Selecting the right electrical calibrator depends on the specific signals you need to source, measure, or simulate in your industrial environment. Whether you are verifying HART communication, testing thermocouple temperatures, or checking basic current loops, the tool must match the requirements of your transmitters and control systems.
This comparison examines seven calibrators that range from compact loop testers to multifunction process calibrators. We look at documented features such as loop power capabilities, signal accuracy, and output functions to help you identify the tool that fits your field calibration workflow.
Our pick: Fluke 709H Loop Calibrator. The Fluke 709H includes a built-in 250-ohm resistor specifically for HART communication, making it a focused choice for verifying HART-enabled transmitters.
Our 3 picks for different needs
Fluke 709H Loop Calibrator
The Fluke 709H includes a built-in 250-ohm resistor specifically for HART communication, making it a focused choice for verifying HART-enabled transmitters.
Read the details
ennologic eC370T Process Calibrator
The ennoLogic eC370T supports eight thermocouple types and offers ramp and ladder output functions, which is useful for testing temperature-based process control loops.
Read the details
Triplett PCAL300 Loop Calibrator
The Triplett PCAL300 features automatic sawtooth and triangular output current step functions, which helps technicians verify the dynamic response of control loops.
Read the detailsAll products, in detail
Fluke 709H Loop Calibrator
The Fluke 709H is a compact loop calibrator designed for HART communication and basic current loop testing. It features a built-in 250-ohm resistor and 24V DC loop power, allowing users to power and measure two-wire transmitters without external supplies. The device offers 0.01% reading accuracy and a Quick-Set knob for intuitive setup.
It is powered by six AAA batteries, making it a portable option for technicians who need to verify HART-enabled devices in the field.
- Includes built-in 250-ohm resistor for HART communication
- Provides 24V DC loop power with mA measure mode
ennologic eC370T Process Calibrator
The ennoLogic eC370T is a multifunction process calibrator that handles voltage, current, and thermocouple temperature signals. It features a numeric keypad with hotkey programming for rapid signal output and includes ramp and ladder output functions for dynamic testing. The device measures voltage up to 20V and current up to 24mA, while supporting eight types of thermocouples.
Its built-in 24V loop supply simplifies testing of 2-wire current loops by eliminating the need for a separate multimeter.
- Supports thermocouple types K, J, E, T, N, S, R, and B
- Features hotkey programming for immediate signal output
TestHelper TH77 Process Calibrator
The TestHelper TH77 is a multifunctional digital multimeter calibrator focused on loop power and HART resistance. It provides a 24V loop power supply and includes a built-in 250-ohm HART loop resistance for communication testing. The device is designed for measuring current and detecting loop status.
Its compact form factor makes it suitable for technicians who require a dedicated tool for basic loop verification and HART device configuration without the complexity of a full process calibrator.
- Includes built-in 250-ohm HART loop resistance
- Provides 24V loop power supply for transmitter testing
Fluke 725 Multifunction Process Calibrator
The Fluke 725 is a rugged, streamlined process calibrator capable of sourcing and simulating a wide range of signals including volts, mA, thermocouples, RTDs, frequency, ohms, and pressure. Its easy-to-read screen allows users to view input and output simultaneously, which is useful for verifying transmitter behavior.
The device is designed to stand up to field use, offering a reliable option for technicians who need to calibrate diverse sensor types and transmitters in industrial environments.
- Sources and simulates pressure, frequency, and ohms
- Displays input and output simultaneously on the screen
LB78 Signal Generator
The LB78 is a current and voltage signal generator designed for maintaining PLCs, DCS, and field instruments. It features a rational key layout with independent keys for each function, ensuring fast response times. The device includes a built-in one-time quick-break fuse to protect against misinsertion of 110V or 220V supplies.
Its compact, grit-finished shell is designed to resist soiling and scratching, making it a durable option for technicians who need a portable signal source for basic loop testing.
- Includes built-in quick-break fuse for supply protection
- Features independent keys for all functions
LB78 Signal Generator (T-king)
This T-king branded LB78 signal generator offers similar functionality to other LB78 models, focusing on 4-20mA and 0-10V signal generation. It utilizes stable chips for the DA, reference voltage, and operational amplifier to improve temperature stability and long-term aging performance. The device features a built-in battery for low power dissipation and long standby time.
Its self-protection fuse and rational key layout make it a practical choice for technicians who need a reliable, portable signal tester for field instruments.
- Uses stable chips for improved temperature stability
- Features built-in battery for long standby time
Triplett PCAL300 Loop Calibrator
The Triplett PCAL300 is a loop process calibrator that provides 24V loop power while simultaneously conducting mA current measurements. It offers source and measure accuracy up to 0.02% and allows users to adjust the current span from 0-20mA or 4-20mA with percentage readout. The device includes dynamic output functions such as automatic sawtooth or triangular step functions.
