Selecting the right annular cutter depends on the specific hole diameters and depths required for your project. These tools are designed to cut holes faster than standard drill bits by removing only the material at the edge, resulting in cleaner finishes.
The options listed here vary significantly in size range, cutting depth, and included accessories. Some sets focus on a wide assortment of standard sizes, while others target larger diameters or deeper cuts. Reviewing the specific dimensions and shank compatibility will help you match the tool to your magnetic drill or drill press setup.
Our pick: S&F STEAD & FAST 13-Piece Annular Cutter Set. The 13-piece S&F set provides 11 different sizes from 7/16" to 1-1/16" for users needing a wide assortment of standard diameters.
Our 3 picks for different needs
S&F STEAD & FAST 13-Piece Annular Cutter Set
The 13-piece S&F set provides 11 different sizes from 7/16" to 1-1/16" for users needing a wide assortment of standard diameters.
Read the details
S&F STEAD & FAST 6-Piece Large Diameter Set
The S&F 6-piece set offers diameters up to 2" with a 2-inch depth of cut, suitable for larger and deeper hole requirements.
Read the details
Evolution CC625 5/8" Annular Cutter
The Evolution CC625 is a single 5/8" cutter ideal for replacing a specific bit or adding one size to an existing collection.
Read the detailsAll products, in detail
S&F STEAD & FAST 13-Piece Annular Cutter Set
This 13-piece kit offers a wide range of outside diameters from 7/16" to 1-1/16" with a 1-inch cutting depth. Constructed from M2AL high-speed steel, these CNC-machined cutters are designed for clean, burr-free holes in metal. The set includes 11 cutters, 2 pilot pins, a hex wrench, and a solid metal case.
It is suitable for users needing a comprehensive assortment of standard sizes for single-layer drilling applications.
- Includes 11 outside diameters ranging from 7/16" to 1-1/16".
- Features a 3/4" Weldon shank with 2 flats for secure clamping.
6-Piece Annular Cutter Set 1" Depth
This six-piece set covers common sizes from 1/2" to 1-1/16" with a 1-inch cutting depth. Made from M2 high-speed steel, the cutters are designed for use with magnetic drill machines. The kit includes a 1/4" hex wrench and two pilot pins. It is positioned as a cost-effective combination for users who need a smaller selection of frequently used diameters for industrial or repair work.
- Includes six sizes: 1/2", 9/16", 11/16", 13/16", 15/16", and 1-1/16".
- Compatible with magnetic drill brands including Alfra, BDS, Dewalt, and VEVOR.
S&F STEAD & FAST 6-Piece Large Diameter Set
Targeting deeper and larger holes, this set includes six cutters ranging from 7/8" to 2" with a 2-inch cutting depth. The M2AL high-speed steel construction supports professional metalworking tasks. It comes with two pilot pins and a sturdy aluminum carrying case. This option is ideal for users who require larger hole diameters and deeper penetration capabilities than standard 1-inch depth sets provide.
- Features six large diameters from 7/8" to 2" with 2" depth of cut.
- Includes a sturdy aluminum carrying case for storage and transport.
VEVOR 13-Piece Weldon Shank Annular Cutter Set
This 13-piece kit includes 11 Weldon shank cutters from 7/16" to 1-1/16" with a 1-inch cutting depth. The design features pointed and flat blades to distribute load and speed up cutting. It includes two pilot pins of different sizes and a hex wrench in a portable foam-lined case.
The VEVOR set is designed for smooth chip ejection and efficient drilling across various materials.
- Includes 11 cutters with 1" cutting depth and two different pilot pin sizes.
- Features a portable case with foam design for tool security.
S&F STEAD & FAST 6-Piece Standard Set 1" Depth
Made from M2AL high-speed steel, the bits are designed for standard-depth metal drilling. The kit includes one pilot pin, a hex wrench, and a sturdy plastic carrying case. It is a focused selection for users who need a compact set of common sizes for routine drilling tasks.
- Includes six sizes: 1/2", 9/16", 11/16", 13/16", 15/16", and 1-1/16".
- Comes with one pilot pin and a sturdy plastic carrying case.
S&F STEAD & FAST 6-Piece Standard Set 2" Depth
This set offers six cutters from 7/16" to 1-1/16" but with a 2-inch cutting depth for deeper applications. The M2AL high-speed steel construction ensures durability and wear resistance. It includes two pilot pins, a hex wrench, and a sturdy plastic case. This option is suitable for users who need the same standard size range as the 1-inch depth set but require greater penetration capability.
- Features six sizes from 7/16" to 1-1/16" with 2" depth of cut.
- Includes two pilot pins and a hex wrench in a plastic case.
ANGELSWORD 14-Piece M2 HSS Annular Cutter Set
This 14-piece set is made from M2 high-speed steel for wear resistance and clean cuts. The listing specifies a 1-inch cutting depth for the mag drill bits. While the specific size range is not detailed in the provided features, the high piece count suggests a broad assortment of diameters.
