Selecting the right current clamp depends on whether you need a standalone meter or a probe for an existing instrument. The eight options here range from slim standalone clamp meters to compact probes for multimeters and oscilloscopes. Each serves a different testing workflow, from residential maintenance to power electronics analysis.
Key considerations include jaw size for tight spaces, safety ratings for your environment, and output compatibility with your specific meter. Whether you need to measure high amperage in a panel or observe waveforms on a scope, these tools offer distinct capabilities for electrical troubleshooting.
Our 3 picks for different needs
Fluke 301D/ESP 600A AC/DC Clamp Meter
The Fluke 301D/ESP features a slim 10 mm jaw arm and standalone voltage/resistance functions, making it suitable for tight spaces where a multimeter cannot fit.
Read the details
Hantek CC-65 AC/DC Current Clamp for Oscilloscope
The Hantek CC-65 connects via BNC to oscilloscopes, allowing users to observe current waveforms with a 20 kHz bandwidth for power electronics analysis.
Read the details
ZCZQC SCT-013 0-100A Split-Core Current Transformer
The ZCZQC SCT-013 uses a split-core design that opens and closes, allowing installation around conductors without disconnecting the circuit.
Read the detailsAll products, in detail
ZIBOO i600E 600A AC Current Clamp
The ZIBOO i600E is a compact AC current clamp designed to work with most digital multimeters or mV AC measurement tools. It features a 1 mV/A AC output, which allows for easy current readings on compatible meters. The device carries a CAT III 600 V safety rating and is specifically noted in its title as a replacement for the Fluke i400.
Its compact shape is intended to offer utility in tight spaces while allowing users to take current readings without breaking the circuit.
- 1 mV/A AC output for multimeter compatibility
- CAT III 600 V safety rating
Fluke 301D/ESP 600A AC/DC Clamp Meter
The Fluke 301D/ESP is a standalone clamp meter with a slim body and a thin 10 mm jaw arm, designed to fit into tight spaces. It measures AC current up to 600 A and includes essential functions such as voltage, resistance, continuity, and capacitance. The device carries a CAT III 300 V safety rating, suitable for common residential and commercial settings.
It comes with a one-year manufacturer warranty and is positioned for everyday electrical maintenance and troubleshooting.
- Slim 10 mm jaw arm for tight spaces
- Measures AC current up to 600 A
Fluke I200 Small AC Current Clamp
The Fluke I200 is a small-sized AC current clamp that acts as a companion to digital multimeters. It measures up to 200 A AC and provides a 1 mA per amp output, ensuring easy readings on the meter. The clamp has a maximum conductor diameter of 20 mm and carries a CAT III 600 V safety rating.
It is designed for users who need to take accurate current readings without breaking the circuit, offering a compact form factor for standard multimeter use.
- 1 mA per amp output for multimeter compatibility
- Maximum conductor diameter of 20 mm
TECPEL CA-60 AC/DC Current Clamp Transmitter
The TECPEL CA-60 is an AC/DC current clamp transmitter probe with a measuring range of 0 to 60 A. It features a 9 mm clamp caliber and offers signal outputs of 1 mV/10 mA or 1 mV/100 mA DC. The device has an AC accuracy of ±2.0% (40-2 kHz) and ±4.0% (2-10 kHz), with a frequency response up to 20 kHz.
It is powered by two AAA batteries and is suitable for monitoring and current measurement in various electrical systems.
- Measuring range of 0 to 60 A
- Frequency response up to 20 kHz
Fluke i400 400 Amp AC Current Clamp
The Fluke i400 is an AC current clamp that serves as a companion to digital multimeters. It measures up to 200 A AC and provides a 1 mA per amp output for easy reading on the meter. The clamp has a maximum conductor diameter of 20 mm and carries a CAT III 600 V safety rating.
It is designed to allow users to take accurate current readings without breaking the circuit, making it a standard option for multimeter-based current measurement.
- 1 mA per amp output for multimeter compatibility
- CAT III 600 V safety rating
ZCZQC SCT-013 0-100A Split-Core Current Transformer
The ZCZQC SCT-013 is a non-invasive AC current sensor with a split-core design that allows for open-close installation. It measures 0 to 100 A AC and is made of ferrite material. The device features a 1 m lead wire and offers two output forms: current output or voltage output (requiring an added load resistance).
It uses a 3.5 mm cable jack and is suitable for applications such as lighting equipment, AC motors, and overcurrent protection monitoring.
- Split-core design for non-invasive installation
- Measures 0 to 100 A AC
Fluke i410 AC/DC Current Clamp
The Fluke i410 is a current clamp listed as an AC/DC model in its title, though its features specify measuring up to 200 A AC. It provides a 1 mA per amp output, which guarantees easy reading on a digital multimeter. The clamp has a maximum conductor diameter of 20 mm and carries a CAT III 600 V safety rating.
It is designed to allow users to take accurate current readings without breaking the circuit, serving as a companion to standard multimeters.
