Selecting the right linear sensor depends on whether you need a raw component, a pre-assembled module, or a specialized encoder. The options in this comparison range from bulk Hall effect chips for custom PCBs to industrial-grade pull rod sensors with IP67 protection.
Each product serves a different stage of the development process. Hobbyists may prefer the plug-and-play KY-024 modules, while engineers might choose the SparkFun TMAG5273 for its precision and low power consumption. Understanding the output type, voltage requirements, and physical form factor is key to making the right choice for your specific application.
Our 3 picks for different needs
SparkFun Linear 3D Hall-Effect Sensor TMAG5273 (Qwiic)
The SparkFun TMAG5273 offers ±0.5% accuracy and I2C communication for precise 3D field detection.
Read the details
CALT 1 Meter Linear String Pot Encoder Sensor
The CALT 1-meter string pot provides a 6-digit display and ABZ signals for large-scale motion tracking.
Read the details
Injection Electronic Ruler Pull Rod Displacement Sensor
The stainless steel pull rod sensor features an IP67 rating and 0.01mm repeatability for robust use.
Read the detailsAll products, in detail
ALLECIN AH3503 Linear Hall Element (20 Pack)
This bulk pack of AH3503 linear Hall elements is designed for engineers who need raw components for custom circuit boards. Operating between 4.5V and 6V, these 3-pin sensors offer a 50Ω output resistance. The listing highlights their use in speed measurement, home appliances, and position detection.
The packaging includes printed markings for easy identification, which is helpful when managing multiple identical components in a workshop. This option suits buyers who are building their own sensor modules rather than using pre-assembled breakout boards.
- Operating voltage range is 4.5V to 6V with a 50Ω output resistance.
- Sold in a 20-piece pack with printed markings for identification.
Injection Electronic Ruler Pull Rod Displacement Sensor
This stainless steel linear position sensor features an IP67 rating, making it suitable for environments where dust or moisture might be present. It uses a potentiometer principle to provide a continuous output that changes with displacement. The listing specifies a repeatability of 0.01mm and an infinite uninterrupted analysis resolution.
The smooth engineering rod and plug-type connection are designed for durability and ease of integration. This sensor is a strong choice for industrial applications requiring robust physical construction and precise positional feedback.
- Features an IP67 rating and stainless steel construction for durability.
- Offers 0.01mm repeatability and uses a potentiometer principle.
KY-024 Linear Magnetic Hall Switch Module (3 Pack)
This 3-pack of KY-024 modules provides a convenient starter kit for hobbyists and developers. Each module includes a linear Hall effect sensor and a comparator circuit that outputs a single digital signal. The design allows for direct control by a microcontroller, making it ideal for simple on/off detection tasks.
The modules are compatible with common development boards and are suitable for speed counting or proximity switching. Buying in a pack is useful for projects that require multiple sensors or for those who want spares for prototyping.
- Includes three KY-024 modules with single digital signal output.
- Designed for direct microcontroller control and speed counting.
CALT 1 Meter Linear String Pot Encoder Sensor
This 1-meter string potentiometer encoder provides a 6-digit digital meter counter display for immediate readout. It operates on 5-26V DC and features a push-pull output with ABZ 3 signals. The string pot design is well-suited for measuring linear displacement over a long range, such as in gantry systems or large-scale motion tracking.
The inclusion of a digital display simplifies debugging and calibration without requiring an external computer. This is a practical option for users who need a self-contained measurement tool with high voltage flexibility.
- 1-meter stroke length with a built-in 6-digit digital display.
- Operates on 5-26V DC with push-pull ABZ 3 signal output.
Bestol A1302 Ratiometric Linear Hall Effect Chip (10 Pack)
The Bestol A1302 is a ratiometric linear Hall effect sensor chip sold in a 10-piece pack. Ratiometric sensors provide an output voltage that is proportional to the supply voltage, which can simplify calibration in certain circuit designs. These chips are bare components intended for integration into custom PCBs.
