Selecting the right brass sheet depends on the specific requirements of your project, from delicate jewelry to robust industrial components. The primary variables to consider are the gauge, which determines thickness and rigidity, and the physical dimensions of the sheet.
This comparison examines eight different brass sheet options available for purchase. Each product varies in size, thickness, and quantity, allowing you to match the material to your specific cutting, bending, or welding needs.
Our 3 picks for different needs
Tandefio 2 Pcs 12×6 Inch 14 Gauge Brass Sheet
The 12x6 inch size and 14 gauge thickness provide ample material for larger structural or electrical projects.
Read the details
Conderyang 6 Pcs 12×6 Inch 26 Gauge Brass Sheet
The pack of six 26 gauge sheets offers a larger quantity for detailed jewelry or model making tasks.
Read the details
4 Pcs 6×6 Inch 18 Gauge Brass Sheet
The 18 gauge thickness and pack of four sheets suit projects requiring durable, weldable brass components.
Read the detailsAll products, in detail
2 Pcs 6×6 Inch 24 Gauge Brass Sheet
This set includes two 6-inch by 6-inch brass sheets with a 24 gauge thickness of 0.5mm. Made from H62 brass with 62% copper content, the material is noted for being easy to cut. Each sheet features a blue protective film on both sides to prevent surface scratches.
The listing notes that cut edges may be slightly sharp, so users should handle them with care. This size and thickness suit small-scale projects where precise cutting is required.
- 24 Gauge (0.5mm) thickness
- 6 inch by 6 inch dimensions
Tandefio 2 Pcs 12×6 Inch 14 Gauge Brass Sheet
The Tandefio pack provides two 12-inch by 6-inch brass sheets with a 14 gauge thickness of 0.06 inches. Constructed from H62 brass, these plates offer good mechanical properties and plasticity in both hot and cold states. The material is described as suitable for brazing and welding, making it a robust choice for engineering and electrical projects.
The larger surface area supports diverse applications ranging from DIY crafts to motor shafts and gear construction.
- 14 Gauge (0.06 inch) thickness
- 12 inch by 6 inch dimensions
2 Pcs 8×10 Inch 24 Gauge Brass Sheet
This offering contains two 8-inch by 10-inch brass sheets at 24 gauge, or 0.5mm thickness. The H62 brass composition includes an average of 62% copper, which facilitates easy cutting for custom shapes. Both sides of each sheet are covered with a blue protective film to shield the surface from damage during storage or transport.
The rectangular shape provides a larger working area than square options, suitable for projects requiring more material coverage.
- 24 Gauge (0.5mm) thickness
- 8 inch by 10 inch dimensions
Conderyang 6 Pcs 12×6 Inch 26 Gauge Brass Sheet
The Conderyang set includes six 12-inch by 6-inch brass sheets with a 26 gauge thickness of 0.4mm. These sheets feature single-sided lamination and are described as easy to bend, cut, or drill while retaining a flat shape. The H62 brass material is noted for its corrosion resistance and stable mechanical properties.
This quantity and thin gauge make the set suitable for model makers, artists, and those working on detailed craft or jewelry projects.
- 26 Gauge (0.4mm) thickness
- Pack of 6 sheets
2 Pcs 6×6 Inch 18 Gauge Brass Sheet
This product offers two 6-inch by 6-inch brass sheets with a 18 gauge thickness of 1mm. The H62 brass material is easy to cut and comes with a blue protective film on both sides to prevent scratches. The thicker gauge provides more structural rigidity compared to 24 gauge options, making it suitable for projects requiring sturdier components.
Users should be aware that the cut edges may be sharp and require careful handling.
- 18 Gauge (1mm) thickness
- 6 inch by 6 inch dimensions
2 Pcs 6×6 Inch 20 Gauge Brass Sheet
This listing provides two 6-inch by 6-inch brass sheets with a 20 gauge thickness of 0.8mm. Made from H62 brass with 62% copper content, the material is designed for easy cutting. Each sheet is protected by a blue film on both sides to maintain surface integrity.
The 20 gauge thickness offers a middle ground between the thinner 24 gauge and thicker 18 gauge options, providing flexibility for various DIY and industrial applications.
- 20 Gauge (0.8mm) thickness
- 6 inch by 6 inch dimensions
HYGMPDAS 2 Pcs 6×6 Inch 18 Gauge Brass Sheet
The HYGMPDAS set includes two 6-inch by 6-inch brass sheets with a 0.04 inch thickness, corresponding to 18 gauge. The solid H62 brass is described as sturdy and resistant to corrosion, bending, or denting. The sheets come coated with plastic film on both sides to prevent scratching.
This material is suitable for small home projects, jewelry making, and fabricating hardware pieces for furniture or electrical use.
