Are you trying to find brazing rod for copper among various brands on the market but aren’t sure where to begin? To assist you in finding the right one, we’ve put together a list of the 7 best to help you pick the perfect one!
We investigated and evaluated a number of the top-selling brazing rod for copper on the market in order to create our list of the best. Making a decision among the many options available is never simple. There are an infinite number of models available, each with a distinct price. And as you’ll find out, the best options aren’t usually the ones you imagine! This comparison is rich and relevant because of the numerous factors that were employed. You will find products featured in this ranking not only based on their pricing but also on their features and other customers reviews. To write this review, we completed 14 hours of research and did 65 brazing rod for copper tests. You won’t need to pick products at random any more. If you’re unsure of what to look for, browse our list and consult the buying guide!
An overview of our top picks
Table of contents
The best brazing rod for copper you can buy today
- Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%; Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results.
- Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!
- Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points.
- Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts.
- High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0620FMPOP brazing rods, with more affordable price!
- Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass brazing rod
- Standard: The Fox Alloy copper welding rods kit conforms to AWS A5.8
- Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps
- Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry，copper solder for jewelry copper phosphorus brazing rod
- Service: Fox Alloy Time-proven formulation; Advanced manufacturing facilities; A team of experienced welding engineers ready to answer all your welding questions.
- Composition: P: 7.3%, Copper: Remainder. Brazing temperature Range: 1350-1550°F (732-843°C).
- This solder alloy is commonly used for brazing and joining copper and brass components in various industries. It offers good flowability and is suitable for applications where the solder needs to fill small gaps or joints with precision.
- Before brazing, it is essential to thoroughly clean the brazing area and the surface of the brazing material, removing any grease, oxides, or other contaminants.
- These stick Phosphor Bronze Brazing Rods are specifically designed for brazing carbon steel, copper alloys, cast iron, malleable cast iron, stainless steel, and some nickel alloys in various industries such as motors, air-conditioners, meters, and refrigeration.
- AWS Classification: BCuP-2.Suitable for oxygen fuel gas welding
- Size:14’’ x1/8’’x1/20, Appropriate length, minimal waste .
- 【APPLICATION】Copper brazing rods are widely used for brazing copper and copper alloys in motors, copper water pipe and refrigeration industries. It can also be used DIY decorate. Note: Silver flux should be used when brazing copper alloys.
- 【ADVANTAGES】Brazing temperature range: 1310-1508°F. Our experiments show that the current batch of phosphorus copper brazing rods melts at 1425°F. And the welds have no leakage, no deformation and falling off, no cracking and flying slag, and obtain a good weld.
- 【MATERIAL】 20 Rods 1/13" X 13.78" copper brazing wire are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): remainder, Content of other elements: ≤0.15%. Note: Welding needs to be done in an open place or outdoors.
- 【PACKAGING】Cadhena copper solder is packaged in a PVC tube. Compared with other packages, it can effectively reduce the occurrence of moisture and other incidents and is more convenient to take out and use. Easy to use and perfect for both beginners and professionals. It will help you get the job done right.
- 【SERVICE】These welding rods are made from the finest materials and are designed to provide you with the best possible results. When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you.
- 【Quality Material】: The package includes 10 PCS 16”length flat copper brazing rods，BCuP-2 Phosphor Copper welding rod composition : Phosphor (P): 7%, Copper (Cu): the remainder .No flux required for soldering copper pipes. Flux must be added when copper and iron pipes are welded.
- 【Good Liquidity】: Welding rod Low metling point 640-770℃. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces.Phosphor Copper brazing rods have a lower melting point than other brazing rods.
- 【Application Widely】：The Copper welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.Also can braze some pipes,wire or the small copper braze job and the art project .
- 【Packaging】: GEOYLE welding rod packaging is packaged in a sealed tube, come in a fairly standard housing, with the rubber caps on the ends. can long-term storage,The rubber caps do not come off easily prevent sprinkle down of phosphor bronze welding rods.