The listing does not specify detailed operating parameters like voltage range or sensitivity, so buyers should verify datasheet specifications for their specific application. This product is best for electronics engineers who require a specific ratiometric output characteristic for their sensor design.
- Ratiometric linear Hall effect sensor chip.
- Sold in a 10-piece pack for bulk component procurement.
SparkFun Linear 3D Hall-Effect Sensor TMAG5273 (Qwiic)
The SparkFun TMAG5273 is a low-power, high-precision 3D Hall-effect sensor board using the Qwiic connector system. It features a configurable magnetic range of ±40 mT or ±80 mT and includes an integrated angle calculation engine. The board offers I2C communication, a dedicated interrupt pin, and a disable button for power management.
With a typical accuracy of ±0.5% and a sleep current of 1µA, it is well-suited for battery-powered projects requiring precise magnetic field measurement. The Qwiic interface simplifies wiring for rapid prototyping.
- 3D Hall-effect sensor with ±0.5% typical accuracy and I2C interface.
- Low power consumption of 2.3mA active and 1µA in sleep mode.
KY-024 Linear Magnetic Hall Effect Sensor Module (10 Pack)
This 10-pack of KY-024 modules offers a larger quantity for projects requiring multiple sensors. Each module uses an A3141 chipset and a 3144 linear Hall effect sensor with an LM393 comparator. It provides both analog and digital outputs, with a potentiometer to adjust sensitivity. The modules are compatible with Raspberry Pi, ESP8266, and other microcontrollers.
The inclusion of two LEDs helps visualize the sensor state during testing. This bulk option is ideal for developers building multi-sensor arrays or those who want a cost-effective source of spare parts.
- 10-pack of modules with analog and digital outputs.
- Features a potentiometer for sensitivity adjustment and two status LEDs.
SING F LTD KY-024 Linear Magnetic Hall Effect Sensor Module (5 Pack)
The SING F LTD 5-pack of KY-024 modules provides a middle-ground quantity for prototyping. Like other KY-024 variants, it includes a 3144 linear Hall effect sensor and an LM393 dual differential comparator. The modules operate at DC 5V and offer both analog and digital outputs.
The potentiometer allows users to fine-tune the trigger point for their specific magnetic field strength. This pack is suitable for hobbyists who need a few sensors for a project but do not require the larger quantities found in 10-packs. It is a standard choice for educational kits and basic automation tasks.
- 5-pack of KY-024 modules operating at DC 5V.
- Includes a potentiometer for sensitivity adjustment and dual outputs.
Head-to-Head Comparisons
KY-024 3-Pack vs 10-Pack: Quantity and Value
The primary difference is the quantity included in the package. The 3-pack is suitable for a single project that requires a few sensors, while the 10-pack is better for developers who need multiple units or want spares. If you are building a multi-sensor array, the 10-pack provides more flexibility.
For a simple one-off project, the 3-pack may be sufficient.
SparkFun TMAG5273 vs ALLECIN AH3503: Module vs Chip
The SparkFun TMAG5273 is a complete sensor board with a Qwiic connector, I2C interface, and integrated angle calculation engine. It is designed for rapid prototyping and offers high precision with ±0.5% typical accuracy. In contrast, the ALLECIN AH3503 is a bare 3-pin Hall element chip intended for custom circuit board design.
The AH3503 operates at 4.5-6V and requires external circuitry to function. The SparkFun board is easier to use for beginners and offers more features out of the box. The AH3503 is better for engineers who need a specific component for a custom PCB. The choice depends on whether you need a ready-to-use module or a raw component.
CALT String Pot vs Injection Pull Rod: Form Factor
The CALT 1-meter string pot uses a flexible cable to measure linear displacement, making it suitable for applications where the sensor must follow a non-rigid path. It features a 6-digit digital display and ABZ signals. The Injection Electronic Ruler uses a rigid stainless steel pull rod with an IP67 rating, making it more robust for industrial environments.
