Selecting the correct bevel gear requires matching the module, tooth count, and shaft diameter to your existing machinery or project design. These components are critical for transmitting power between shafts at specific angles, and using the wrong size can prevent proper meshing or cause mechanical failure.
This comparison covers eight options ranging from small RC car parts to larger industrial steel gears. Each product varies in material, module size, and gear ratio, allowing you to identify the specific configuration needed for your application. Check the live product cards for current pricing and availability.
Our 3 picks for different needs
uxcell 90 Degree Bevel Gearbox 1 Module 20T
The uxcell 90-degree gearbox offers a pre-assembled aluminum frame unit with a 10mm shaft for simple mechanical projects.
Read the details
uxcell Tapered Bevel Gear 1 Mod 1:2 8mm
The uxcell 1:2 ratio set provides a 20T/40T configuration in hardened steel for applications requiring a specific reduction.
Read the details
CNBTR Copper Bevel Gear 0.8 Module 15T 3mm
The CNBTR copper gears come in a pack of six with screws, suitable for model cars and small transmission setups.
Read the detailsAll products, in detail
BQLZR Tapered Bevel Gear 0.8 Module 15T 3mm
This pack of six tapered bevel gears is designed for RC car applications. The listing specifies a 0.8 module with 15 teeth and a 3mm inner diameter. The compact size and small shaft hole make it suitable for small-scale mechanical models where space is constrained.
Buyers looking for a multi-pack of small gears for hobbyist or model car builds will find this configuration appropriate for those specific dimensions.
- Includes 6 gears in the pack
- 0.8 Module with 15 teeth and 3mm inner diameter
uxcell Bevel Gear 0.8 Module 15T 4mm Steel
This set of two bevel gears is made from 45# steel with a quenching and blackening process for wear resistance. It features a 1:1 reduction rate, 15 teeth, and a 4mm shaft hole. The 45-degree steering angle is specified for this variant. The listing notes these gears are for use with 1:1 gears only and cannot be used with other gear modules.
It is suitable for hardware mechanical rotation and various industrial transmission occasions.
- Made of 45# steel with quenching and blackening
- 1:1 ratio, 15 teeth, 4mm shaft hole, 45-degree angle
uxcell 90 Degree Bevel Gearbox 1 Module 20T
This product is a 90-degree right-angle bevel gearbox with a single output shaft. It features an aluminum frame and a 10mm shaft made of 45# stainless steel. The internal gears are 1 module with 20 teeth and a 1:1 ratio. The listing describes it as a simple steering gear suitable for DIY mechanical applications but notes it cannot be used for high torque or high rotating speed CNC applications.
It is designed for right-angle turns and corner steering mechanisms.
- Aluminum frame with 10mm stainless steel shaft
- 1 module, 20 teeth, 1:1 ratio, 90-degree angle
CNBTR Copper Bevel Gear 0.8 Module 15T 3mm
This set of six copper transmission bevel gears includes screws for easy installation. The gears have a 0.8 pattern die with 15 teeth and a 3mm inner hole. The listing highlights characteristics such as long life, high load bearing capacity, noise reduction, and shock absorption.
It is widely used in transportation, hardware, agricultural equipment, and model cars. The note emphasizes that only gears with the same module can mesh with each other.
- Copper material with included screws
- 0.8 module, 15 teeth, 3mm inner hole
uxcell Bevel Gear 0.8 Module 15T 5mm Steel
Similar to the 4mm variant, this set of two bevel gears is made from 45# steel with a quenching and blackening process. It features a 1:1 reduction rate, 15 teeth, and a 5mm shaft hole. The 45-degree steering angle is specified. The listing states these gears are for use with 1:1 gears only and cannot be used with any other gear module.
It is suitable for agricultural equipment, textile machinery, and other mechanical transmission occasions.
- Made of 45# steel with quenching and blackening
- 1:1 ratio, 15 teeth, 5mm shaft hole, 45-degree angle
uxcell Tapered Bevel Gear 1 Mod 1:2 8mm
This set of two tapered bevel gears is made from hardened 45# steel with a quenched and blackened tooth surface. It features a 1 module, 1:2 ratio (20T/40T), and 8mm shaft holes. The steering angle is 90 degrees. The listing notes that this 1:2 ratio set can only be used with 1:2 gear wheels and cannot match other moduli.
It is suitable for agricultural equipment, textile machinery, and other mechanical transmission occasions.
- Hardened 45# steel with quenched and blackened surface
- 1 module, 1:2 ratio (20T/40T), 8mm shaft holes, 90-degree angle
PGFUN Tapered Bevel Gear 1.5M 20T 12mm
This tapered bevel gear is made from 45# steel with a quenching and blackening process for wear resistance. The specific variant listed has a 1.5 module, 20 teeth, 12mm shaft hole, and M5 fixing hole. The steering angle is 90 degrees. The listing notes that one bevel gear only matches the other same scale gear, so a set should be replaced together.
It is widely applied in agricultural equipment, textile machinery, and automotive industries.
