Choosing the right analog multiplexer depends on your channel count, voltage requirements, and whether you prefer breakout boards or bare ICs. These eight options range from 8-channel modules to 16-channel boards and bare chips, catering to different project scales and integration styles.
Whether you are expanding a microcontroller's input capacity or designing a custom circuit, selecting the correct package and voltage range is essential. This comparison helps you match the specific features of each product to your project needs.
Our 3 picks for different needs
DORHEA 12Pcs CD74HC4067 16CH Module
The 12-pack of CD74HC4067 boards provides a large supply of 16-channel multiplexers for complex projects.
Read the details
GODIYMODULES 3Pcs 74HC4051 8CH Module
The 74HC4051 modules support +/-5V analog inputs, making them suitable for differential signal applications.
Read the details
20PCS CD4051BE DIP-16 IC
The 20-pack of CD4051BE ICs allows users to solder chips directly onto custom boards for compact designs.
Read the detailsAll products, in detail
Ximimark 5Pcs CD74HC4067 16CH Module
This 5-pack of breakout boards uses the CD74HC4067 chip to route one of 16 channels to a common pin. It supports both analog and digital signals with bidirectional switching and break-before-make logic to prevent crosstalk. The board breaks out the enable pin for complete disconnection.
Ideal for hobbyists needing multiple units for complex routing or spare parts.
- Uses CD74HC4067 chip for 16-channel selection
- Includes 5 breakout boards in the package
DORHEA 12Pcs CD74HC4067 16CH Module
A 12-pack of CD74HC4067 breakout boards designed for 16-channel analog and digital switching. The modules feature low on-resistance and low off-leakage with bidirectional internal switches. They allow users to connect up to 16 sensors using only 5 microcontroller pins. Suitable for larger projects requiring multiple multiplexers or for users who want a bulk supply of identical modules.
- Package contains 12 breakout boards
- Supports TTL level serial data routing
GODIYMODULES 3Pcs 74HC4051 8CH Module
This 3-pack of 74HC4051 modules offers 8-channel analog multiplexing with a wide input voltage range of +/-5V. It features logic level translation to allow 5V digital control of +/-5V analog signals. The typical on-resistance is 80 ohms at 4.5V supply. Best for projects requiring differential analog signal routing or specific voltage translation capabilities.
- Wide analog input range of +/-5V
- Includes logic level translation for 5V control
FainWan 5Pcs CD74HC4067 16CH Module
A 5-pack of CD74HC4067 breakout boards compatible with Arduino and other microcontrollers. The chip acts as a rotary switch, routing the common pin to one of 16 channels. It handles both digital and analog signals with bidirectional connections. The package provides multiple units for building complex signal routing systems or for redundancy in critical applications.
- Compatible with Arduino microcontrollers
- Package contains 5 breakout boards
HiLetgo CD74HC4067 16CH Module
A single CD74HC4067 breakout module for 16-channel analog and digital multiplexing. It allows users to collect 16 analog signals using a single ADC pin by selecting channels via 4 digital outputs. The board is designed for easy integration into DIY projects. Suitable for users who need a single unit to expand their microcontroller's input capacity without buying a bulk pack.
- Single unit package
- Routes 16 channels to one common pin
20PCS CD4051BE DIP-16 IC
A 20-pack of CD4051BE integrated circuits in DIP-16 packages. These are bare chips rather than breakout boards, requiring soldering for integration. They feature low on-resistance and a compact design suitable for tight spaces. Ideal for users who prefer to design their own PCBs or need a large quantity of ICs for production runs.
- Bare ICs in DIP-16 package
- Package contains 20 chips
Bridgold 10pcs CD4051 DIP-16 IC
A 10-pack of CD4051 CMOS ICs in DIP-16 packages. These chips support a wide range of digital levels from 3V to 20V and feature binary address decoding on-chip. The high off-resistance minimizes channel leakage. Best for engineers who need bare ICs with specific voltage tolerances and want to integrate them into custom circuit designs.
- Digital levels range from 3V to 20V
- Package contains 10 DIP-16 chips
10pcs 74HC4051 8CH Module
A 10-pack of 74HC4051 breakout modules compatible with Raspberry Pi. These modules feature 8 channels with 3 digital selects and an active-low enable pin. The VCC to GND range is 2.0V to 10.0V. Suitable for users who need multiple 8-channel multiplexers for Raspberry Pi projects or who prefer modules over bare ICs for easier prototyping.
