Industrial & Scientific

Brass Metal Raw Materials: 7 Sheet, Rod, and Bar Options Compared

This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.

Product details come from Amazon listings. Compare the specifications that matter to you, and check the current price and availability on Amazon before buying. How we compare

Selecting the right brass metal raw material depends on the specific geometry and mechanical properties required for your project. Whether you need flat sheets for decorative accents, round rods for machining, or thin foil for detailed crafting, the form factor and alloy composition significantly impact usability.

This comparison examines seven distinct brass stock options, ranging from H62 sheets and pure brass plates to free-cutting rods and assorted dowels. Each product offers different dimensions and material grades, allowing you to match the raw material to your specific manufacturing or DIY needs.

AT A GLANCE

Our 3 picks for different needs

Coolneon 1/2 inch Brass Rods 1/2 x 12 in, 1 Pc for Knife Making Knife Handles Pins Stock Knife Scale...
03Machining and Turning

Coolneon 1/2 Inch x 12 Inch Solid Brass Rod

The Coolneon 1/2 inch rod is free-cutting and half-hard, making it suitable for milling, drilling, and turning operations.

Read the details
uxcell Brass Sheet Roll, 0.3x10x1000mm Brass Foil Roll Brass Strip Gold for Crafts, Electrical...
02Thin Foil Crafting

uxcell 0.3mm Brass Foil Roll 10mm x 1m

The uxcell 0.3mm foil roll is flexible and thin, ideal for laser cutting patterns and detailed decorative work.

Read the details
2 Pack Brass Sheets, 4 x 8 Inch, 20 Gauge, 0.8mm Thick
04High Conductivity Sheets

2 Pack 4×8 Inch 20 Gauge Pure Brass Sheets

The Sunkoo 4x8 inch sheets are 99.9% pure brass, offering high thermal and electrical conductivity for electronic repairs.

Read the details

All products, in detail

2 Pcs Brass Sheet, 6' x 6', 24 Gauge(0.5mm) Thickness, No Scratches, Film Attached Brass Plates
01

2 Pcs 6×6 Inch 24 Gauge H62 Brass Sheets

This pack includes two 6-inch by 6-inch brass sheets with a 0.5mm thickness, made from H62 brass with 62% copper content. The material is noted for being easy to cut and comes with a protective blue film on both sides to prevent surface scratches. The edges may be slightly sharp due to the cutting process, so handling care is advised.

This option suits buyers needing small, flat brass plates for basic crafting or light-duty applications where a standard H62 composition is sufficient.

  • H62 brass with 62% average copper content
  • Includes protective blue film on both sides
uxcell Brass Sheet Roll, 0.3x10x1000mm Brass Foil Roll Brass Strip Gold for Crafts, Electrical...
02Thin Foil Crafting

uxcell 0.3mm Brass Foil Roll 10mm x 1m

The uxcell brass sheet roll measures 10mm in width and 1000mm in length with a thin 0.3mm thickness. Made from H62 brass, it offers good weldability, plasticity, and corrosion resistance, making it suitable for conductive applications. The flexible nature of the foil allows it to be twisted, bent, or torn for use in laser cutting, welding, and brazing.

This product is ideal for detailed crafting, wedding arrangements, or electronic experiments where a thin, malleable brass strip is required.

  • 0.3mm thickness with 10mm width and 1m length
  • Flexible foil suitable for laser cutting and bending
Coolneon 1/2 inch Brass Rods 1/2 x 12 in, 1 Pc for Knife Making Knife Handles Pins Stock Knife Scale...
03Machining and Turning

Coolneon 1/2 Inch x 12 Inch Solid Brass Rod

This single 1/2-inch diameter brass rod measures 12 inches in length and is composed of 60% copper and 40% zinc. It is a free-cutting, half-hard brass rod rated for high machinability, making it suitable for milling, drilling, tapping, and turning. The rod polishes to a gold-like finish and is non-sparking, which is beneficial for specific industrial or safety-conscious environments.

It is not suitable for food or drinking water applications. This option fits machinists and hobbyists needing a standard round stock for knife handles, pins, or dowels.

