Selecting the right commercial access smart card depends heavily on the frequency and chip type supported by your existing infrastructure. The eight options listed here range from standard 125kHz proximity cards to 13.56MHz Mifare cards and contact IC chips. Each product serves a specific technical requirement, from simple door entry to complex data storage.
Before purchasing, verify that your reader or lock system matches the card's operating frequency and protocol. Mismatched frequencies, such as using a 13.56MHz card with a 125kHz reader, will prevent the card from functioning. This guide helps you match the card specifications to your system's needs.
Quick picks for different needs
Getmorv 100-Pack 125kHz RFID Key Fobs
The 100-pack of 125kHz key fobs is ideal for users needing portable, read-only tokens with engraved unique IDs.
Read the detailsAll products, in detail
Gialer 100-Pack 125kHz TK4100 Proximity Cards
These standard credit-card-sized PVC cards feature a read-only TK4100 chip operating at 125kHz. They are pre-printed with ABA and Wiegand codes, making them suitable for access control, time attendance, and hotel key systems. The cards include a protective film for scratch resistance and are waterproof.
This 100-pack is ideal for buyers needing a bulk supply of standard proximity cards that are printable on both sides.
- Features a read-only TK4100 chip with a 5-12mm reader distance.
- Standard CR80 size PVC cards are pre-printed with ABA and Wiegand codes.
MktStleat 100-Pack 26-Bit Clamshell Proximity Cards
Designed for commercial access, these 26-bit proximity cards operate at 125kHz and are compatible with major ISOProx reader formats. The clamshell design offers a distinct form factor compared to standard flat cards. They are suitable for elevators, parking lots, and time and attendance systems. The package includes a protective card holder to keep credentials organized and clean between uses, adding a practical storage solution for facility managers.
- 26-bit format cards compatible with ISOProx 1386, 1326, and H10301 formats.
- Includes a protective card holder for storage and organization.
XCRFID 10-Pack AT24C64 Contact IC Cards
These blank contact IC cards use the AT24C64 chip with 64K EEPROM memory, organized as 8192 words of 8 bits. They follow the ISO 7816 standard and require a contact card reader/writer for data manipulation. The cards are made of PVC and are not compatible with inkjet printers.
This 10-pack is intended for users with professional knowledge of reading and writing contact chips, suitable for applications requiring specific serial EEPROM storage.
- AT24C64 chip provides 65,536 bits of serial EEPROM memory.
- ISO 7816 standard contact cards require a compatible reader/writer.
Getmorv 100-Pack 125kHz RFID Key Fobs
These black ABS key fobs operate at 125kHz and are read-only, meaning they cannot be reprogrammed with a card writer. Each fob is pre-programmed with a unique 10-digit ID number engraved on the casing. They are compatible with universal 125kHz tags like EM4100 but not with encrypted systems or 13.56MHz devices.
This 100-pack is ideal for adding new keys to compatible RFID door locks or for ID management in access control systems.
- Read-only 125kHz fobs with unique 10-digit engraved IDs.
- ABS plastic casing in black, compatible with EM4100/4102 tags.
HWMATE 100-Pack 125kHz Proximity ID Cards
These 125kHz proximity cards are 0.8mm thick and waterproof, with a reading distance of 5-12mm. Each card is pre-programmed with a unique 18-digit ID number and is read-only, not rewritable. They are suitable for access control and time attendance systems. The standard card size and durable construction make them a straightforward option for facilities needing a large quantity of basic proximity credentials.
- Pre-programmed with unique 18-digit ID numbers.
- Waterproof 0.8mm thick cards with 5-12mm reading distance.
OBO HANDS 100-Pack 13.56MHz Mifare S50 Cards
These Mifare Classic 1K cards operate at 13.56MHz and follow the ISO14443A standard. They are 0.8mm thin, made of white PVC, and described as good for printing. The reading distance is 1-10cm, with sensitivity dependent on the reader quality. These cards are read-only in this listing context and are suitable for access control systems that utilize Mifare technology.
The 100-pack offers a standard supply for facilities using 13.56MHz infrastructure.
- Mifare Classic 1K cards operating at 13.56MHz.
- 0.8mm thin white PVC cards with 1-10cm reading distance.
200-Pack EM4100 Read-Only Proximity Cards
This bulk 200-pack of EM4100 cards operates at 125kHz and is designed for non-encrypted standard ID door readers. The cards are made from PVC and ABS, are waterproof, and can operate in temperatures from -40°F to 185°F. They follow the ISO 18000-2 protocol and are not compatible with encrypted systems like HID or Indala.
This large quantity is suitable for businesses, schools, or apartments needing a significant stock of standard access cards.
- EM4100 chip cards are compatible with non-encrypted 125kHz readers only.
- Waterproof PVC/ABS construction supports operation from -40°F to 185°F.