- 18 Gauge (0.04 inch) thickness
- Solid H62 brass material
4 Pcs 6×6 Inch 18 Gauge Brass Sheet
This package contains four 6-inch by 6-inch brass sheets with a 18 gauge thickness of 1mm. The H62 brass material has good plasticity in both hot and cold states, making it ideal for brazing and welding. Double-sided protective film prevents scratches and oxidation. The flat cut allows users to trim the sheets to any size, supporting a wide range of applications from DIY crafts to industrial repairs.
- 18 Gauge (1mm) thickness
- Pack of 4 sheets
Head-to-Head Comparisons
24 Gauge vs 18 Gauge: Thin vs Thick 6×6 Sheets
Both the 24 gauge and 18 gauge options come in 6-inch by 6-inch squares, but they serve different structural purposes. The 24 gauge sheet is 0.5mm thick, making it easier to bend and shape for intricate designs or lightweight applications. In contrast, the 18 gauge sheet is 1mm thick, offering significantly more rigidity and strength for components that must withstand stress.
If your project requires a flat, stable base that resists bending, the 18 gauge is the appropriate choice. For projects where flexibility and ease of forming are priorities, the thinner 24 gauge sheet is more suitable.
Tandefio 14 Gauge vs Conderyang 26 Gauge: Size and Quantity
The Tandefio and Conderyang sheets share the same 12-inch by 6-inch footprint, but they differ in thickness and quantity. The Tandefio sheet is 14 gauge (0.06 inch) and comes in a pack of two, providing a thicker material for more substantial projects. The Conderyang sheet is 26 gauge (0.4mm) and comes in a pack of six, offering a thinner material in a larger quantity.
This makes the Conderyang set better for projects requiring many small pieces or detailed work, while the Tandefio set is better for fewer, larger, and sturdier components.
2 Pcs vs 4 Pcs: 18 Gauge 6×6 Sheet Quantity
Both the 2-piece and 4-piece 18 gauge sets offer 6-inch by 6-inch sheets with a 1mm thickness. The primary difference is the quantity included in the package. The 2-piece set provides a smaller amount of material, which may be sufficient for a single small project or testing a technique.
The 4-piece set doubles the material, reducing the need for multiple purchases if you are working on a larger project or require spare material for practice cuts. Buyers should assess their total material needs to determine if the larger quantity is necessary.
Buying Guide
Understanding Gauge and Thickness
Gauge indicates the thickness of the brass sheet, with lower numbers representing thicker material. For example, 14 gauge is thicker than 24 gauge. Thicker sheets are more rigid and suitable for structural or load-bearing components, while thinner sheets are easier to bend and shape for decorative or intricate work.
Always verify the specific millimeter or inch measurement provided in the product details to ensure it meets your project's structural requirements.
Sheet Dimensions and Coverage
The physical size of the sheet determines how much material you have to work with. Square sheets like the 6×6 inch options are versatile for small parts, while rectangular sheets like the 12×6 inch or 8×10 inch options provide more surface area for larger components.
Consider the size of your final piece and the amount of waste you expect from cutting to choose the appropriate sheet dimensions.
Material Composition and Workability
Most of these sheets are made from H62 brass, which contains approximately 62% copper. This alloy is known for its good machinability, corrosion resistance, and ease of brazing and welding. The protective film on both sides helps prevent scratches during storage and handling. When selecting a sheet, consider whether you plan to weld, solder, or mechanically fasten the material, as H62 brass is generally compatible with these processes.
Quantity and Project Scale
The number of sheets included in a package should align with the scale of your project. A pack of two is suitable for small, one-off projects, while packs of four or six are better for larger jobs or those requiring multiple iterations. If you are unsure of your exact needs, starting with a smaller quantity allows you to test the material's workability before committing to a larger purchase.
Frequently Asked Questions
What is the difference between 18 gauge and 24 gauge brass?
18 gauge brass is thicker, typically around 1mm, making it more rigid and suitable for structural applications. 24 gauge brass is thinner, around 0.5mm, making it easier to bend and shape for detailed or decorative work.
Is H62 brass suitable for welding?
Yes, H62 brass is generally suitable for brazing and welding. It has good plasticity in both hot and cold states, which facilitates these processes. Always follow proper safety and technique guidelines when working with metal.
Do the sheets come with protective film?
Most of the listed products include protective film on one or both sides of the sheet. This film helps prevent scratches and oxidation during storage and transport. You should remove the film before beginning your project.
Can I cut these brass sheets easily?
Yes, H62 brass is described as easy to cut. You can use standard metal cutting tools such as a hacksaw, shears, or a rotary tool. The flat cut of the sheets allows you to trim them to your desired size.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