- 1 mA per amp output for multimeter compatibility
- Maximum conductor diameter of 20 mm
Hantek CC-65 AC/DC Current Clamp for Oscilloscope
The Hantek CC-65 is an AC/DC current clamp probe designed for oscilloscopes, featuring a 20 kHz bandwidth. It offers output options of 10 mV/A and 100 mV/A, with a range of 20 mA to 65 A. The device connects via a BNC plug, allowing users to observe current waveforms on an oscilloscope.
It is suitable for power circuit measurement, malfunction analysis, and motor drive measurement, serving as a transducer for both multimeters and oscilloscopes.
- 20 kHz bandwidth for waveform observation
- BNC connector for oscilloscope compatibility
Head-to-Head Comparisons
Fluke I200 vs Fluke i400: Multimeter Companion Clamps
Both the Fluke I200 and Fluke i400 are AC current clamps designed to work as companions to digital multimeters. They share a 1 mA per amp output and a maximum conductor diameter of 20 mm. Both carry a CAT III 600 V safety rating and are designed to measure up to 200 A AC without breaking the circuit.
The primary distinction is in their specific model designations, as the supplied data lists identical core measurement features for both. Buyers should choose based on availability and specific multimeter compatibility needs, as the functional specifications provided are the same.
Fluke 301D/ESP vs Fluke I200: Standalone vs Probe
The Fluke 301D/ESP is a standalone clamp meter, while the Fluke I200 is a probe that requires a separate digital multimeter. The 301D/ESP measures AC current up to 600 A and includes voltage, resistance, continuity, and capacitance functions, making it a self-contained tool. It features a slim 10 mm jaw and a CAT III 300 V rating.
The I200 measures up to 200 A AC with a 1 mA per amp output and a CAT III 600 V rating. Choose the 301D/ESP if you need a portable, all-in-one meter for tight spaces; choose the I200 if you already own a multimeter and need a higher safety-rated probe.
Hantek CC-65 vs TECPEL CA-60: Oscilloscope vs Transmitter
The Hantek CC-65 is designed for oscilloscopes with a BNC connector and 20 kHz bandwidth, allowing for waveform observation. It measures 20 mA to 65 A. The TECPEL CA-60 is a transmitter probe with a 0 to 60 A range and 20 kHz frequency response, offering 1 mV/10 mA or 1 mV/100 mA DC outputs.
The Hantek is better for visualizing waveforms on a scope, while the TECPEL is suited for data logging or meter inputs with specific voltage/current output needs. Both handle similar amperage ranges but serve different instrument types.
Buying Guide
Jaw Size and Conductor Diameter
Check the maximum conductor diameter and jaw thickness before purchasing. The Fluke 301D/ESP features a slim 10 mm jaw, ideal for tight spaces. The Fluke I200 and i400 have a 20 mm maximum conductor diameter. If you are working in crowded panels, a thinner jaw may be necessary to fit around existing wires without disconnecting them.
Safety Rating and Environment
Match the CAT safety rating to your working environment. The Fluke I200, i400, and ZIBOO i600E carry a CAT III 600 V rating. The Fluke 301D/ESP has a CAT III 300 V rating, suitable for common residential and commercial settings. Ensure the rating covers the voltage levels you expect to encounter in your specific testing scenarios.
Output Compatibility
Verify that the clamp's output matches your meter's input. The Fluke I200 and i400 provide a 1 mA per amp output. The ZIBOO i600E provides a 1 mV/A AC output. The Hantek CC-65 offers 10 mV/A or 100 mV/A outputs for oscilloscopes. Using the wrong output type can lead to inaccurate readings or damage to your instrument.
AC vs AC/DC Capability
Determine if you need to measure DC current. The Fluke 301D/ESP and Hantek CC-65 are listed as AC/DC capable. The Fluke I200 and i400 are specified as AC clamps in their features. The TECPEL CA-60 is an AC/DC transmitter. If you only measure AC mains current, an AC-only clamp may be sufficient and simpler.
Frequently Asked Questions
Can I use a current clamp with any multimeter?
No, you must check the output type. Some clamps output 1 mA per amp, while others output 1 mV per amp. Ensure your multimeter has the correct input jack and range to accept the specific signal from the clamp you choose.
What does CAT III 600 V mean?
It is a safety rating indicating the clamp is designed to withstand transient overvoltages in specific electrical environments. CAT III 600 V is suitable for distribution panels and similar applications, while CAT III 300 V is for lower voltage settings.
Do I need to break the circuit to measure current?
No, current clamps are designed to measure current without breaking the circuit. You simply open the jaw and place it around a single conductor. This allows for non-invasive measurement in live systems.
What is the difference between a clamp meter and a current probe?
A clamp meter is a standalone device with a display, like the Fluke 301D/ESP. A current probe, like the Fluke I200, is an accessory that connects to a separate multimeter or oscilloscope to provide current measurement capability.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