Built-in features like a flashlight, auto power off, and low battery indicator enhance its usability in field conditions.
- Provides simultaneous 24V loop power and mA measurement
- Includes dynamic sawtooth and triangular output functions
Head-to-Head Comparisons
Fluke 709H vs TestHelper TH77: HART Loop Focus
Both the Fluke 709H and the TestHelper TH77 are designed for loop testing with HART communication capabilities. The Fluke 709H specifies a best-in-class accuracy of 0.01% reading and includes a Quick-Set knob for fast setup. The TestHelper TH77 also includes a built-in 250-ohm HART resistance and 24V loop power, but its listing emphasizes loop detection and current measurement without detailing the same level of accuracy or interface features.
If you need a tool with a documented high-accuracy specification and a dedicated setup knob, the Fluke 709H offers more defined performance metrics. If your primary need is basic loop detection and HART resistance verification, the TestHelper TH77 provides a straightforward, compact option.
ennologic eC370T vs Fluke 725: Signal Versatility
The ennoLogic eC370T and the Fluke 725 are both multifunction process calibrators, but they emphasize different signal types. The eC370T focuses on voltage, current, and thermocouple temperature, supporting eight thermocouple types and featuring hotkey programming for rapid signal output. The Fluke 725 offers a broader range of source and simulate capabilities, including pressure, frequency, and ohms, in addition to temperature and current.
If your work primarily involves temperature sensors and current loops, the eC370T’s specific thermocouple support and hotkeys may streamline your workflow. If you need to calibrate a wider variety of sensor types, including pressure and frequency, the Fluke 725 provides more comprehensive signal coverage.
LB78 vs Triplett PCAL300: Loop Power and Protection
The LB78 signal generator and the Triplett PCAL300 both serve as portable loop tools, but they differ in their protective features and output functions. The LB78 includes a built-in one-time quick-break fuse to protect against misinsertion of 110V or 220V supplies, which is a specific safety feature for technicians working in mixed-voltage environments.
The Triplett PCAL300 emphasizes dynamic output functions, offering automatic sawtooth and triangular step functions for testing control loop responses. If your primary concern is protecting the device from accidental high-voltage insertion, the LB78’s fuse is a notable feature. If you need to test the dynamic behavior of a loop with step functions, the Triplett PCAL300 offers more advanced output capabilities.
Buying Guide
Loop Power and Measurement
Check if the calibrator provides 24V loop power and can measure current simultaneously. This feature allows you to power and read a two-wire transmitter without needing a separate multimeter. The Fluke 709H, TestHelper TH77, ennoLogic eC370T, and Triplett PCAL300 all list 24V loop power capabilities.
Ensure the device’s current measurement range matches your transmitter’s output, typically 4-20mA, to verify proper operation.
HART Communication Support
If you are testing HART-enabled devices, look for a built-in 250-ohm resistor. This resistance is required for HART communication over a 4-20mA loop. The Fluke 709H and TestHelper TH77 explicitly mention this built-in resistor. Without it, you would need an external resistor to communicate with HART devices, which adds complexity to your field setup.
Verify that the calibrator’s HART support matches the version used by your transmitters.
Temperature Signal Simulation
For calibrating temperature sensors, determine if you need thermocouple or RTD simulation. The ennoLogic eC370T supports eight thermocouple types, while the Fluke 725 supports both thermocouples and RTDs. If your facility uses a specific type of temperature sensor, ensure the calibrator can simulate that signal.
The eC370T also offers ramp and ladder output functions, which can be useful for testing how a control system responds to changing temperatures.
Portability and Durability
Field calibrators must withstand industrial environments. Look for rugged designs and protective features. The Fluke 725 is described as rugged and reliable for field use. The LB78 features a grit-finished shell that resists soiling and scratching, along with a built-in fuse for supply protection. Consider the device’s size and battery life if you will be carrying it for extended periods.
Compact, battery-powered units like the Fluke 709H and LB78 are designed for portability.
Frequently Asked Questions
What is the difference between a loop calibrator and a process calibrator?
A loop calibrator typically focuses on current loops and HART communication, while a process calibrator can source and measure a wider range of signals, including voltage, temperature, and pressure. Process calibrators are more versatile for testing diverse sensor types.
Do I need a 250-ohm resistor for HART communication?
Yes, HART communication requires a 250-ohm resistor in the loop. Some calibrators, like the Fluke 709H and TestHelper TH77, have this resistor built in, eliminating the need for an external component during testing.
Can a calibrator power a two-wire transmitter?
If the calibrator has a 24V loop power supply, it can power a two-wire transmitter. This allows you to measure the transmitter’s current output without needing a separate power supply or multimeter.
What is a ramp output function used for?
A ramp output function gradually changes the signal over time. This is useful for testing how a control system or transmitter responds to a changing input, such as a rising temperature or pressure.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