The pull rod offers 0.01mm repeatability and is designed for durability. The string pot is more flexible in installation but may be less durable in harsh conditions. The pull rod is better for applications requiring high mechanical stability and resistance to dust and moisture. Choose based on the environmental conditions and installation constraints of your project.
Buying Guide
Output Type: Analog vs Digital
Decide whether you need a continuous analog signal or a discrete digital switch. Analog outputs, like those from potentiometers or ratiometric Hall sensors, provide a voltage that changes proportionally with position. This is useful for precise position tracking. Digital outputs, like those from KY-024 modules, provide a simple on/off signal.
This is ideal for proximity detection or speed counting. Some modules offer both, giving you flexibility. Consider how your microcontroller will process the signal. If you need high-resolution position data, an analog or encoder output is necessary. If you only need to detect presence, a digital switch is sufficient.
Voltage Compatibility
Check the operating voltage of the sensor against your power supply. The ALLECIN AH3503 operates at 4.5-6V, while the KY-024 modules operate at DC 5V. The CALT string pot supports a wider range of 5-26V DC. The SparkFun TMAG5273 is designed for 3.3V systems. Mismatched voltages can damage components or result in inaccurate readings.
If you are using a 5V microcontroller, ensure the sensor is rated for 5V. If you are using a 3.3V system, look for sensors that support lower voltages. Always verify the voltage specifications in the product details before integrating the sensor into your circuit.
Environmental Protection
Consider the environment where the sensor will be used. The Injection Electronic Ruler features an IP67 rating, making it resistant to dust and temporary immersion in water. This is crucial for outdoor or industrial applications. Other sensors, like the KY-024 modules and bare chips, do not have specified IP ratings and are best suited for indoor, controlled environments.
If your application involves moisture, dust, or vibration, choose a sensor with appropriate protection. For indoor hobby projects, standard modules are sufficient. For outdoor or harsh industrial settings, look for sensors with stainless steel construction and IP ratings.
Quantity and Packaging
Determine how many sensors you need for your project. Some products are sold as single units, while others come in packs of 3, 5, 10, or 20. Buying in bulk can be more cost-effective if you need multiple sensors or want spares. The KY-024 modules are available in 3, 5, and 10-packs.
The ALLECIN AH3503 is sold in a 20-pack. The Bestol A1302 is sold in a 10-pack. If you are a hobbyist working on a single project, a smaller pack may be sufficient. If you are a developer or educator, larger packs provide more flexibility. Check the current prices on the live product cards to compare the cost per unit for different pack sizes.
Frequently Asked Questions
What is the difference between a Hall effect sensor and a potentiometer?
Hall effect sensors use magnetic fields to detect position or speed, while potentiometers use mechanical resistance. Hall sensors are non-contact and durable, while potentiometers provide continuous analog output. Choose based on your application's need for contactless operation or precise analog measurement.
Can I use KY-024 modules with Raspberry Pi?
Yes, KY-024 modules are compatible with Raspberry Pi, ESP8266, and other microcontrollers. They operate at DC 5V and provide both analog and digital outputs. Ensure you use the correct voltage levels and pin configurations when connecting them to your microcontroller.
What does IP67 rating mean for a sensor?
IP67 indicates that the sensor is dust-tight and protected against temporary immersion in water up to 1 meter for 30 minutes. This makes it suitable for outdoor or industrial environments where dust and moisture are present. It is a key feature for robust, long-lasting sensor installations.
How do I choose the right stroke length for a linear sensor?
Measure the maximum distance you need to track. The CALT string pot offers a 1-meter stroke, which is suitable for large-scale motion. For shorter distances, look for sensors with smaller strokes. Ensure the sensor's stroke length matches your application's requirements to avoid mechanical interference or inaccurate readings.
This article is part of our complete guide Electronics — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
