Choosing the right extra long drill bit depends on the material you are drilling and the depth required. Standard bits often lack the reach for deep holes in thick lumber, metal plates, or structural elements.
This comparison examines eight different sets and single bits, ranging from 9-inch to 18-inch lengths. We look at the steel composition, point style, and size range to help you match the tool to your specific project needs.
Our 3 picks for different needs
VALYRIANTOOL 5-Piece M35 Cobalt Set
The M35 cobalt steel and 135-degree split point are designed for drilling into stainless steel and cast iron.
Read the details
Baker and Bolt 10-Piece 12-Inch Brad Point Set
The brad point tips and titanium coating offer superior centering and durability for wood projects.
Read the details
Irwin 1890707 18-Inch Installer Bit
The 18-inch length and flute hole allow for deep drilling and simultaneous wire pulling through walls.
Read the detailsAll products, in detail
NEIKO 10047A 5-Piece M2 HSS Set
This five-piece set features 12-inch bits made from heat-treated M2 high-speed steel. The standard sizes range from 1/8-inch to 3/8-inch, providing a versatile range for drilling into metal, wood, plastic, and PVC. The sharp pointed tips are designed to puncture tough materials for a smooth finish.
This set is a practical choice for users who need a compact collection of long bits for general-purpose drilling across various materials.
- Made from heat-treated M2 high-speed steel
- Includes five standard sizes from 1/8-inch to 3/8-inch
Baker and Bolt 10-Piece 12-Inch Brad Point Set
This ten-piece set includes 12-inch brad point bits with titanium coating, covering sizes from 1/8-inch to 1/2-inch. The brad point design offers superior centering and prevents skidding on wood surfaces. The set comes with a storage sleeve to keep the bits organized. It is suitable for bench drills and conventional hand drills, making it a good option for woodworkers who need a wide range of sizes for deep holes in hardwood, plywood, and plastic.
- Includes ten brad point bits with titanium coating
- Sizes range from 1/8-inch to 1/2-inch
COMOWARE 12-Piece 12-Inch Brad Point Set
This set contains twelve 12-inch brad point drill bits made from high carbon steel. The listed sizes include 1/8-inch, 3/16-inch, 1/4-inch, 5/16-inch, 3/8-inch, 7/16-inch, and 1/2-inch. The brad point tips are designed for drilling into wood, plastic, PVC, composite, and rubber. This configuration offers a high count of bits for users who want a comprehensive collection for deep drilling in soft materials.
- Made from high carbon steel
- Includes twelve 12-inch brad point bits
VALYRIANTOOL 5-Piece M35 Cobalt Set
This five-piece set features 12-inch bits made from M35 high-speed steel with 5% cobalt. The sizes range from 1/8-inch to 3/8-inch. The 135-degree split point and fully ground spiral groove are designed for drilling into stainless steel, cast iron, and other hard metals, as well as wood and plastic.
This set is ideal for users who need to drill deep holes in tough metallic materials.
- Made from M35 high-speed steel with 5% cobalt
- Features a 135-degree split point
Irwin 1890707 18-Inch Installer Bit
This single 18-inch bit is made from premium high carbon steel and features an 82-degree point for fast drilling in wood. It includes a hole in the flute and a 3-flatted shank with a hole for pulling wire through walls, ceilings, and floors. This specialized bit is designed for installers who need to drill deep holes and pull wire simultaneously.
It is a specific tool for electrical and low-voltage installation tasks.
- 18-inch length with a 1/4-inch diameter
- Includes a hole in the flute for wire pulling
7-Piece 9.05-Inch Brad Point Set
This seven-piece set features 9.05-inch brad point bits designed for deep drilling. The smaller diameters are made from high-speed steel, while the larger sizes use high carbon steel. The bits are designed to DIN 338 standards with double-ground spiral flutes for clean cuts. They come in a reusable eco-friendly pouch with laser-etched size markings.
This set is suitable for users who need deep holes in softwood, hardwood, and plastics.
- 9.05-inch length with double-ground spiral flutes
- Includes seven bits in a reusable pouch
5-Piece Metric HSS Twist Bit Set
This five-piece set includes extra long twist drill bits made from high-speed steel. The sizes are metric, ranging from 2mm to 5mm. The spiral design helps clear chips and debris for smoother operation. These bits are suitable for drilling into aluminum, wood, and plastics. This set is a good option for users who work with metric measurements and need long bits for deep holes in various materials.
