BLtouch, filament detection, and power-off resume, making it a stable upgrade for users seeking silent operation.
- Uses STM32F103RCT6 main control chip
- Features a 4-layer board design
OSOYOO Ramps 1.4 Kit
The OSOYOO 3D Printer Controller Kit includes a Ramps 1.4 board, a full graphic smart display, a Mega2560 board, and A4988 stepper motor drivers. The modular design allows for easy service and expansion, with plug-in stepper drivers on an Arduino-compatible shield. The included 12864 LCD display connects via a smart adapter, allowing users to print from an SD card without a PC.
This kit is designed to fit the entire electronics needed for a RepRap in one small package.
- Includes Ramps 1.4, Mega2560, and A4988 drivers
- Features a 12864 LCD smart display
BIGTREETECH Manta M8P V2.0
The BIGTREETECH Manta M8P V2.0 is an integrated 32-bit control board running Klipper with CB1. It uses an STM32H723ZET6 chip at 550MHz and features a TPS5450-5A power chip supporting DC12/24V input. The board uses a BTB connection method for core boards and reserves an SPI expansion interface for external acceleration sensors.
It supports PT1000 thermistors without external modules and includes interfaces for BLTouch, RGB, and proximity switches, making it a robust choice for high-speed printing.
- Uses TPS5450-5A power chip for 12/24V input
- Supports PT1000 without external modules
BIGTREETECH SKR Mini E3 V2.0 (TMC2209)
This BIGTREETECH SKR Mini E3 V2.0 control board is a 32-bit upgrade for Ender 3 V2, Ender3 Pro, and Ender-3 series printers. It features a TMC2209 UART driver and uses a WSK220N04 hot bed MOS tube to reduce heat generation. The board supports BLtouch, filament detection, and power-off resume.
Users should note that the CNC fan requires wind speed settings before use, as it is not ready to use immediately after power on. It is designed to avoid heat-related issues by increasing the distance between the driving chip and components.
- Features TMC2209 UART driver
- Uses WSK220N04 hot bed MOS tube
Head-to-Head Comparisons
SKR Mini E3 V3.0 vs V2.0: Chip and Fan Differences
The BIGTREETECH SKR Mini E3 V3.0 uses an STM32G0B1RET6 or STM32G0B0RET6 chip, while the V2.0 uses an STM32F103RCT6 chip. The V3.0 includes three CNC fans for heat dissipation, whereas the V2.0 features a four-layer board design to improve anti-interference. Both boards integrate TMC2209 drivers for silent operation.
The V3.0 offers a Micro USB B interface, while the V2.0 is a direct drop-in replacement for Ender 3 printers. Buyers should consider the specific chip architecture and cooling method when choosing between these two versions.
Octopus Pro V1.1 vs Manta M8P V2.0: Klipper Capabilities
Both the BIGTREETECH Octopus Pro V1.1 and Manta M8P V2.0 use the STM32H723ZET6 chip at 550MHz. The Octopus Pro supports up to eight axis motor drivers and features an onboard MAX31865 for temperature measurement. The Manta M8P V2.0 uses a TPS5450-5A power chip and a BTB connection method for core boards.
The Manta M8P reserves an SPI expansion interface for external acceleration sensors, while the Octopus Pro supports 5V level for stepper motor drivers. Both boards are suitable for Klipper firmware, but the Manta M8P offers specific power and sensor integration features.
SKR Mini E3 V3.0 Combo vs OSOYOO Ramps Kit: Display and Modularity
The BIGTREETECH SKR Mini E3 V3.0 combo includes a TFT35 touch screen display, allowing users to switch between Marlin LCD emulator and touch screen modes. The OSOYOO Ramps 1.4 kit includes a 12864 LCD smart display and a modular design with plug-in stepper drivers. The BIGTREETECH board is a direct replacement for Ender 3 motherboards, while the OSOYOO kit is designed for RepRap builds.
The BIGTREETECH combo offers a more integrated touch experience, whereas the OSOYOO kit provides modular expansion options. Buyers should choose based on whether they prefer a plug-and-play Ender 3 upgrade or a modular RepRap build.
Buying Guide
Main Control Chip Selection
The main control chip determines the processing power of your 3D printer controller. Boards like the BIGTREETECH Octopus Pro V1.1 and Manta M8P V2.0 use the STM32H723ZET6 chip at 550MHz, which is suitable for high-speed Klipper printing. The SKR Mini E3 V3.0 uses an STM32G0B1RET6 or STM32G0B0RET6 chip, while the V2.0 uses an STM32F103RCT6 chip.
Consider the chip's processing speed and architecture when selecting a board for your specific printing needs.
Stepper Driver Compatibility
Stepper driver compatibility is crucial for silent and precise printing. The BIGTREETECH SKR Mini E3 V3.0 and V2.0 integrate TMC2209 drivers, which offer silent performance. The Octopus Pro V1.1 supports TMC2209, TMC2208, and TMC5160T Pro drivers. The OSOYOO Ramps 1.4 kit includes A4988 drivers, which are a standard option for RepRap builds.
Ensure the board supports the specific driver type you plan to use for your printer.
Display and Interface Options
The display and interface affect how you interact with your 3D printer. The BIGTREETECH SKR Mini E3 V3.0 combo includes a TFT35 touch screen display, allowing for easy menu navigation. The OSOYOO Ramps 1.4 kit includes a 12864 LCD smart display, which connects via a smart adapter.
The Octopus Pro V1.1 is compatible with HDMI5 v1.2 touchscreen/TFT35/50/70 displays. Choose a board with a display that matches your preferred interface style.
Firmware Support
Firmware support determines the features and capabilities of your 3D printer controller. The BIGTREETECH Octopus Pro V1.1 supports both Marlin and Klipper firmware. The Manta M8P V2.0 runs Klipper with CB1. The OSOYOO Ramps 1.4 kit is compatible with Arduino Mega2560 boards. Ensure the board supports the firmware you intend to use for your printing projects.
Frequently Asked Questions
Can I use the SKR Mini E3 V3.0 with an Ender 3 printer?
Yes, the BIGTREETECH SKR Mini E3 V3.0 is a direct replacement for Ender 3, Ender 3 Pro, and Ender 5 3D printer motherboards. It is designed for plug-and-play compatibility with these models.
Does the Octopus Pro V1.1 support Klipper firmware?
Yes, the BIGTREETECH Octopus Pro V1.1 supports both Marlin and Klipper firmware. It is compatible with BTT Pi V1.2/Pi 2 or CB1/CB2+Pi4b adapter, making it a good choice for Klipper high-speed printing.
What display is included with the SKR Mini E3 V3.0 combo?
The BIGTREETECH SKR Mini E3 V3.0 combo includes a TFT35 E3 V3.0.1 touch screen display. It allows users to switch between Marlin LCD emulator and touch screen modes by pressing and holding the selector wheel.
Is the OSOYOO Ramps 1.4 kit suitable for RepRap builds?
Yes, the OSOYOO Ramps 1.4 kit is designed to fit the entire electronics needed for a RepRap in one small package. It includes a modular design with plug-in stepper drivers and a Mega2560 board.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
