Industrial & Scientific

Compression Cap Fittings: 7 Brass Options Compared for 2026

This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.

Product details come from Amazon listings. Compare the specifications that matter to you, and check the current price and availability on Amazon before buying. How we compare

Selecting the correct compression cap fitting requires matching the thread type and size to your specific pipe or valve. Many buyers confuse compression fittings with NPT threads, which can lead to leaks or installation failure. This comparison examines seven brass options to help you identify the right seal for your project.

The products listed here range from single-size compression caps for sink valves to multi-size flare cap assortments for gas lines. By understanding the distinction between compression, flare, and NPT connections, you can ensure a secure and durable fit for your plumbing or industrial needs.

Our pick: Brass 3/8'' Compression Valve Cap (10-Pack). This 10-pack of 3/8-inch compression caps with washers is specifically suited for angle stop valves and supply lines.

AT A GLANCE

Our 3 picks for different needs

(Pack of 10) Brass 3/8'' Compression valve Cap Fitting for Sink Shut off Angle Stop Water Line Valve...
013/8-inch Sink Valve Repair

Brass 3/8'' Compression Valve Cap (10-Pack)

This 10-pack of 3/8-inch compression caps with washers is specifically suited for angle stop valves and supply lines.

Read the details
Gisafai 6 Pcs Brass Pipe Caps Compression Cap Stop Valve Sae 45 Degree & Gas Line Flared Tube...
02Multi-Size Gas Line Capping

Gisafai 6-Piece Flare Cap Assortment

The Gisafai assortment covers six different flare sizes, allowing users to close off various gas and fuel pipe ends.

Read the details
6pcs Brass Pipe Cap, Actual Size: 13mm ID x 17mm OD x 9mm H
031/4-inch NPT Threaded Sealing

1/4" NPT Hex Head Pipe Cap (6-Pack)

These hex head caps with rubber gaskets are designed for 1/4-inch NPT threaded connections in irrigation and plumbing.

Read the details

All products, in detail

(Pack of 10) Brass 3/8'' Compression valve Cap Fitting for Sink Shut off Angle Stop Water Line Valve...
013/8-inch Sink Valve Repair

Brass 3/8'' Compression Valve Cap (10-Pack)

This ten-pack of 3/8-inch brass compression caps includes matching sealing washers for sink shut-off valves. The listing explicitly distinguishes these as compression fittings rather than NPT threads, making them suitable for angle stops and supply lines. The brass construction is noted for durability, and the included gaskets are designed to provide a secure, leak-proof fit for plumbing repairs under kitchen sinks or for washing machines.

  • Includes 10 brass caps and 10 sealing washers
  • Fits 3/8-inch compression supply lines, not NPT threads
Gisafai 6 Pcs Brass Pipe Caps Compression Cap Stop Valve Sae 45 Degree & Gas Line Flared Tube...
02Multi-Size Gas Line Capping

Gisafai 6-Piece Flare Cap Assortment

The Gisafai set provides six brass pipe caps in varying sizes from 1/4 inch to 3/4 inch, designed for SAE 45-degree flared tube connections. This assortment is ideal for gas line applications, including fuel, oil, and propane pipes. The caps are made from sturdy brass with high strength and corrosion resistance, allowing users to close off different pipe ends with a single wrench-tightened connection for both indoor and outdoor use.

  • Includes six sizes: 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4"
  • Designed for SAE 45-degree flared gas and fuel lines
6pcs Brass Pipe Cap, Actual Size: 13mm ID x 17mm OD x 9mm H
031/4-inch NPT Threaded Sealing

1/4" NPT Hex Head Pipe Cap (6-Pack)

These six brass end caps feature a hex head design and internal 1/4-inch NPT threads, distinct from compression fittings. Each cap includes a rubber gasket to ensure a tight seal for air, water, or gas lines. The specific dimensions are 13mm inner diameter, 17mm outer diameter, and 9mm height.

They are frequently used in irrigation, sprinkler systems, and plumbing fixtures where a threaded connection is required to close off a pipe end.

  • Fits 1/4-inch NPT male threads with a hex head
  • Includes rubber gaskets for leak prevention
Breezliy 12PCS 3/8-Inch Brass Compression Cap Stop Valve Cap,Brass Compression Fitting
04

Breezliy 3/8" Compression Cap (12-Pack)

This twelve-pack of Breezliy brass compression caps is designed for 3/8-inch OD tube connections. The heavy-duty brass material offers corrosion resistance and high-temperature ductility, with an operating range from -65 to +250 degrees Fahrenheit. These stop valve caps are used to connect lines for air, water, fuel, oil, and inert gases, providing a quick and simple way to seal off tubing ends in various industrial and domestic applications.

  • Fits 3/8-inch OD tubing
  • Operating temperature range of -65 to +250 degrees F
(Pack of 15) Brass 1/4'' Compression valve Cap Fitting for Sink Shut off Angle Stop Water Line Valve...
05

Brass 1/4'' Compression Valve Cap (15-Pack)

This fifteen-pack of 1/4-inch brass compression caps includes sealing washers for sink shut-off angle stop valves. The listing emphasizes that these are compression fittings, not NPT threads, which is critical for buyers verifying their valve type. They are versatile for plumbing repairs, toilets, faucets, and under-sink valves.

The brass material is chosen for long-lasting performance, and the design aims for a secure, leak-proof fit during installation.