- Made from high-speed steel
- Includes five metric sizes from 2mm to 5mm
HIPULX 10-Piece 12-Inch Brad Point Set
This ten-piece set features 12-inch brad point bits made from hardened carbon steel. The sizes range from 1/8-inch to 1/2-inch. Each bit has permanently laser-etched size markings and a factory-applied anti-rust coating. The set includes a storage case for organization. This is a comprehensive option for woodworkers who need a wide range of sizes for deep drilling in thick wood and beams.
- Made from hardened carbon steel (HRC52)
- Includes ten bits with laser-etched markings
Head-to-Head Comparisons
NEIKO M2 HSS vs VALYRIANTOOL M35 Cobalt
Both sets offer five 12-inch bits in the same size range, from 1/8-inch to 3/8-inch. The NEIKO set uses M2 high-speed steel, which is suitable for general drilling in metal, wood, and plastic. The VALYRIANTOOL set uses M35 steel with 5% cobalt, which is harder and better suited for tough metals like stainless steel and cast iron.
If you are drilling into hard metals, the cobalt bits are the better choice. For general-purpose work, the M2 bits are a standard option.
Baker and Bolt 10-Piece vs HIPULX 10-Piece
Both sets include ten 12-inch brad point bits with similar size ranges. The Baker and Bolt set features titanium-coated bits and a storage sleeve. The HIPULX set uses hardened carbon steel with laser-etched markings and includes a storage case. The HIPULX bits are noted for their HRC52 hardness, while the Baker and Bolt bits emphasize the titanium coating for durability.
Both are excellent for woodworking, with the choice depending on whether you prefer the coating or the specific steel hardness.
Irwin 18-Inch Installer vs 9.05-Inch Set
The Irwin bit is a single 18-inch tool designed for installers who need to pull wire through deep holes. It features a specific 82-degree point and a hole in the flute. The 9.05-inch set is a collection of seven brad point bits for general deep drilling in wood and plastic.
The Irwin bit is a specialized tool for electrical work, while the 9.05-inch set is for general woodworking. They serve very different purposes, with the Irwin bit being a niche tool for wire pulling.
Buying Guide
Selecting the Right Steel
The material of the bit determines what it can drill. High-speed steel (HSS) is standard for wood and mild steel. Cobalt steel is harder and better for stainless steel and cast iron. Carbon steel is often used for wood and softer materials. Check the steel type on the listing to ensure it matches your target material.
For example, Multitool Accessories often require specific bit materials to ensure compatibility and performance.
Understanding Point Styles
Brad point bits have a sharp center tip that prevents skidding and creates clean holes in wood. Twist bits are general-purpose and work in many materials. Split point bits are designed for metal to reduce friction. Choose a brad point for woodworking, a twist bit for general use, or a split point for metal.
The point style significantly affects the quality of the hole and the ease of drilling.
Matching Length to Project
The length of the bit must exceed the depth of the hole you need to drill. A 12-inch bit can drill holes up to 12 inches deep, but the actual drilling depth may be less due to the shank. An 18-inch bit is for very deep holes.
Consider the thickness of your material when choosing a length. If you are working with thick beams or walls, a longer bit is necessary. Socket Sets are another example of tools where size and length must match the specific task.
Considering Size Range
Sets come in various size ranges, from 1/8-inch to 1/2-inch. Some sets include metric sizes, while others use imperial. Check the sizes included to ensure they cover your needs. A set with a wide range is more versatile, but you may only need a few specific sizes.
Consider what diameters you will be drilling most often. Having the right size on hand saves time and prevents the need to buy additional bits.
Frequently Asked Questions
Can I use a brad point bit for metal?
Brad point bits are designed for wood. While they can drill into soft metals, they are not ideal for hard metals. For metal, use a twist bit or a split point bit made from cobalt or high-speed steel. The brad point tip is not designed to handle the hardness of metal.
What is the difference between M2 and M35 steel?
M2 is a standard high-speed steel, while M35 is a cobalt high-speed steel. M35 is harder and more wear-resistant, making it better for drilling into tough metals like stainless steel. M2 is suitable for general-purpose drilling in wood and mild steel.
How deep can a 12-inch bit drill?
A 12-inch bit can drill holes up to 12 inches deep, but the actual depth may be less due to the shank and the point. The drilling depth is the length of the cutting part of the bit. Check the specific drilling depth listed for the bit to ensure it meets your needs.
Do I need a special drill for long bits?
You can use a standard drill, but a drill with a high torque setting is helpful for long bits. The longer the bit, the more torque is required to turn it. Ensure your drill can handle the length and the material you are drilling. A drill press is also a good option for long, straight holes.
This article is part of our complete guide Tools & Home Improvement — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