- Compatible with Raspberry Pi
- Package contains 10 breakout modules
Head-to-Head Comparisons
Ximimark vs DORHEA: 16-Channel Module Quantity
Both the Ximimark and DORHEA products use the CD74HC4067 chip for 16-channel multiplexing. The primary difference is the package quantity: Ximimark offers a 5-pack, while DORHEA provides a 12-pack. If you need multiple units for a large project or want spares, the DORHEA 12-pack offers more boards per purchase.
For smaller projects where a few units are sufficient, the Ximimark 5-pack may be a more manageable quantity. Both feature identical switching characteristics and bidirectional signal support.
GODIYMODULES vs 10pcs 74HC4051: Voltage and Compatibility
The GODIYMODULES 74HC4051 modules support a wide analog input range of +/-5V and include logic level translation for 5V control. In contrast, the 10pcs 74HC4051 modules specify a VCC to GND range of 2.0V to 10.0V and are explicitly noted as compatible with Raspberry Pi.
If your project involves differential analog signals or specific voltage translation, the GODIYMODULES version is better suited. For Raspberry Pi users needing standard 8-channel multiplexing, the 10pcs 74HC4051 modules offer a straightforward compatible option.
CD4051BE vs CD4051: Bare IC Specifications
Both the 20PCS CD4051BE and Bridgold 10pcs CD4051 are bare ICs in DIP-16 packages. The CD4051BE features a low on-resistance of 125 ohms over a 15V peak-to-peak signal range. The Bridgold CD4051 supports digital levels from 3V to 20V and has a channel leakage of +/-100pA.
The choice depends on your specific voltage and leakage requirements. The CD4051BE is listed with a 20-pack quantity, while the Bridgold version comes in a 10-pack, affecting the total number of chips available for your project.
Buying Guide
Channel Count and Signal Type
Determine if you need 8 or 16 channels based on your sensor count. 16-channel modules like the CD74HC4067 allow you to connect more sensors using fewer microcontroller pins. 8-channel modules like the 74HC4051 are simpler but require more pins for the same number of sensors.
Consider whether you are routing analog or digital signals, as both types of multiplexers support bidirectional switching for these signal types.
Voltage Range and Compatibility
Check the voltage specifications to ensure compatibility with your microcontroller and sensors. Some modules support wide ranges like +/-5V for analog inputs, while others specify digital control ranges from 2V to 10V. If you are using a Raspberry Pi or Arduino, verify that the multiplexer's logic levels match your board's output voltage to avoid damage or unreliable switching.
Breakout Boards vs Bare ICs
Decide if you need pre-soldered breakout boards or bare ICs. Breakout boards are easier to use for prototyping and breadboard projects, as they have headers for easy connection. Bare ICs in DIP packages require soldering but offer more flexibility for custom PCB design and compact layouts.
If you are building a permanent device, bare ICs may be more suitable, while boards are better for quick testing.
Package Quantity and Project Scale
Consider how many multiplexers you need for your project. Some products are sold in single units, while others come in packs of 3, 5, 10, or 20. For large projects requiring multiple multiplexers, buying in bulk may be more convenient. For small projects, a single unit or small pack may be sufficient.
Check the package contents to ensure you are buying the right quantity for your needs.
Frequently Asked Questions
Can I use these multiplexers with digital signals?
Yes, most of these multiplexers support both analog and digital signals. The internal switches are bidirectional, allowing you to route TTL level serial data or other digital signals between multiple devices and a single microcontroller pin.
What is the difference between a multiplexer and a demultiplexer?
A multiplexer combines multiple input signals into one output, while a demultiplexer splits one input into multiple outputs. Many chips, like the CD74HC4067, function as both because the switches are bidirectional, allowing signal flow in either direction.
Do I need to solder these components?
It depends on the product type. Breakout boards with headers do not require soldering for basic use, as you can plug them into a breadboard. Bare ICs in DIP packages require soldering to integrate them into a circuit or custom PCB.
How many microcontroller pins do I need to control a 16-channel multiplexer?
You need 4 digital output pins to control the address select lines (S0-S3) for a 16-channel multiplexer. This allows you to select any of the 16 channels using binary addressing, significantly reducing the number of pins required compared to direct connections.
This article is part of our complete guide Electronics — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