- 【Service】: When you have a problem during the use of the electrode, please contact us immediately, we have professional welding engineers to solve the problem for you. Looking forward to your suggestions for welding rods, we will continue to improve our products and serve you better.
- MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder.
- ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces.
- PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use.
- APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry.
- SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better.
- 15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%; Phosphor (P): 4.8-5.2%; Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux.
- Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!
- Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006", Fluidity Rating: 3. The 15% silver contents greatly improve the performance of the brazing alloys, providing better wettability, higher strength and lower melting temperature. Consequently, making the welding fluids capable to flow deeply into the small brazing gap, providing higher strength and toughness of the welding joint, and reducing the brazing time.
- All-Purpose: A Must-Have for HVAC, Plumbing and Mechanical repairing.Perfect for both professionals and DIY. Ideal for brazing or filling of Copper to Copper, or Brass and Bronze joints with small to medium gaps, especially suitable for parts that requiring higher strength and vibrating resistances, such as air-conditioners, refrigerators and freezers, compressors, electrical motors, and etc.
- High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS STAY SILV 15 or SIL-FOS 15% silver brazing rods, with more affordable price!
- Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs
- Contains 12-Inch rods
- Tensile strength: 40,000 psi
- Working temp: 1,310-1,475-Degree farenheit
- Joins copper to copper without flux, or copper to copper alloys (brass, and bronze)
- 5% Silver Bearing: USA AWS A58 Class: BCuP-3 brazing alloys rods. Contents: Silver (Ag) 4.8-5.2%; Phosphor (P): 6.5-7.0%; Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux.
- Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!
- Best Performances: Solidus Temperature: 1189°F / 643°C, Liquidus Temperature: 1419°F / 771°C. Recommended Joint Clearance: 0.003"/0.006", Fluidity Rating: 3. The 5% silver contents greatly improve the performance of the brazing alloys, providing better wettability, higher strength and lower melting temperature. Consequently, making the welding fluids capable to flow deeply into the small brazing gap, providing higher strength and toughness of the welding joint, and reducing the brazing time.
- All-Purpose: A Must-Have for Plumbing, HVAC and Mechanical repairing. Perfect for both professionals and DIY. Ideal for gas welding of Copper to Copper, or Brass and Bronze joints with small gaps tie-in and filling ample clearance, especially suitable for vibrating parts that requiring higher strength and shock resistances, such as air-conditioners, refrigerators and freezers, compressors, electrical motors, and etc.
- High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS STAY SILV 5 or SIL-FOS 5% silver brazing rods, with more affordable price!
- Package Include: The package includes 20pcs welding rods, which is convenient to replace. Such economical and practical welding rod kit is commonly used for welding copper tubes of air conditioners and refrigerators
- Good Fluidity & Easily Use: Standard processing with 2mm diameter, the low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space
- Extensive Applications: Our round welding rod is suitable for electromechanical instrument industry. And it is mainly used for refrigerator copper tube, air conditioner copper tube welding, copper product welding
- Stable Working Performance: This round phosphor copper welding rod adopt phosphor copper material, has stable working performance and is widely used in various MIG welding equipment
- Regulatory Compliance: This welder rod is entitled with high performance according to strict rule. The rod is designed and manufactured according to international standard, strictly follow factory quality control
- 【Value Pack】 Each tube contains 9 pcs of bare solid bronze brazing alloy rods, each rod measures 1/8" in diameter and 14" in length. Total 1/2 lb or half pound valued pack. Great saving!
- 【Optimized Formula】0.01-0.4% Phorsphor, 7-9% Sn Tin, Rest for Copper. Low Fume substitite for the classic brass brazing alloys, LFB (bare low fuming bronze) is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Solidus Temperature: 1607°F / 875°C, Liquidus Temperature: 1877°F / 1025°C. Tensile strength：37700 PSI;
- 【All Purpose】Widely used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Perfectly Brazing for all copper and brass parts,such as water heater, radiant heater, cleaner,etc.
