Tools & Home Improvement

Center Drill Inserts: 8 Options for 2026

This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.

Product details come from Amazon listings. Compare the specifications that matter to you, and check the current price and availability on Amazon before buying. How we compare

Selecting the right center drill insert depends on your measurement system, the material you are drilling, and the durability required. Center drills create the initial pilot hole and countersink for larger bits, ensuring accuracy in lathe and milling operations. The primary differences among these 8 options lie in the steel grade, coating, and size range.

For general workshop use, standard M2 or HSS sets in metric or imperial sizes provide a versatile starting point. If you frequently drill into stainless steel or hardened alloys, cobalt steel with coatings offers better wear resistance. Bulk packs of a single size are also available for production settings where one size is used repeatedly.

AT A GLANCE

Our 3 picks for different needs

Accusize Center Drill Set, #1-#5, 3/64'-3/16', 5-Pc, M42 Cobalt, 0556-5500
04Imperial Cobalt Steel

Accusize 5-Piece M42 Center Drill Set

The Accusize M42 set features 8% cobalt steel in imperial sizes, providing the heat resistance specified in the product details.

Read the details
toolant Center Drill Bit Set, TiAlN Coated Cobalt M35 HSS Centering Drill Bit for Stainless Steel...
06Coated Hard Metal Drilling

toolant 6-Piece TiAlN Coated M35 Set

The toolant TiAlN coated M35 bits are listed for use on stainless and hardened steel, with imperial sizing.

Read the details
8PCS Center Drill Bits Set Countersink Tools 60 Degree Angle HSS 1-6.0 | Center Drill Bits for Lathe...
03Extended Metric Range

SeonFook 8-Piece HSS Center Drill Set

The SeonFook 8-piece set includes sizes up to 6.0 mm, extending the range beyond the 5.0 mm limit of other sets.

Read the details

All products, in detail

7 Pieces Center Drill Bits Set, M2 High Speed Steel 60-Degree Angle Center Drill Bits Kit...
01

7-Piece M2 HSS Center Drill Set

This 7-piece set features M2 high-speed steel bits with a 60-degree angle, suitable for drilling center holes in steel, iron, aluminum, and brass. The sizes range from 1.0 to 5.0 mm, covering common small-diameter workpieces. It includes a portable storage case for organization. This kit is a standard choice for general metalworking tasks where M2 steel provides adequate durability for materials up to 200HB.

  • M2 High Speed Steel construction
  • Sizes 1.0 to 5.0 mm
Xinodle 7 Pcs Center Drill Bit Sets - M2 High Speed Steel Center Drill Bits
02

Xinodle 7-Piece M2 Center Drill Set

The Xinodle set offers 7 pieces of M2 high-speed steel center drills with a 60-degree tip angle. It is designed for use with lathe machines and power drills on materials like carbon steel, cast iron, and aluminum. The single-fluted design aids in chip removal. This option is suitable for users needing a standard metric set for general centering and countersinking tasks in a workshop environment.

  • M2 High Speed Steel material
  • Single-fluted design for chip removal
8PCS Center Drill Bits Set Countersink Tools 60 Degree Angle HSS 1-6.0 | Center Drill Bits for Lathe...
03Extended Metric Range

SeonFook 8-Piece HSS Center Drill Set

This set includes 8 pieces of HSS center drills, extending the size range to 6.0 mm. The bits feature sandblasting passivation surface treatment and a fully ground body for accuracy. The 60-degree tip angle is compatible with standard centers. It is applicable for drilling in stainless steel, hardened steel, and cast iron.

This larger set is useful for shops that need to handle slightly larger workpieces than the standard 5.0 mm limit.

  • 8 pieces including 6.0 mm size
  • Sandblasting passivation surface treatment
Accusize Center Drill Set, #1-#5, 3/64'-3/16', 5-Pc, M42 Cobalt, 0556-5500
04Imperial Cobalt Steel

Accusize 5-Piece M42 Center Drill Set

Accusize provides a 5-piece set of M42 HSS center drills, which contain 8% cobalt for superior heat resistance. The set uses imperial sizing from No. 1 to No. 5. These bits are ground from solid stock with a single flute. They are ideal for centering work ends on machine centers.

This option is best for users working in imperial measurements who require the added durability of cobalt steel.

  • M42 HSS with 8% Cobalt
  • Imperial sizes No. 1 to No. 5
Center Drill Bits Set - 7 Pcs 60-Degree Angle High Speed Steel Center Drill
05

Aleric 7-Piece HSS Center Drill Set

The Aleric set consists of 7 high-speed steel center drills with a 60-degree angle. It is designed for drilling in mold steel, cast iron, aluminum, and wood. The bits are solid and designed to enhance wear resistance. This set comes with a storage case and is suitable for general metalworking applications.

It offers a standard metric range for users who need reliable centering tools for various materials.

  • High Speed Steel construction
  • Sizes 1.0 to 5.0 mm
toolant Center Drill Bit Set, TiAlN Coated Cobalt M35 HSS Centering Drill Bit for Stainless Steel...
06Coated Hard Metal Drilling

toolant 6-Piece TiAlN Coated M35 Set

This toolant set features M35 cobalt HSS bits with TiAlN coating, making them harder and more wear-resistant. It includes 6 bits in imperial sizes, with two No. 1 bits. The 118-degree split point helps prevent walking. This set is specifically marketed for stainless steel, hardened steel, and other hard metals.

It is a strong choice for users drilling into tough materials who need the added durability of coated cobalt steel.