- 1.5 module, 20 teeth, 12mm shaft hole, M5 fixing hole
- 45# steel with quenching and blackening, 90-degree angle
CNBTR Tapered Bevel Gear 1 Mod 20T 6mm
This pack of six tapered bevel gear wheels is made of steel material. The gears are 1 modulus with 20 teeth and a 6mm size. The listing describes the contact between gears as firm, ensuring normal operation and good bearing capacity. It is widely used in hardware, mold, and mechanical transmission industries.
The note specifies that this 1:1 bevel gear can only be matched with 1:1 gears and not with other modules or tooth numbers.
- Steel material, 1 modulus, 20 teeth, 6mm size
- Pack of 6 gears for hardware and mechanical transmission
Head-to-Head Comparisons
uxcell 4mm vs 5mm Shaft Hole Gears
Both the uxcell 4mm and 5mm bevel gears share the same 0.8 module, 15 teeth, 1:1 ratio, and 45-degree steering angle. The primary difference is the shaft hole diameter, which determines the size of the shaft they can fit onto. If your project uses a 4mm shaft, the 4mm variant is the correct choice, while the 5mm variant fits a larger shaft.
Both are made from 45# steel with a quenching and blackening process. Buyers must verify their shaft diameter to ensure compatibility, as these gears are not interchangeable with different shaft sizes.
BQLZR vs CNBTR 0.8 Module 3mm Gears
The BQLZR and CNBTR 0.8 module 15T 3mm gears are both designed for small-scale applications like RC cars and model vehicles. The BQLZR listing is specific to RC car parts, while the CNBTR listing describes the material as copper and includes screws for installation. The CNBTR pack of six may offer convenience for those needing multiple replacements or a full set.
Both share the same module and tooth count, ensuring they can mesh with each other if needed. The choice depends on whether you prefer the specific RC branding of BQLZR or the copper material and included hardware of CNBTR.
uxcell 1:2 Ratio vs PGFUN 1:1 Ratio
The uxcell 1:2 ratio set and the PGFUN 1:1 ratio gear serve different mechanical functions. The uxcell set features a 1 module with 20T/40T teeth, providing a 1:2 reduction, while the PGFUN gear is a 1.5 module with 20 teeth and a 1:1 ratio. The PGFUN gear has a larger 12mm shaft hole and an M5 fixing hole, whereas the uxcell set has 8mm shaft holes.
The steering angle is 90 degrees for both. Buyers must choose based on the required gear ratio and shaft size, as these two products are not compatible with each other due to different modules and ratios.
Buying Guide
Match the Module and Tooth Count
Bevel gears only mesh with other gears of the same module and compatible tooth counts. The listings provided include 0.8 module, 1 module, and 1.5 module options. You must verify the module of your existing gear or design requirement before purchasing. For example, a 0.8 module gear cannot mesh with a 1 module gear.
Check the tooth count as well, as it affects the gear ratio and overall size of the transmission.
Verify Shaft Diameter and Hole Size
The shaft hole diameter must match the diameter of the shaft you intend to use. Options in this comparison range from 3mm to 12mm. A 3mm hole is suitable for small model parts, while a 12mm hole is for larger industrial applications. Ensure the gear's inner diameter is compatible with your shaft size.
Some listings, like the PGFUN gear, also include fixing holes for additional mounting options, which may be necessary for your setup.
Consider Material and Durability
Most of the steel gears in this comparison are made from 45# steel with a quenching and blackening process to improve wear resistance. The CNBTR option is made of copper, which may offer different friction characteristics. The uxcell gearbox features an aluminum frame with a stainless steel shaft.
Choose the material based on the load and environmental conditions of your application. Steel is generally more durable for high-load industrial use, while copper may be preferred for specific model applications.
Check Gear Ratio and Steering Angle
The gear ratio determines the speed and torque output, while the steering angle determines the angle between the shafts. Most options here are 1:1 ratio, but the uxcell 1:2 set provides a reduction. The steering angle is either 45 degrees or 90 degrees. You must select the angle that matches your mechanical design.
A 90-degree angle is common for right-angle power transmission, while 45 degrees is used for specific steering mechanisms. Ensure the ratio and angle align with your project requirements.
Frequently Asked Questions
Can I mix gears from different brands?
Yes, provided they have the same module, tooth count, and compatible geometry. The listings note that only gears with the same module can mesh with each other. For example, a 0.8 module gear from one brand can mesh with a 0.8 module gear from another, but not with a 1 module gear.
What is the difference between 45-degree and 90-degree gears?
The steering angle refers to the angle between the two shafts. A 90-degree gear is used for right-angle power transmission, while a 45-degree gear is used for specific steering mechanisms. You must choose the angle that matches your mechanical design requirements.
Are these gears suitable for high-torque applications?
The uxcell gearbox listing notes it is a simple steering gear and cannot be used for high torque or high rotating speed CNC applications. Other steel gears may handle higher loads, but you should verify the specific load capacity for your application. The material and size will influence the load-bearing capacity.
Do these gears come with mounting hardware?
The CNBTR 0.8 module copper gears come with screws for easy installation. The PGFUN gear has an M5 fixing hole for mounting. Other listings do not specify included hardware, so you may need to provide your own fasteners. Check the product details for what is included in the pack.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