100-Pack 13.56MHz Mifare Classic 1K Cards
These 13.56MHz RFID cards feature 1KB of memory and are compliant with the ISO14443A protocol. They are compatible with major readers like RC522 and PN532, as well as locks from KABA, SAFLOK, and MIWA. The cards include a permanent 4-byte UID and support password-based read/write permissions.
They are printable with thermal transfer printers but not inkjet, making them suitable for hotels and offices requiring higher-capacity data storage.
- 13.56MHz frequency with 1KB memory and ISO14443A compliance.
- Compatible with thermal transfer printers and major hotel lock systems.
Head-to-Head Comparisons
Gialer TK4100 vs EM4100: 125kHz Card Comparison
Both the Gialer and the 200-pack EM4100 cards operate at 125kHz and are read-only. The Gialer cards are pre-printed with ABA and Wiegand codes and are printable on both sides, making them suitable for ID badges. The EM4100 cards are made from PVC and ABS, are waterproof, and have a wider temperature operating range.
If you need printable cards for identification, the Gialer option is more suitable. If you need a durable, bulk supply for basic access control, the EM4100 pack offers a larger quantity and specific temperature resistance.
Mifare 1K vs Mifare S50: 13.56MHz Options
Both products are 13.56MHz Mifare cards compliant with ISO14443A. The 100Pcs Smart Intelligent RFID Cards cards explicitly list compatibility with major hotel locks like KABA and SAFLOK and include a permanent 4-byte UID. They are also compatible with thermal transfer printers. The OBO HANDS 100pcs/Lot RFID Card 13.56Mhz cards are described as good for printing and have a reading distance of 1-10cm.
The 100Pcs Smart Intelligent RFID Cards offers more detailed compatibility information for specific lock brands, while the OBO HANDS 100pcs/Lot RFID Card 13.56Mhz provides a standard Mifare S50 option. Buyers should check their specific lock model compatibility.
Contact IC vs Contactless Fob: Different Technologies
The XCRFID AT24C64 cards are contact IC cards requiring physical insertion into a reader, while the Getmorv fobs are contactless 125kHz tokens. The contact cards have 64K EEPROM memory and require professional knowledge to read and write. The contactless fobs are read-only, pre-programmed with unique IDs, and do not require physical contact.
The contact cards are suitable for applications needing specific serial EEPROM storage and professional handling. The contactless fobs are better for standard door access where convenience and non-contact operation are preferred.
Buying Guide
Match Frequency to Your Reader
The most critical factor is ensuring the card's frequency matches your reader. Most listed cards are either 125kHz or 13.56MHz. A 125kHz card will not work with a 13.56MHz reader, and vice versa. Check your existing system specifications before ordering. If you are unsure, consult your technician or refer to the Commercial Access Smart Card Readers guide to identify your reader's capabilities.
Understand Chip Compatibility
Different chips have different protocols. EM4100 and TK4100 are common 125kHz chips, while Mifare Classic 1K is a 13.56MHz chip. Some systems are encrypted and will not accept standard non-encrypted cards. Verify that your system supports the specific chip type listed. For example, HID and Indala systems are encrypted and may not work with standard EM4100 cards.
Consider Printing and Customization
If you need to print logos or names on the cards, check the printing compatibility. Some cards are compatible with thermal transfer printers, while others are not suitable for inkjet. The Gialer cards are printable on both sides, while the Mifare cards are compatible with thermal transfer printers.
Ensure the card surface and material support your intended printing method to avoid damage or illegible results.
Check for Wiegand and ABA Codes
Some access control systems require specific data formats like Wiegand or ABA codes. The Gialer cards are pre-printed with these codes, which can simplify setup for compatible systems. Other cards may require programming or may not include these codes. If your system relies on Wiegand output, ensure the card supports it.
Refer to Commercial Access Wiegand Card Readers for more information on Wiegand-based systems.
Frequently Asked Questions
Can I reprogram these cards?
Most of the listed cards are read-only and cannot be reprogrammed. The XCRFID contact cards are blank and require a reader/writer to add data. The 13.56MHz Mifare cards support read/write permissions but may require specific tools. Check the specific product details for reprogrammability.
Are these cards waterproof?
Several of the listed cards, including the Gialer, EM4100, and HWMATE options, are described as waterproof. This makes them suitable for outdoor or high-moisture environments. However, always check the specific product description for waterproofing claims, as not all cards in this list are explicitly stated to be waterproof.
What is the difference between 125kHz and 13.56MHz?
125kHz cards typically use lower-frequency proximity technology and are common in basic access control. 13.56MHz cards, like Mifare, offer higher data capacity and are often used in more advanced systems like hotel locks. The frequency must match your reader; they are not interchangeable.
Do I need a special reader for these cards?
Yes, you need a reader that matches the card's frequency and protocol. 125kHz cards require 125kHz readers, and 13.56MHz cards require 13.56MHz readers. Contact IC cards require a contact reader. Ensure your existing infrastructure supports the specific card type you are purchasing.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-20 / Affiliate links / Images from Amazon Product Advertising API