- 【General Applications】Perfect working for MAPP, MAP, propane and oxygen acetylene gas welding torch set-up. Also suitable for contact TIG welding, high frequency brazing and furnace brazing. It is an ideal choice for both professionals and DIYers.
- 【Better with Flux】 Bluefire JFB-102 or JFB-102S brazing flux is recommended when braze non-brass or bronze metal parts. The high quality flux will increase the brazing fluid's flowablity and improve the welding joint mechanics and strength. Check our store for the recommended flux.
- Solution temperature during heat treating must be below the solidus of the braze alloy in order to ensure integrity of the joint is maintained.
- Joining all brazable grades of aluminum and copper; Aluminum to Aluminum or Aluminum to Copper wire pigtail splices; Aluminum to Copper, Aluminum to Brass or plated terminals
- HVAC applications with Brass, Copper, Aluminum and Steel | Effective with any of these heat sources: Oxy-acetylene torch, Natural gas torch, MAPP Gas, Induction
- Quantity per pack: 5 | Rod length: 8 Inches | Shelf life: 2 Years at ambient temp. | Density (Lbs/in³): 0.19 | Recommended brazing temperature: 950-1000°F (510-537°C) | Liquidus: 905°F (471°C) | Solidus: 826°F (441°C) | Appearance: Silver-colored with white flux channel
- Supplying Demand replacement parts are compatible with Major Brands, but you should always verify compatibility with your specific application.
- [Material] The chemical composition of the brazing rods: Cu 58%~62%, Al 0.01%, Fe 0.2%, Mn 0.3%, Si 0.1%~0.5%, Sn 1%, Pb 0.03%, Zn balance. Note: Welding needs to be done in an open place or outdoors. Please wear a protective mask to avoid damage from zinc gas.
- [Portable to Carry and Store] These brass welding rod is packaged in a PVC tube, which will effectively reduce the occurrence of moisture and other incidents and is more convenient to take out and use. Easy to use and perfect for both beginners and professionals. It will help you get the job done right.
- [Easy for Welding] the brazing rod is an ideal material for you to do welding work, such as sculpture welding, model welding, circuit board welding and so on, whose melting point is 890℃/ 1634℉, serving as a nice helper for you
- [Appropriate Size for Processing] designed with a length of approx. 25 cm/ 9.84 inches and a diameter of approx. 1.6 mm/ 0.06 inches, the knife making handle pins are suitable for you to grip, store and carry around. You will get 30 pieces brazing rods, sufficient quantity can meet your daily use and replacement need, or share with friends.
- [Widely Used] Versatile and can be used for a variety of welding applications as well as DIY projects such as making whirligigs. Brass brazing rods is used for welding copper alloy, carbon steel and alloy steel. It can also be used as an inlaid carbide tool or DIY decorate. Note: Copper-zinc alloys are not suitable for argon arc welding.
- High strength alloy used for gas brazing low carbon and low alloy steels
- Used in applications require high tensile strength, greater than 45,000 psi
- High silicon and manganese content eliminates the need for flux
- Typical applications include low carbon and low alloy steels and sheets
- Fluxed coated Cadmium-free 45% Silver brazing rods. 1/16" Core (3 Sticks)
- For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum.
- For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron.
- Meets AWS A5.8 BAg-5, QQ-B-654A BAg-5.
- Made in USA. DFARS Compliant.
- VERSATILE CRAFTING MATERIAL: These brass brazing rods are suitable for a wide range of crafting and DIY projects, including knife handle making, model building, and home decoration. The smooth surface and sturdy construction make the brazing rods easy to work with and shape to your needs.
- PRODUCT SIZE: With 20 pieces of brass rods in each package, you’ll have plenty to work with for all your crafting needs. And at 9.85 inches in length and 2mm in diameter, they’re easy to store and transport.
