Selecting the correct faucet stem requires matching the specific valve type and thread configuration of your fixture. A mismatched stem will not seal properly, leading to continued leaks even after installation. The options in this comparison range from genuine OEM parts for major brands to universal brass and ceramic cartridges for standard fittings.
Before purchasing, identify whether your faucet uses a quarter-turn ceramic cartridge or a traditional compression stem. Check the thread size and spline count if your fixture uses a standard brass valve. This guide helps you distinguish between brand-specific replacements and universal repair kits to ensure a proper fit.
Our 3 picks for different needs
Delta RP25513 Stem Assembly
Choose this genuine Delta part if you have a two-handle Delta faucet and prefer the manufacturer's specific stem assembly.
Read the details
NADOBA Brass Ceramic Cartridge Set
Select this NADOBA set if your fixture uses a standard 1/2-inch thread and 20-tooth spline with a ceramic core.
Read the details
Pfister 9103740 Tub/Shower Stem
This is the correct choice for Pfister tub and shower faucets that require a stem with an integrated bonnet.
Read the detailsAll products, in detail
RP25513 Faucet Stem Replacement Kit
This two-pack replacement kit is designed for Delta two-handle faucets. It includes stems, quarter-turn stops, rubber seats, and springs to address leakage caused by component failure. The assembly features a brass stem and stainless steel plate for structural integrity. It is suitable for homeowners maintaining Delta fixtures who need a complete repair set for both hot and cold sides.
- Includes two stems, two quarter-turn stops, two rubber seats, and two springs.
- Constructed with a brass stem and stainless steel plate.
NADOBA Brass Ceramic Cartridge Set
This set contains two brass cartridges with ceramic cores and rubber O-rings. The 1/2-inch thread and 20-tooth spline design allow for standard wrench installation without special pullers. It is intended for kitchen, bathroom, and shower valves where a quarter-turn operation is required. The ceramic disc mechanism is designed to prevent scoring on the seat, offering a durable alternative to plastic components.
- Features a 1/2-inch thread and 20-tooth spline for standard seat compatibility.
- Constructed with a brass body, ceramic disc, and rubber O-ring.
Jadiver GM RP1740 Stem Repair Kit
Compatible with Delta two-handle faucets, this two-pack includes stems, seats, and stainless springs. It is designed for repairing lavatory, kitchen tub, and shower fixtures. The listing emphasizes the importance of cleaning metal shavings and mineral buildup from the valve before installation. This kit is a direct replacement option for the RP1740 cartridge model in Delta systems.
- Each pack includes two stems, two seats, and two stainless springs.
- Compatible with Delta two-handle lavatory, kitchen tub, and shower faucets.
Delta RP25513 Stem Assembly
This is a genuine Delta repair part for two-handle faucets. The sturdy stem unit assembly uses a brass stem and stainless steel plate to add strength and keep the faucet running smoothly. The part may arrive in either black or beige color. It is a single unit intended for replacement in Delta fixtures, providing an OEM solution for stem-related leaks.
- Genuine Delta repair part for two-handle faucets.
- Features a brass stem and stainless steel plate for added strength.
Saihisday Ceramic Stem Cartridge Pair
This lead-free ceramic stem cartridge is designed for standard faucets in bathrooms and kitchens. It features a G1/2-inch BSP thread and a 20-tooth spline, with a 3/8-inch – 16 PT diameter. The construction uses solid metal and ceramic for corrosion resistance. The package includes a pair of cartridges, suitable for replacing both hot and cold sides of a standard valve assembly.
- Features a G1/2-inch BSP thread and 20-tooth spline.
- Constructed with solid metal and ceramic, described as lead-free.
Pfister 9103740 Tub/Shower Stem
This is a genuine Pfister part designed specifically for use with Pfister faucets. It is a hot and cold tub/shower stem that includes a bonnet. The product is sold individually, meaning buyers must purchase separate units for each side of the valve. It is the appropriate replacement for Pfister-branded fixtures where a specific stem and bonnet assembly is required.
- Genuine Pfister part for use with Pfister faucets.
- Includes a bonnet and is sold individually.
Coolfell RP25513 Faucet Stem Kit
This two-pack is compatible with Delta two-handle bathroom and bathtub faucets. It includes two cartridges, two rubber seats, two springs, and two quarter-turn stops. The brass stem and stainless steel plate construction is designed for strength and resistance to deformation. It is an economical choice for resolving leaks without replacing the entire faucet, providing a comprehensive repair set.
