Selecting the right electronic component flow sensor depends on whether you are managing water pressure in a home or building a drone flight system. Water flow switches typically automate pump operation based on pressure or flow rate, while optical flow sensors provide motion and distance data for aerial vehicles.
This comparison covers six distinct options, including brass and plastic switches for tap water and a compact optical module for drones. Each product serves a specific technical need, from low-pressure domestic boosters to precision beverage measurement and flight controller integration.
Our pick: Tyenaza AC 220V G3/4" Water Flow Switch. The Tyenaza switch activates at pressures above 0.03 KG, making it suitable for areas with low water pressure and solar water heater circulation.
Our 3 picks for different needs
Tyenaza AC 220V G3/4" Water Flow Switch
The Tyenaza switch activates at pressures above 0.03 KG, making it suitable for areas with low water pressure and solar water heater circulation.
Read the details
MicoAir MTF-01P Optical Flow & Range Sensor
The MicoAir MTF-01P integrates optical flow and ToF ranging to provide stable altitude data for ArduPilot, PX4, and INAV flight controllers.
Read the details
DIGITEN FL-308D 3/8 Inch Water Flow Sensor
The DIGITEN FL-308D uses food-grade POM material and measures flows from 0.3 to 10 L/min, fitting beverage dispensing systems.
Read the detailsAll products, in detail
Tyenaza AC 220V G3/4" Water Flow Switch
The Tyenaza water flow switch is designed for AC 220V systems with G3/4"-3/ threads. It activates when water pressure exceeds 0.03 KG, making it suitable for low-pressure domestic tap water and solar water heater circulation. The unit uses electronic components for spark-free control and features a separated induction room to prevent magnetic interference from iron-containing materials.
It is a practical choice for homeowners needing automatic pump control in areas with variable water pressure.
- Activates at water pressure greater than 0.03 KG
- Maximum operating temperature of 70°C
MicoAir MTF-01P Optical Flow & Range Sensor
The MicoAir MTF-01P is a compact 8 g module integrating PMW3901 optical flow and laser ToF ranging for drone flight controllers. It supports automatic firmware detection for ArduPilot, PX4, and INAV, simplifying protocol configuration. The sensor provides ranging from 0.02 to 12 meters with a 2 cm dead zone and outputs data via UART at up to 100 Hz.
This dual-function sensor is ideal for pilots needing stable altitude hold and positioning in outdoor environments with strong light.
- Weight of 8 g with dimensions of 33.2 x 20.8 x 16.8 mm
- Supports MAVLink v1, MSP v2, and Micolink protocols
Navien 30012033B Dhw Flow Sensor
The Navien 30012033B is a dedicated flow sensor for domestic hot water systems. As a replacement part for Navien boilers, it ensures accurate flow detection for heating operations. The listing provides the specific model number for compatibility verification but does not include detailed technical specifications in the source data.
Buyers should verify their boiler model number to ensure this sensor is the correct fit for their existing Navien equipment.
- Model number 30012033B
- Designed for Navien domestic hot water systems
Navien 30008571A Flow Sensor
The Navien 30008571A is another flow sensor option for Navien heating systems. Like the 30012033B model, it serves as a critical component for monitoring water flow in boiler applications. The source data does not provide specific technical features or installation details for this variant. Shoppers should cross-reference this model number with their specific Navien boiler manual to confirm compatibility before purchasing.
- Model number 30008571A
- Branded by Navien for heating applications
DIGITEN FL-308D 3/8 Inch Water Flow Sensor
The DIGITEN FL-308D is a food-grade POM flow Hall sensor designed for beverage and drink applications. It measures flow rates from 0.3 to 10 L/min and features a 3/8 inch size without threads, making it easy to install in compact systems. The sensor uses bearings in the rotating part for durability and has a light, nimble outline.
This is a suitable choice for users building or maintaining beverage dispensing equipment that requires precise flow measurement.
- Flow range of 0.3 to 10 L/min
- Constructed from food-grade POM material
Garosa 110V G1" Brass Water Flow Sensor Switch
The Garosa water flow sensor switch operates on 110V and features a G1" thread for tap water booster pumps. It starts automatically when water flow speed is at least 1.5 L/min and stops when the faucet is closed. Made from high-temperature brass, it handles both cold and hot water conditions.
The electronic control device is totally enclosed to prevent sparks, offering a safe solution for automatic pump control in residential settings.