  • 1/2 inch diameter and 12 inch length
  • Free-cutting half-hard brass with 100% machinability rating
2 Pack Brass Sheets, 4 x 8 Inch, 20 Gauge, 0.8mm Thick
04High Conductivity Sheets

2 Pack 4×8 Inch 20 Gauge Pure Brass Sheets

This set contains two 4-inch by 8-inch brass sheets with a 0.8mm thickness, crafted from 99.9% pure brass. The high purity provides outstanding thermal and electrical conductivity along with strong corrosion resistance. The sheets feature a smooth, double-sided film-protected surface that allows for effortless cutting with shears or industrial tools and smooth welding.

This product is well-suited for DIY jewelry making, precision model building, or electronic repairs where high conductivity and a pristine surface finish are priorities.

  • 99.9% pure brass with 0.8mm thickness
  • Double-sided film protection for scratch-free storage
Pelopy 2 Pcs Metal Brass Square Bar Solid Brass Flat Bar Stock for Knife Making, DIY Crafts(1 x 1 x...
05

Pelopy 2 Pcs 1x1x5 Inch Brass Flat Bars

The Pelopy pack includes two solid brass flat bars measuring approximately 1 inch by 1 inch by 5 inches. The material is described as durable with a robust feel and a golden color that enhances its visual appeal for decorative projects. The square cross-section makes it easy to handle for a variety of DIY tasks, from intricate design work to larger structural elements.

This option is a practical choice for crafters and DIY enthusiasts looking for a simple, solid brass stock for general-purpose making or as a gift for hobbyists.

  • 1 inch x 1 inch x 5 inch square cross-section
  • Pack of two solid brass bars
Coolneon Brass Rods 1.5, 2, 2.5, 3, 4, 5, 6, 8mm, L=120mm 24 Pcs Assortment for Knife Making Knife...
06

Coolneon 24 Pcs Assorted Brass Rods 1.5-8mm

This assortment includes 24 brass rods in eight different diameters ranging from 1.5mm to 8mm, each 120mm in length. The rods are made from premium brass with 60% copper and 40% zinc, offering high strength and corrosion resistance. They are free-cutting and half-hard, making them ideal for milling, drilling, and turning.

The variety of sizes allows for precise selection of dowels, rivets, or pins for knife making, gunsmithing, or modeling. This kit is useful for hobbyists who need multiple small-diameter rod sizes for varied projects.

  • 24 pieces in 8 sizes from 1.5mm to 8mm
  • 120mm length per rod
LEXININ 2 Pcs 3/8 x 1 x 6 Inch Brass Flat Bar Stock, Rectangular Brass Bar, Long Solid Plate Mill...
07

LEXININ 2 Pcs 3/8x1x6 Inch Brass Flat Bars

The LEXININ pack features two rectangular brass flat bars measuring 3/8 inch by 1 inch by 5.9 inches. The material is noted for high strength and hardness, providing good processability and malleability. The bars are precision-cut with smooth edges and a polished surface, giving them a captivating golden hue suitable for decorative endeavors.

This stock is widely applied in DIY craft making, maintenance, electrical work, and architectural decoration. It suits buyers needing a rectangular profile with specific thickness for structural or decorative applications.

  • 3/8 inch x 1 inch x 5.9 inch rectangular profile
  • Precision-cut with polished surface and smooth edges

Head-to-Head Comparisons

H62 Sheets vs 99.9% Pure Brass Sheets

The 2 Pcs 6×6 Inch H62 Brass Sheets and the 2 Pack 4×8 Inch 20 Gauge Pure Brass Sheets both offer flat brass stock but differ in alloy composition and size. The H62 sheets are 6 inches by 6 inches with 0.5mm thickness, while the pure brass sheets are 4 inches by 8 inches with 0.8mm thickness.

The pure brass option claims 99.9% purity for higher conductivity, whereas the H62 sheets specify 62% copper content. If your project requires maximum electrical conductivity, the pure brass sheets are the documented choice. If you need a larger surface area for a single piece, the 6×6 inch H62 sheets provide more area per sheet.

Single Large Rod vs Assorted Small Rods

The Coolneon 1/2 Inch x 12 Inch Solid Brass Rod and the Coolneon 24 Pcs Assorted Brass Rods both use the same premium brass composition with 60% copper. The single rod is 1/2 inch in diameter and 12 inches long, suitable for larger structural components or knife handles.

