Selecting the correct replacement part for your fireplace requires matching the component to your specific fuel type and model. Gas fireplaces often rely on electronic ignition modules and thermopiles, while wood-burning units depend on physical seals and firebricks to maintain efficiency and safety.
This guide compares eight essential components, from electronic controls to physical gaskets and bricks. By understanding the specific function and compatibility of each part, you can ensure your fireplace operates safely and effectively.
Our 3 picks for different needs
Durablow CSA Certified IPI Control Module
The Durablow CSA-certified module is a direct fit for many gas fireplace brands requiring intermittent pilot operation.
Read the details
Midwest Hearth 5/8-inch x 84-inch Gasket Kit
The Midwest Hearth kit includes both the gasket and high-temperature cement, providing a complete sealing solution.
Read the details
9-inch x 4.5-inch Firebricks 6-Pack
The 6-pack of vermiculite firebricks offers a durable, high-temperature solution for replacing worn stove bricks.
Read the detailsAll products, in detail
24-inch Millivolt Thermopile Generator
This 24-inch thermopile generator is designed for gas fireplaces, water heaters, and gas fryers. It features a 750 mv rating and operates at normal working temperatures of 700-750°C. The unit offers spiral and two-pole plug-in connection types. Shoppers should verify their pilot burner nozzle is fully open to ensure sufficient flame heat for valve actuation.
This component is essential for maintaining the voltage required to keep the gas valve open during operation.
- 24-inch length with 750 mv rating
- Normal working temperature range of 700-750°C
Durablow CSA Certified IPI Control Module
The Durablow IPI-6000 module is a CSA-certified electronic ignition control for gas fireplaces. It is compatible with a wide range of OEM part numbers and brands, including Dexen, HHT, and Heatilator. The module operates on 3V input and is designed for intermittent pilot operation in LP and NG fireplaces.
It requires a qualified electrical technician for installation. This replacement module is a direct fit for units requiring specific cross-reference numbers like 593-592 or GM-6KA.
- CSA Certified for 2023 and later
- Compatible with LP and NG fireplaces
WINTACK 5/8-inch Self-Adhesive Wood Stove Gasket
This WINTACK gasket is a flat, self-adhesive tape designed for wood stoves and fireplaces. It measures 5/8 inch wide and 1/8 inch thick, with a total length of 72 inches. The fiberglass tape is impregnated with graphite to withstand temperatures up to 1100°F. The tight weave and high-temperature adhesive help prevent smoke and dust from escaping.
Installation is straightforward, requiring only the removal of the backing film to stick the gasket to the target surface.
- 5/8-inch wide and 1/8-inch thick
- Withstands temperatures up to 1100°F
Durablow IPI Pilot Ignition Control Module
Made in Taiwan, this Durablow IPI-6000 module serves as a direct replacement for various OEM ignition controls. It is compatible with brands such as Astria, Coleman, and Majestic. The module operates on 3V input and is intended for intermittent pilot operation in LP and NG fireplaces.
It is a 100% direct fit for units with specific cross-reference numbers. Buyers should verify their existing module is defective before ordering to ensure compatibility with their specific fireplace model.
- Made in Taiwan
- 3V input voltage for intermittent pilot operation
Midwest Hearth 5/8-inch x 84-inch Gasket Kit
This Midwest Hearth kit includes a 5/8-inch diameter rope gasket, 84 inches long, made in the USA. The graphite-impregnated fiberglass rope is designed to provide an airtight seal for wood stove doors. The kit includes professional-strength adhesive cement rated to 2,000°F. The rope can be trimmed with scissors to fit specific door channels.
This kit is compatible with major wood stove brands and is designed to prevent heat loss and smoke leakage.
- Includes 2,000°F rated adhesive cement
- Made in the USA with graphite impregnation
103779-01 Natural Gas Pilot ODS Assembly
This natural gas replacement pilot ODS assembly is compatible with specific fireplace models from the Desa family of brands. It is also suitable for private labels such as Comfort Glow, Glow Warm, and Vanguard. The part number 103779-01 is a direct replacement for units requiring this specific pilot assembly.
It is designed for natural gas applications. Shoppers should verify their fireplace model number to ensure this assembly is the correct fit for their unit.
- Compatible with Desa family of brands
- Designed for natural gas applications
Durablow TR1003 Remote Control Kit
The Durablow TR1003 kit provides wireless remote control for gas fireplaces equipped with millivolt valves or IPI modules. It includes a transmitter with an LCD screen, thermostat, and timer, along with a receiver box. The system operates within a 20-foot range and features a childproof safety lock.
The transmitter uses two AAA batteries, while the receiver uses four AA batteries. This kit allows users to control their fireplace from a distance, replacing the need for a wall switch.