- Includes two cartridges, two rubber seats, two springs, and two quarter-turn stops.
- Made with a brass stem and stainless steel plate.
Head-to-Head Comparisons
RP25513 Kits: Component Inclusions
Both the first and last listings offer two-pack RP25513 replacements for Delta two-handle faucets. The first kit includes stems, quarter-turn stops, rubber seats, and springs. The Coolfell kit includes the same core components: two cartridges, two rubber seats, two springs, and two quarter-turn stops. Both are constructed with brass stems and stainless steel plates.
The primary distinction is the brand of the aftermarket replacement, as both target the same Delta model number and offer similar material compositions for the stem assembly.
Ceramic Cartridges: Thread and Spline
The NADOBA and Saihisday products are both ceramic disc cartridges with brass bodies. The NADOBA set specifies a 1/2-inch thread and 20-tooth spline. The Saihisday cartridge specifies a G1/2-inch BSP thread and 20-tooth spline, with a 3/8-inch – 16 PT diameter. Both are designed for standard faucets in kitchens and bathrooms.
Buyers should verify their existing cartridge's thread type, as BSP and standard NPT threads may differ in pitch and diameter despite similar nominal sizes.
Delta OEM vs. Aftermarket RP1740
The Delta RP25513 is a genuine OEM part for two-handle faucets, while the Jadiver GM kit is an aftermarket replacement for the RP1740 model. The Delta part is sold as a single stem assembly, whereas the Jadiver kit is a two-pack including stems, seats, and springs.
The Delta part may arrive in black or beige, while the Jadiver kit is designed for lavatory, kitchen tub, and shower fixtures. The choice depends on whether your specific Delta fixture requires the RP25513 or the RP1740 model number.
Buying Guide
Identify the Valve Type
Determine if your faucet uses a compression stem or a ceramic cartridge. Compression stems often require a washer and spring, while ceramic cartridges use a disc and seat. The listings here include both types, such as the brass and ceramic NADOBA set and the Delta stem assemblies.
Matching the valve type is the first step in ensuring the new part will function correctly within the valve body.
Check Thread and Spline
For standard brass cartridges, the thread size and spline count are critical. The NADOBA and Saihisday products both feature a 20-tooth spline, but their thread specifications are listed as 1/2-inch and G1/2-inch BSP, respectively. Measure your old cartridge or consult the faucet manufacturer's specifications to confirm the exact thread type.
A mismatch here will prevent the cartridge from seating properly in the valve.
Brand Compatibility
Some stems are specific to certain faucet brands. The Pfister 9103740 is designed exclusively for Pfister faucets and includes a bonnet. The Delta RP25513 and RP1740 kits are designed for Delta two-handle faucets. Using a generic stem in a brand-specific fixture may result in a poor fit or seal.
Always verify the brand and model number of your existing faucet before selecting a replacement stem.
Pack Quantity and Needs
Most faucets have separate hot and cold valves, requiring two stems. The NADOBA, Saihisday, and Delta RP25513 kits are sold in pairs, covering both sides of the fixture. The Pfister stem is sold individually, so you will need to purchase two units for a complete replacement.
Check the package contents to ensure you are buying enough stems to replace both the hot and cold sides of your faucet.
Frequently Asked Questions
Can I use a generic stem in a Delta faucet?
It depends on the specific model. The RP25513 and RP1740 are specific Delta model numbers. Generic stems may not fit if the dimensions differ. It is safer to use a stem labeled as compatible with your specific Delta model number to ensure a proper seal and fit.
What is the difference between a stem and a cartridge?
A stem is often a compression-type part with a washer, while a cartridge is a sealed unit, often with a ceramic disc. Both control water flow. The terms are sometimes used interchangeably, but the internal mechanism and installation method differ. Check your faucet type to determine which part you need.
Do I need to replace both hot and cold stems?
If one side is leaking, you can replace just that side. However, stems often wear at similar rates. Replacing both at once ensures consistent performance and prevents the other side from failing soon after. Most kits are sold in pairs to facilitate this complete replacement.
How do I know if my cartridge is 20-tooth?
Count the splines or teeth on the edge of the old cartridge. The NADOBA and Saihisday products are specified as 20-tooth. If your old part has a different number of teeth, these specific cartridges will not fit. Counting the teeth is a simple way to verify compatibility before purchasing.
This article is part of our complete guide Tools & Home Improvement — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