The assortment includes 24 rods in sizes from 1.5mm to 8mm, each 120mm long. The single rod is better for projects requiring a specific large diameter, while the assortment is ideal for hobbyists needing various small dowels or rivets. Both are free-cutting and half-hard, ensuring similar machining performance.

Square Flat Bars vs Rectangular Flat Bars

The Pelopy 2 Pcs 1x1x5 Inch Brass Flat Bars and the LEXININ 2 Pcs 3/8x1x6 Inch Brass Flat Bars both provide rectangular brass stock but with different cross-sections. The Pelopy bars are square, measuring 1 inch by 1 inch, while the LEXININ bars are rectangular, measuring 3/8 inch by 1 inch.

The square profile offers uniform thickness on all sides, which can be advantageous for certain structural applications. The rectangular profile provides a thinner dimension, which may be preferable for fitting into tighter spaces or for decorative inlays. Both are solid brass and suitable for DIY crafts and maintenance.

Buying Guide

Alloy Composition and Purity

Brass alloys vary in copper and zinc content, which affects their properties. H62 brass typically contains 62% copper, offering a balance of strength and corrosion resistance. Pure brass, such as the 99.9% option, provides higher thermal and electrical conductivity. For electrical grounding or conductive applications, higher purity is generally preferred.

For structural or decorative uses where strength is key, standard H62 or 60/40 brass may be more appropriate. Check the specific alloy designation on the product listing to ensure it matches your project requirements.

Form Factor and Dimensions

The physical shape of the brass stock determines its application. Sheets are best for flat surfaces, inlays, or large-area coverage. Rods are ideal for cylindrical components like pins, dowels, or shafts. Flat bars offer a rectangular profile for structural or decorative elements. Foil rolls provide thin, flexible material for detailed crafting or wrapping.

Consider the final shape of your project and select the raw material that minimizes waste and machining time. Ensure the dimensions, including thickness, width, and length, align with your design specifications.

Machinability and Workability

Some brass stocks are rated for high machinability, meaning they are free-cutting and easier to machine with tools like mills, lathes, or drills. Free-cutting brass reduces tool wear and allows for faster production. Other stocks may be softer or more malleable, suitable for bending, twisting, or forming without cutting.

If your project involves complex machining, look for rods or bars described as free-cutting or half-hard. For simple bending or forming, a more plastic or flexible material may be easier to work with.

Surface Finish and Protection

The surface condition of the brass stock affects both aesthetics and handling. Many sheets and bars come with a protective film on both sides to prevent scratches during shipping and storage. This is particularly important for decorative applications where a polished finish is desired. Some products are noted for having smooth edges and a polished surface, which can reduce the need for post-machining finishing.

If you plan to use the brass in a visible application, verify that the surface is protected and free from defects.

Frequently Asked Questions

Is H62 brass suitable for electrical applications?

H62 brass has good conductivity and is often used for conductive applications. However, if maximum conductivity is required, 99.9% pure brass sheets may be a better choice. Check the specific conductivity requirements of your project and compare them with the alloy composition provided in the product details.

Can I machine free-cutting brass rods with standard tools?

Yes, free-cutting brass rods are designed to be machined easily with standard milling, drilling, and turning tools. They are rated for high machinability, which reduces tool wear and allows for efficient production of parts like pins, dowels, and shafts.

What is the difference between a brass sheet and a brass foil roll?

A brass sheet is typically thicker and more rigid, suitable for structural or large-area applications. A brass foil roll is much thinner and more flexible, allowing it to be bent, twisted, or torn. Foil is ideal for detailed crafting, wrapping, or applications requiring malleability.

Are these brass products suitable for food contact?

Some products, such as the Coolneon rods, explicitly state they are not suitable for use with food or drinking water. Always check the specific product description for food safety certifications or warnings before using brass in any food-related application.

Last update on 2026-11-20 / Affiliate links / Images from Amazon Product Advertising API

Was this article helpful?

Thanks for your feedback!

Thanks — we'll work to improve this article.

Kylan Shields

Kylan Shields

Kylan Shields is the editorial byline of Tossions. Comparisons published under this name are compiled from Amazon listing data (specifications, customer ratings and availability), not from hands-on testing.