- Starts at water flow speed of 1.5 L/min or higher
- Constructed from high-temperature brass material
Head-to-Head Comparisons
Tyenaza vs Garosa: Voltage and Thread Differences
The Tyenaza and Garosa switches both automate pump control but differ in electrical requirements and physical connections. The Tyenaza model operates on AC 220V and uses G3/4"-3/ threads, while the Garosa model runs on 110V with a G1" thread. This voltage distinction is critical for buyers in different regions, as 220V systems are common in many international markets while 110V is standard in North America.
Additionally, the Tyenaza activates at a pressure threshold of 0.03 KG, whereas the Garosa requires a flow speed of at least 1.5 L/min to start. Buyers should verify their local voltage and pipe thread sizes to ensure compatibility.
MicoAir vs DIGITEN: Drone Optics vs Liquid Measurement
The MicoAir MTF-01P and DIGITEN FL-308D serve entirely different functions despite both being flow sensors. The MicoAir is an optical module for drones, using laser ToF ranging and PMW3901 optical flow to determine altitude and position. It outputs data via UART at 100 Hz for flight controllers.
In contrast, the DIGITEN is a Hall sensor for measuring liquid flow in beverage systems, with a range of 0.3 to 10 L/min. The MicoAir is for aerial navigation, while the DIGITEN is for fluid dynamics in food-grade applications. There is no direct functional overlap between these two products.
Navien 30012033B vs 30008571A: Model Specificity
Both the Navien 30012033B and 30008571A are flow sensors designed for Navien heating systems. The source data does not provide detailed technical specifications or feature lists for either model, making a direct feature comparison impossible. The primary distinction is the model number, which indicates they are likely intended for different boiler series or specific component slots within the Navien product line.
Buyers must check their specific boiler manual or existing part number to determine which of these two sensors is the correct replacement. Without additional technical data, the choice is driven entirely by model compatibility.
Buying Guide
Verify Voltage and Thread Compatibility
Before purchasing a water flow switch, confirm the voltage of your local power supply and the thread size of your plumbing. The Tyenaza switch requires 220V, while the Garosa requires 110V. Mismatching voltage can damage the electronic control components. Additionally, ensure the thread size, such as G1" or G3/4", matches your existing pipe fittings to prevent leaks and ensure a secure installation.
Match Sensor Type to Application
Determine if you need a liquid flow meter or an optical motion sensor. Water pumps and boilers require Hall or pressure-based switches like the DIGITEN or Navien models. Drones and robotics require optical flow sensors like the MicoAir MTF-01P, which use light to detect motion and distance.
Using a liquid sensor for a drone or an optical sensor for a water pump will result in a non-functional system.
Check Flow Rate and Pressure Thresholds
Each sensor has a specific activation threshold. The Tyenaza activates at pressures above 0.03 KG, while the Garosa starts at flow speeds of 1.5 L/min. The DIGITEN measures flows from 0.3 to 10 L/min. Ensure your system's operating parameters fall within the sensor's specified range.
If your water pressure is too low for the sensor's threshold, the pump may not activate, or the sensor may not provide accurate readings.
Consider Material and Temperature Ratings
For water applications, check the material and temperature limits. The Garosa uses high-temperature brass, and the Tyenaza is rated for up to 70°C, making them suitable for hot water systems. The DIGITEN uses food-grade POM, which is essential for beverage applications. For drones, the MicoAir features temperature compensation to maintain accuracy in varying environmental conditions.
Selecting the right material ensures durability and safety in your specific operating environment.
Frequently Asked Questions
Can I use the MicoAir sensor with any drone?
The MicoAir MTF-01P is compatible with flight controllers running ArduPilot, PX4, or INAV firmware. It automatically detects the firmware and selects the correct protocol. Ensure your drone's flight controller supports these firmware versions and has the necessary UART ports for data output.
What is the difference between the two Navien sensors?
The source data does not provide technical details distinguishing the 30012033B and 30008571A models. They are likely designed for different Navien boiler series. You must check your specific boiler's manual or part number to determine which sensor is the correct replacement for your system.
Is the DIGITEN sensor suitable for hot water?
The DIGITEN FL-308D is described as a food-grade POM sensor for beverage drinks. The source data does not specify a maximum temperature rating for this model. For hot water applications, the Tyenaza and Garosa switches are explicitly rated for high temperatures, making them more suitable for thermal systems.
Do these sensors require professional installation?
Installation complexity varies by product. The DIGITEN sensor is described as easy to install due to its small size. Water switches like the Tyenaza and Garosa involve plumbing connections and electrical wiring, which may require a professional to ensure safety and proper sealing. Drone sensors require careful wiring to the flight controller.
This article is part of our complete guide Electronics — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