It is designed for users seeking a large quantity of cutters for varied drilling needs.
- Contains 14 pieces of M2 high-speed steel annular cutters.
- Specified with a 1-inch cutting depth.
Evolution CC625 5/8" Annular Cutter
This single cutter features a 5/8" diameter and 1-inch depth of cut. Made from M2AL high-speed steel, it has a 3/4" Weldon shank with two flats that fits most standard magnetic drill presses. The package includes a free pilot pin. It is a specific replacement or addition for users who already own a magnetic drill and need this exact size.
- Single cutter with 5/8" diameter and 1" depth of cut.
- Includes a free pilot pin and features a 3/4" Weldon shank.
Head-to-Head Comparisons
S&F 13-Piece vs VEVOR 13-Piece: Case and Blade Design
Both the S&F and VEVOR sets include 11 cutters ranging from 7/16" to 1-1/16" with a 1-inch cutting depth. The primary distinction lies in the case and blade geometry. The S&F set comes in a solid metal case, while the VEVOR set features a portable case with foam lining and a handle.
The VEVOR cutters are described as having pointed and flat blades to distribute load, whereas the S&F cutters are noted for CNC machining for a clean finish. Choose the S&F set if you prefer a metal case, or the VEVOR set if you prioritize a foam-lined portable case.
S&F 1-Inch Depth vs 2-Inch Depth: Penetration Capability
These two S&F sets offer similar size ranges but differ in cutting depth. If your work involves drilling through thicker materials, the 2-inch depth set provides more penetration capability. If you only need standard shallow holes, the 1-inch depth set is sufficient.
6-Piece Sets: Pilot Pins and Case Material
Both the 6pcs Annular Cutter Set and the S&F STEAD & FAST 6-Piece Standard Set are six-piece assortments with a 1-inch cutting depth. The 6pcs Annular Cutter Set includes two pilot pins and a 1/4" hex wrench, while the S&F STEAD & FAST set includes one pilot pin and a hex wrench.
The S&F STEAD & FAST set comes in a sturdy plastic case, whereas the case material for the 6pcs Annular Cutter Set is not specified in the provided features. The 6pcs Annular Cutter Set is described as a cost-effective combination, while the S&F STEAD & FAST set is part of the S&F STEAD & FAST line.
Buyers should consider the number of pilot pins and case preferences when choosing between these two.
Buying Guide
Determine Required Hole Diameter Range
Identify the smallest and largest hole diameters you need to cut. Sets vary from 6 to 14 pieces, covering ranges from 1/2" to 2". A 13-piece set offers more size options, while a 6-piece set is more compact. Ensure the set includes the specific sizes required for your projects to avoid needing additional single cutters later.
Select Appropriate Cutting Depth
Cutting depth, or depth of cut (DOC), determines how thick a material you can drill through. Most sets offer either 1-inch or 2-inch depths. If you are drilling through thin sheet metal, a 1-inch depth is usually sufficient. For thicker plates or deeper holes, a 2-inch depth set is necessary.
Check the DOC specification for each cutter in the set to ensure it meets your material thickness requirements.
Verify Shank Compatibility
Most annular cutters use a 3/4" Weldon shank with two flats, which is compatible with many magnetic drill brands. However, some sets may have different shank specifications. Confirm that the shank type matches your magnetic drill or drill press. If using a drill press, note that an additional annular cutter arbor may be required, which is often not included in the set.
Consider Included Accessories
Sets vary in the accessories included, such as pilot pins, hex wrenches, and carrying cases. Pilot pins are essential for positioning and securing the workpiece. Some sets include two pilot pins of different sizes, while others include only one. A sturdy carrying case helps with storage and transport.
Evaluate which accessories are most important for your workflow when comparing sets.
Frequently Asked Questions
What is the difference between M2 and M2AL high-speed steel?
Both M2 and M2AL are high-speed steels used for annular cutters. M2AL is often described as having enhanced durability and wear resistance. The specific performance differences can vary, but both materials are designed for long service life in metalworking applications.
Can I use these cutters in a standard drill press?
Yes, but you may need an additional annular cutter arbor. The Weldon shank fits magnetic drills directly, but drill presses often require an arbor to hold the cutter. Check if an arbor is included in the set or if you need to purchase one separately.
How many pilot pins are included in these sets?
The number of pilot pins varies by set. Some sets include one pilot pin, while others include two. The VEVOR set includes two pilot pins of different sizes. Pilot pins are used for positioning and securing the workpiece during drilling.
Are these cutters suitable for drilling through multiple layers of material?
No, annular bits are for single-layer drilling only. You must secure the workpiece firmly and ensure you are drilling through a single layer of material. Drilling through multiple layers can cause the cutter to jam or break.
This article is part of our complete guide Tools & Home Improvement — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