  • M35 Cobalt HSS with TiAlN Coating
  • 118-degree split point
Accusize #3 HSS Center Drill, 0530-0300x10
07

Accusize No. 3 HSS Center Drill 10-Pack

This is a 10-piece pack of single-size No. 3 HSS center drills. Each bit has a 1/4-inch body diameter and a 7/64-inch drill diameter. The standard 60-degree included angle ensures compatibility with machine centers. This bulk option is ideal for production environments or shops that consume a high volume of a single size.

It provides a cost-effective way to stock a specific size without buying a full set.

  • 10 pieces of No. 3 size
  • 1/4-inch body diameter
toolant Center Drill Bit Set, TiAlN Coated Cobalt M35 HSS Centering Drill Bit for Stainless Steel...
08

toolant 6-Piece TiAlN Coated M35 Metric Set

This metric version of the toolant set includes 6 pieces of M35 cobalt HSS bits with TiAlN coating. The sizes range from 1.0 mm to 5.0 mm, with two 1.0 mm bits included. The 120-degree split point aids in precise drilling. It is designed for use on stainless steel, carbon steel, and cast iron.

This set is suitable for metric users who need the enhanced durability of coated cobalt steel for hard materials.

  • M35 Cobalt HSS with TiAlN Coating
  • Metric sizes 1.0 to 5.0 mm

Head-to-Head Comparisons

Standard 7-Piece vs Extended 8-Piece Metric Sets

The 7-piece M2 set and the SeonFook 8-piece HSS set both cover the 1.0 to 5.0 mm range, but the SeonFook set adds a 6.0 mm bit. This extra size allows for centering on slightly larger workpieces without needing a separate tool. The 7-piece set uses M2 steel, while the SeonFook set specifies HSS with sandblasting passivation.

If your work rarely exceeds 5.0 mm, the 7-piece set is sufficient. However, if you need to handle 6.0 mm centers, the SeonFook set provides that capability in a single kit.

Accusize M42 vs toolant M35 Coated Sets

Both sets use cobalt steel, but the Accusize M42 contains 8% cobalt, while the toolant M35 contains 5% cobalt with a TiAlN coating. The Accusize set is uncoated, relying on the cobalt content for heat resistance. The toolant set adds a coating for increased hardness and wear resistance, which is beneficial for drilling stainless steel.

The Accusize set uses imperial sizes No. 1 to No. 5, while the toolant set offers imperial sizes with a 118-degree split point. Choose Accusize for standard cobalt performance, or toolant for coated durability on hard metals.

Bulk Single Size vs Multi-Size Set

The Accusize No. 3 10-pack provides ten identical bits, while the Accusize 5-piece set offers five different sizes. The bulk pack is ideal for production lines or shops that use No. 3 drills frequently and need a large stock of one size. The multi-size set is better for general workshop use where various workpiece diameters are encountered.

If you only need one size, the 10-pack is a practical option. If you need versatility, the 5-piece set covers a range of common centering needs.

Buying Guide

Choose Between Metric and Imperial Sizes

The first decision is whether you work in metric or imperial measurements. Several sets, such as the Xinodle and Aleric options, are available in metric sizes from 1.0 to 5.0 mm. The Accusize and toolant sets offer imperial sizes, such as No. 1 to No. 5 or 3/64 to 3/16 inch.

Select the system that matches your shop's standards to avoid conversion errors. Mixing systems can lead to incorrect centering and wasted material.

Select Steel Grade for Material Hardness

The steel grade determines how well the drill performs on different materials. M2 and standard HSS are suitable for mild steel, aluminum, and brass. M35 and M42 cobalt steels offer better heat resistance and are better for harder materials like stainless steel. If you are drilling into hardened steel or stainless, consider the toolant M35 or Accusize M42 sets.

For general use, M2 or HSS sets are adequate and often more accessible.

Consider Coatings for Wear Resistance

Coatings can extend the life of center drills, especially when drilling abrasive or hard materials. The toolant sets feature TiAlN coating, which increases hardness and reduces friction. Uncoated sets, like the Accusize M42, rely on the base steel's properties. If you are drilling into stainless steel or hardened alloys, a coated bit may last longer.

For softer materials, uncoated bits are often sufficient and easier to maintain.

Match Set Size to Your Workpiece Range

Most sets cover the 1.0 to 5.0 mm or No. 1 to No. 5 range. The SeonFook set extends to 6.0 mm, which is useful for larger workpieces. If your work is limited to small diameters, a standard 5 or 7-piece set is sufficient. If you need to center on larger parts, look for a set that includes larger sizes.

Bulk packs of a single size are also an option if you only need one specific size for production work.

Frequently Asked Questions

What is the difference between M2 and M42 steel?

M2 is a standard high-speed steel, while M42 is a cobalt high-speed steel containing 8% cobalt. M42 offers better heat resistance and wear durability, making it suitable for harder materials. M2 is adequate for general metalworking tasks on softer materials.

Can I use these center drills in a drill press?

Yes, most of these center drills are designed to work with lathe machines and power drills, including drill presses. Ensure the shank size of the drill fits your drill press chuck. The 60-degree angle is standard for centering work.

Do I need a coating for drilling stainless steel?

A coating like TiAlN can improve performance on stainless steel by reducing friction and increasing hardness. However, uncoated cobalt steel can also be used. The toolant sets with TiAlN coating are specifically marketed for stainless and hardened steel.

What does the 60-degree angle mean?

The 60-degree included angle is the standard angle for center drills, ensuring compatibility with machine centers and standard countersinks. It allows the drill to create a precise center hole for further drilling or turning operations.

Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API

Was this article helpful?

Thanks for your feedback!

Thanks — we'll work to improve this article.

Kylan Shields

Kylan Shields

Kylan Shields is the editorial byline of Tossions. Comparisons published under this name are compiled from Amazon listing data (specifications, customer ratings and availability), not from hands-on testing.