Selecting the correct Flex-Hone requires matching the bore diameter and abrasive grit to your specific component. These tools are designed to be self-centering and self-aligning, allowing for consistent finishing in rotating spindles.
The listed options range from small 1 inch tools to large 4 inch models, with grits of 180 and 240. You must order by bore size to ensure the tool fits your cylinder or valve guide correctly.
Our 3 picks for different needs
Brush Research 14353 Automotive Flex-Hone Kit
Includes ten sizes from 10mm to 2 inches for handling various bore diameters.
Read the details
Brush Research GBD40024 Flex-Hone 4" 240 Grit
Heavy Duty series with 6 inch abrasive length for larger cylinders.
Read the details
Brush Research BC10018 Flex-Hone 1" 180 Grit
1 inch diameter with 180 grit for coarser finishing on smaller parts.
Read the detailsAll products, in detail
Brush Research GB41824 Flex-Hone 4-1/8" 240 Grit
This GB Standard Duty tool features a 4-1/8 inch bore diameter and 240 grit silicon carbide abrasive. It is designed for mild steel, stainless steel, and cast iron, achieving a 24-32 microinch finish. The oversized design ensures self-centering and self-aligning performance in rotating spindles. It is suitable for hydraulic cylinders, engine components, and pumps requiring a crosshatch finish.
- 4-1/8 inch (105mm) bore diameter
- 240 grit silicon carbide abrasive
Brush Research GB31224 Flex-Hone 3-1/2" 240 Grit
The GB31224 model offers a 3-1/2 inch bore diameter with 240 grit silicon carbide abrasive. It is manufactured to be self-centering and self-compensating for wear, making it easy to use in hand drills or drill presses. This tool is ideal for finishing and deburring in a single setup.
It works well on softer ferrous materials like mild steel and cast iron, producing a consistent crosshatch pattern.
- 3-1/2 inch (89mm) bore diameter
- Standard Duty GB series
Brush Research GB31424 Flex-Hone 3-1/4" 240 Grit
This 3-1/4 inch Flex-Hone uses 240 grit silicon carbide to finish mild steel, stainless steel, and cast iron. The engineered oversize creates optimal pressure inside the cylinder wall for self-aligning operation. It is designed for use in virtually any rotating spindle, including CNC equipment. The tool achieves a 24-32 microinch finish, suitable for rebuilding hydraulic and pneumatic cylinders.
- 3-1/4 inch (83mm) bore diameter
- 240 grit silicon carbide abrasive
Brush Research 14353 Automotive Flex-Hone Kit
This kit includes ten popular automotive sizes ranging from 10mm to 2 inches, all in 180 grit silicon carbide. It is designed for mild steel, stainless steel, and cast iron materials. The self-centering design allows for easy use in rotating spindles. This multi-size pack is ideal for shops that need to handle various bore diameters without purchasing individual tools for each size.
- Includes 10 sizes from 10mm to 2 inches
- 180 grit silicon carbide abrasive
Brush Research BC10018 Flex-Hone 1" 180 Grit
The BC10018 is a 1 inch bore diameter tool with 180 grit silicon carbide abrasive. It is a Standard Duty model designed for mild steel, stainless steel, and cast iron. The tool achieves a 30-40 microinch finish, which is coarser than the 240 grit options.
It is suitable for deburring and finishing in a single setup using a hand drill or drill press.
- 1 inch (25.4mm) bore diameter
- 180 grit silicon carbide abrasive
Brush Research BC7824 Flex-Hone 7/8" 240 Grit
This 7/8 inch Flex-Hone features 240 grit silicon carbide abrasive for finishing mild steel, stainless steel, and cast iron. It is a Standard Duty tool with a 3 inch abrasive part length. The self-centering design ensures consistent pressure on the cylinder wall. It is ideal for valve guides, pumps, and smaller engine components requiring a 24-32 microinch finish.
- 7/8 inch (22.2mm) bore diameter
- 240 grit silicon carbide abrasive
Brush Research GBD40024 Flex-Hone 4" 240 Grit
The GBD40024 is a Heavy Duty Flex-Hone with a 4 inch bore diameter and 240 grit silicon carbide abrasive. It features a 6 inch abrasive part length, providing more contact area than Standard Duty models. It is designed for heavy-duty applications like hydraulic cylinders and compressors.