  • Includes 15 brass caps and 15 sealing washers
  • Fits 1/4-inch compression supply lines, not NPT threads

Breezliy 1/4" Compression Cap (12-Pack)

Similar to its 3/8-inch counterpart, this twelve-pack of Breezliy caps fits 1/4-inch OD tubing. The solid brass construction is described as strong and stable, with low permeability and high-temperature ductility. These compression stop valve caps are suitable for sealing lines carrying air, water, fuel, oil, or inert gases.

The consistent material properties across the Breezliy line ensure reliable performance for quick and simple line connections.

  • Fits 1/4-inch OD tubing
  • Operating temperature range of -65 to +250 degrees F

uxcell 1/4" NPT Compression Cap (2-Pack)

The uxcell two-pack features brass pipe caps with 1/4-inch NPT internal threads, designed to close the end of pipes or fittings. Made from solid brass with a smooth, bright surface, these caps offer corrosion resistance and high hardness. They are widely used for sealing pipes in fuel, oil, air, and gas lines, as well as in appliances like air conditioners and water heaters.

The listing advises checking thread size carefully and avoiding over-tightening to prevent damage.

  • Features 1/4-inch NPT internal threads
  • Solid brass construction with high hardness

Head-to-Head Comparisons

Compression vs. NPT: 3/8'' and 1/4'' Cap Types

The 3/8-inch brass compression cap and the 1/4-inch NPT hex head cap serve different connection methods. The compression cap is designed for 3/8-inch compression supply lines, such as those found on sink shut-off valves, and includes a rubber washer for sealing. In contrast, the NPT cap features internal threads and a hex head, fitting 1/4-inch NPT male threads.

If your valve has a compression nut, the compression cap is the correct choice; if you are capping a threaded pipe end, the NPT cap is required. Buyers must verify their existing hardware to avoid purchasing the wrong thread type.

Breezliy 3/8'' vs. 1/4'' Compression Caps

Both Breezliy options are twelve-packs of heavy-duty brass compression caps with identical material properties and temperature ranges. The primary difference is the tube size: the first fits 3/8-inch OD tubing, while the second fits 1/4-inch OD tubing. Since the material and operating specifications are the same, the decision depends entirely on the diameter of the tubing you need to seal.

If you are working with standard 1/4-inch supply lines, the 1/4-inch cap is the appropriate selection. For larger 3/8-inch lines, the 3/8-inch cap provides the necessary fit.

Flare Assortment vs. Single NPT Cap

The Gisafai six-piece set offers a range of flare cap sizes from 1/4 inch to 3/4 inch, ideal for users who need to close off various gas or fuel line diameters. The uxcell two-pack, however, is limited to 1/4-inch NPT internal threads. If your project involves multiple pipe sizes or flared connections, the Gisafai assortment provides greater versatility.

If you only need to cap a specific 1/4-inch threaded pipe end, the uxcell cap is a targeted solution. The choice hinges on whether you need a multi-size kit for flare connections or a specific threaded cap for a single application.

Buying Guide

Identify Your Thread Type

Before purchasing, determine if your pipe or valve uses compression, flare, or NPT threads. Compression fittings use a nut and ferrule to grip the tube, while NPT fittings use tapered threads. Flare fittings use a 45-degree angle to seal. Misidentifying the type is the most common cause of installation failure.

Check the existing hardware or measure the connection to ensure the cap matches the required interface.

Measure the Pipe Diameter

Compression and flare caps are sized by the outer diameter (OD) of the tube, whereas NPT caps are sized by the thread size. For compression and flare fittings, measure the OD of your pipe to select the correct cap size. For NPT fittings, identify the thread size, such as 1/4 inch.

Accurate measurement prevents buying a cap that is too loose or too tight, ensuring a secure seal without damaging the pipe.

Consider the Application Environment

Brass is a common material for these fittings due to its corrosion resistance and strength. However, consider the medium being sealed. Some caps are designed for water, while others are specified for gas, fuel, or oil. Check the product description to ensure the cap is suitable for your specific fluid.

For example, flare caps are often used for gas lines, while compression caps are common for water supply lines.

Check for Included Sealing Components

Many compression and NPT caps include rubber washers or gaskets to enhance the seal. Verify if these components are included in the package, as they are often essential for preventing leaks. If the cap does not include a gasket, you may need to purchase one separately.

Ensuring you have the correct sealing component is as important as selecting the right cap size and thread type.

Frequently Asked Questions

Can I use a compression cap on an NPT thread?

No, compression caps and NPT caps are not interchangeable. Compression caps grip the tube with a ferrule, while NPT caps screw onto tapered threads. Using the wrong type will result in a poor fit and likely leaks. Always verify the thread type of your pipe or valve before purchasing.

What is the difference between flare and compression fittings?

Flare fittings use a 45-degree angle on the tube end to seal against the cap, while compression fittings use a nut and ferrule to compress the tube. Flare fittings are common in gas and fuel lines, whereas compression fittings are typical for water supply lines.

The connection method determines which cap you need.

Are brass caps suitable for high-pressure applications?

Brass is a strong and durable material often used in high-pressure plumbing and gas lines. However, the specific pressure rating depends on the fitting design and the pipe material. Check the product specifications to ensure the cap is rated for the pressure of your system.

Do I need a special tool to install these caps?

Most of these caps can be installed with a standard wrench. Compression caps require tightening the nut, while NPT and flare caps are screwed onto the pipe. Ensure you have the appropriate wrench size for the cap's hex head or nut to achieve a secure fit without over-tightening.

Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API

Was this article helpful?

Thanks for your feedback!

Thanks — we'll work to improve this article.

Kylan Shields

Kylan Shields

Kylan Shields is the editorial byline of Tossions. Comparisons published under this name are compiled from Amazon listing data (specifications, customer ratings and availability), not from hands-on testing.