- QUALITY & LONG-LASTING: Made from high-quality brass, these brazing rods for steel are built to last. They’re resistant to corrosion and won’t easily deform or rust, ensuring that your projects will stay looking great for years to come.
- EASY TO CUSTOMIZE: These brass rods for crafts are easy to cut and shape, allowing you to create custom-sized pieces for your projects. Whether you need a specific length for a knife handle or a special shape for a model, the brazing rod makes it easy to achieve the perfect fit.
- IDEAL FOR WELDING: With a melting point of 1650 degrees Fahrenheit, these welding rods are an excellent choice for welding work. Use them for sculpture welding, circuit board welding, or any other project that requires a strong and reliable bond.
- ALLOY COMPOSITION is 15% Silver, 5% Phosphorus and 80% Copper material. Pack includes 28 silver brazing rods suitable for copper to copper or brass to bronze joints
- BRAZING ROD SPECS are .12 x .05 x 20 in. Weight is 1lb. Melting temperature is 1190F. Flow, 1475F. Each 15 percent silver brazing rod is the equivalent of the American standard AWS BCuP - 5
- HIGH PERFORMANCE low temp phosphor 15 brazing rod set. Has a low melting point, good welding fluidity, can flow into small gaps and provide higher strength. Best alloy at filling gaps when close fit-ups cannot be made
- PERFECT, VERSATILE brass brazing rod set. Used for plumbing, for mechanical repairs, as an HVAC solder set, as a steel brazing rod set for electrical appliances, gas welding, plus more
- TOP QUALITY ALLOYS as all of our 15 silver solder rods are made with the highest quality assurance. For home or commercial jobs requiring copper brazing rods, ADD TO CART
- 7 pieces - 19.5" x 1/8" x .050"
- Harris does NOT measure this pkg by weight.
- However, it is approximately 4-5 ounces.
- Superior Performance - Works at much lower temperatures (728 °F/387°C) than most comparable brazing alloy products, allowing you to repair and fabricate more aluminum and other non-ferrous parts.
- Perfect Welding Results: strong weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent machinability.
- Scope of Application:Works with aluminum, aluminum alloy, steel and iron, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals. Allowing you to apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane torch like the best metalwork enthusiasts do.
- WARRANTY -- If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority.
- 【Value Pack】 Each tube contains 40 pcs of bare solid brass brazing alloy rods, each rod is 1/16" in diameter and 14" in length. Total 1/2 lb or half pound valued pack. Great saving!
- 【Easy Flow Brazing Alloy】 Optimized formula of 59-61% Copper, 0.8-1.2% Sn Tin, 0.15-0.35% Silicon, Rest for Zinc. Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane gas welding torch set up;
- 【All-Purpose Filler Metal】Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings. This brass alloy is suitable to braze brass, bronze, low carbon steel, cast iron, nickel alloys and hard alloys parts, High Joint Tensile Strength up to 37700 PSI;
- 【Perfect for Gas and TIG Welding】 Melting point is between 1634°F~1661°F (890℃~905℃). Recommended to best use under temperature 1724°F. Perfect working for MAPP, MAP, propane and oxygen acetylene gas welding equipments. A “must have” filler metal for every machine shops and DIYers;
- 【Better with Flux】 Bluefire JFB-102 or JFB-102S brazing flux is recommended when braze non-brass metal parts. The high quality flux will increase the brazing fluid's flowablity and improve the welding joint mechanics and strength. Check our store for the recommended flux.
How to choose a good brazing rod for copper
Does the idea of finding a fantastic brazing rod for copper make you anxious? When it comes to purchasing this product, specifically when deciding which model to select, has your head been spinning between options? You are not alone if that is the case. We are aware of the pressure involved in the purchasing process!