- Operates within a 20-foot range
- Includes thermostat and timer features
9-inch x 4.5-inch Firebricks 6-Pack
This 6-pack of vermiculite firebricks measures 9 inches by 4.5 inches by 1.25 inches. They are designed for wood stoves and fireplaces, withstanding temperatures up to 2200°F. The bricks offer strong thermal insulation and are not as brittle as clay bricks. They are a common size for replacement in many stove models.
The flat surface ensures a smooth combustion chamber that is easier to clean. These bricks are not waterproof and should not be used outdoors.
- Withstand temperatures up to 2200°F
- 6-pack of 9-inch by 4.5-inch bricks
Head-to-Head Comparisons
Durablow CSA Certified vs Standard IPI Module
Both the Durablow CSA Certified module and the standard Durablow IPI module serve as electronic ignition controls for gas fireplaces. The CSA Certified version is explicitly marked as certified for 2023 and later, which may be a requirement for newer installations or specific local codes.
The standard module is made in Taiwan and serves as a direct replacement for similar OEM numbers. Both operate on 3V input and are compatible with a wide range of brands. The primary distinction is the certification status, which may influence compliance for certain projects.
WINTACK Flat Gasket vs Midwest Hearth Rope Kit
The WINTACK gasket is a flat, self-adhesive tape that is 5/8 inch wide and 1/8 inch thick. It is designed for quick installation on flat surfaces. In contrast, the Midwest Hearth kit includes a rope gasket that is 5/8 inch in diameter and 84 inches long, along with 2,000°F rated cement.
The rope style is often preferred for door channels where a flexible seal is needed, while the flat tape is suitable for flat joints. The Midwest Hearth kit provides a more comprehensive installation package with the included adhesive.
Thermopile Generator vs Remote Control Kit
The 24-inch thermopile generator is a core component that generates voltage to keep the gas valve open, operating at 700-750°C. The Durablow TR1003 remote control kit is an accessory that allows wireless control of the fireplace, operating within a 20-foot range. The thermopile is essential for the basic operation of a millivolt system, while the remote kit adds convenience and features like a thermostat and timer.
They serve different functions: one generates power, the other controls the signal.
Buying Guide
Identify Your Fuel Type
The first step in selecting a replacement part is determining whether your fireplace uses gas or wood. Gas fireplaces require electronic components like IPI modules and thermopiles, while wood stoves rely on physical parts like gaskets and firebricks. Using a gas part in a wood stove or vice versa will not work.
Check your owner's manual or the rating plate inside the fireplace to confirm the fuel type.
Verify Model Compatibility
Fireplace parts are often model-specific. For electronic modules, check the cross-reference numbers on your existing part. For physical parts like gaskets and bricks, measure the dimensions of your current components. The Midwest Hearth gasket, for example, is 5/8 inch in diameter, which must match your door channel.
Ensuring the correct size and model fit prevents installation issues and ensures safety.
Consider Installation Requirements
Some parts, like the Durablow IPI module, require installation by a qualified electrical technician. Others, like the WINTACK self-adhesive gasket, are designed for DIY installation. Before purchasing, assess your comfort level with the installation process. Electronic components involve wiring and safety checks, while physical seals may only require cleaning and applying adhesive.
Always follow the manufacturer's instructions for installation.
Check Temperature Ratings
Different parts are rated for different temperatures. The WINTACK gasket withstands 1100°F, while the Midwest Hearth cement is rated to 2,000°F. The vermiculite firebricks can handle 2200°F. Ensure the part you choose is rated for the operating temperature of your specific fireplace. Using a part with a lower temperature rating can lead to premature failure and safety hazards.
Frequently Asked Questions
Can I install an IPI module myself?
The Durablow IPI module listing states that it must be installed by a qualified electrical technician or service personnel. You should disconnect power before servicing and follow all safety guidelines. If you are not a qualified technician, it is recommended to hire a professional for installation.
What is the difference between a thermopile and a thermocouple?
The supplied data describes a millivolt thermopile generator, which produces sufficient voltage to keep the gas valve open. A thermocouple typically produces a smaller voltage for safety shutoff. The thermopile in this list is rated at 750 mv and operates at 700-750°C.
Are the firebricks suitable for outdoor use?
No, the vermiculite firebricks are not waterproof and the listing explicitly states they should not be used outdoors. They are designed for wood stoves and fireplaces in indoor environments where they can withstand high temperatures up to 2200°F.
Does the remote control kit include batteries?
No, the Durablow TR1003 remote control kit does not include batteries. The transmitter requires two 1.5V AAA batteries, and the receiver requires four AA batteries. The listing recommends using Energizer Lithium Batteries to prevent corrosion from leaks.
This article is part of our complete guide Home & Kitchen — browse all our comparisons and buying guides.