Your presence here indicates that you are interested in brazing rod for copper. Before choosing which product would be the best for your needs after being inundated with information, locate a reliable source with genuine selections. You can get that information from a variety of sources, including buying guides and rating websites, word-of-mouth recommendations from friends and family, online discussion forums where users can share their own experiences, product reviews that can be found all over the internet, and YouTube channels. You can only get the right product through exhaustive analysis. But you realize that’s not always simple. In order to ease your concerns, we have taken the time to develop a list of the top brazing rod for copper products available right now. You might be wondering how we came up with the list. How was this buying guide developed?
First, we used our algorithms to gather as much reliable data as we could about these products. To verify all the data gathered, we used both artificial intelligence and a lot of algorithms.
Then, our experts used criteria that are recognized in the business to evaluate them according to their quality to price ratio, allowing us to choose the top brazing rod for copper on the market right now!
The selection of the goods is not arbitrary. Before creating a list, we take into account a number of factors. Below are some of the criteria discussed:
Brand Value: What happens if you choose a dubious brand just because it appears to be a good deal? So the likelihood of receiving a product with a short shelf life increases. That is due to the fact that well-known brands have a reputation to uphold, while others do not. Top brazing rod for copper brands strive to provide some distinctive traits that set them apart from the competition. So, hopefully one or more of the items on our list will be perfect for you.
Features: Useful features are all you need, not tons of them. We consider the important aspects and select the top brazing rod for copper based on those.
Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products with higher specifications, but with the right balance.
Quality: A product’s quality may always be quantified with the aid of numbers. We look for goods with better standards that strike the proper balance. The best quality product that gets highly appreciated and recommended by experienced users.
Customer ratings: Would it be accurate to suggest that the brazing rod for copper were used by hundreds of customers before you? Superior ratings indicate that many customers had better service.
Customer Reviews: Like ratings, provide you with accurate and reliable information about the product from genuine customers. Customer ratings are very important to all of us because they contain accurate and reliable information about the customer service we received from several hundred customers.
Seller Rank: This is very intriguing! Not only do you need a good brazing rod for copper, you also need a product with rising sales that is trendy. It accomplishes two goals. First, the expanding user base proves the quality of the product. Second, given that number, producers must be able to offer greater quality and after-sales support.
Value: You get what you pay for, they say, so consider the value. Cheap isn’t always good and expensive isn’t always bad. However, that does not imply that spending a lot of money on a product that is flashy but underwhelming is a good idea. Before adding them to the list, we make an effort to evaluate how much value you can get for your money from your brazing rod for copper.
Durability: Durability and reliability are closely related concepts. You will benefit from a strong and long-lasting brazing rod for copper for months and years to come.
Product availability: Products come and go, and new ones replace the old ones. Most likely, a few new features and required changes were made. What use is it to use a supposedly good product if the maker no longer supports it? We make an effort to highlight products that are current and offered by one or more trustworthy sellers, if not more.
Negative Reviews: Yes, we do take that into account as well! The goods with the majority of bad reviews are filtered out and disregarded when we choose the best-rated one on the market.
These are the standards by which we selected our brazing rod for copper. Do we end our process there? Hell no. The most crucial fact about us that you should be aware of is that we regularly update our website with current and pertinent information. We have one more layer of filtration since we place the greatest importance on reader satisfaction. Please let us know if any product included here is incorrect, irrelevant, subpar, or simply out of date. We always value your opinions, and we’ll work hard to make any necessary corrections to our list in response to them.
Why should you believe us?
There are now thousands of possibilities for these products on Amazon, but choosing the best one can be difficult and time-consuming. And what brazing rod for copper should you purchase in 2022?
This guide is the result of more than 10 years of experience in researching, testing and writing about many topics. Each member of our team is an authority in their area. We read every article we could find online and every consumer review on every retail website for seven hours. Additionally, we discovered a ton of websites that offered helpful resources, including buying tips and thorough information on brazing rod for copper.