The tool is self-centering and self-aligning, suitable for use in rotating spindles.
- 4 inch (101mm) bore diameter
- Heavy Duty GBD series
Brush Research BC30024 Flex-Hone 3" 240 Grit
This 3 inch Flex-Hone uses 240 grit silicon carbide to finish mild steel, stainless steel, and cast iron. It is a Standard Duty model with a 3 inch abrasive part length. The tool is designed to be self-centering and self-compensating for wear. It is suitable for finishing and deburring in a single setup, achieving a 24-32 microinch finish on various ferrous materials.
- 3 inch (76.2mm) bore diameter
- 240 grit silicon carbide abrasive
Head-to-Head Comparisons
GB41824 vs GBD40024: Standard vs Heavy Duty
Both tools feature 240 grit silicon carbide and similar bore diameters around 4 inches. The GB41824 is a Standard Duty model with a 4 inch abrasive length, while the GBD40024 is a Heavy Duty model with a 6 inch abrasive length. The Heavy Duty version provides more contact area, which may be preferred for larger or more demanding cylinder rebuilds.
The Standard Duty version is suitable for general finishing tasks where the shorter abrasive length is sufficient.
BC10018 vs BC7824: Grit and Size Differences
The BC10018 is a 1 inch tool with 180 grit abrasive, while the BC7824 is a 7/8 inch tool with 240 grit abrasive. The 180 grit on the BC10018 achieves a coarser 30-40 microinch finish, suitable for initial deburring. The 240 grit on the BC7824 achieves a finer 24-32 microinch finish.
Choose the BC10018 for larger 1 inch bores needing coarser work, or the BC7824 for smaller 7/8 inch bores needing finer finishing.
GB31224 vs GB31424: Bore Diameter Selection
These two tools are nearly identical in grit and duty level, both using 240 grit silicon carbide in the Standard Duty GB series. The primary difference is the bore diameter: the GB31224 is 3-1/2 inches, while the GB31424 is 3-1/4 inches. You must measure your specific bore to determine which size fits.
The GB31224 covers bores between 3.251 and 3.500 inches, while the GB31424 covers bores between 3.001 and 3.250 inches.
Buying Guide
Measure Bore Diameter First
Flex-Hones are ordered by bore size, not the tool's outer diameter. Measure the internal diameter of your cylinder or valve guide to select the correct tool. Each tool covers a specific range of bore sizes, so an incorrect measurement will result in a tool that does not fit or does not make proper contact with the wall.
Select Grit for Finish
The grit determines the final surface finish. 180 grit achieves a 30-40 microinch finish, which is coarser and suitable for deburring. 240 grit achieves a 24-32 microinch finish, which is finer and suitable for final finishing. Choose the grit based on the tolerance required for your specific application, such as hydraulic seals or engine components.
Choose Duty Level
Standard Duty tools are suitable for general finishing and deburring tasks. Heavy Duty tools feature a longer abrasive part length, providing more contact area for larger or more demanding applications. If you are working on large hydraulic cylinders or compressors, a Heavy Duty model may be more appropriate than a Standard Duty model of the same bore size.
Consider Kit Options
If you work with various bore sizes, an automotive kit may be more convenient than purchasing individual tools. The listed kit includes ten sizes from 10mm to 2 inches. This is useful for shops that need to handle multiple small components without buying each size separately.
Check the specific sizes included to ensure they match your common work.
Frequently Asked Questions
What materials can Flex-Hones be used on?
These tools are designed for mild steel, stainless steel, cast iron, and other softer ferrous materials. The silicon carbide abrasive is effective on these metals, providing a consistent crosshatch finish. They are not intended for non-ferrous metals or hard ceramics.
How do I know which size to buy?
Measure the internal bore diameter of the component you are finishing. Each Flex-Hone is labeled with a specific bore diameter and covers a range of sizes. Order the tool that matches your measured bore size to ensure proper fit and contact.
Can I use a Flex-Hone in a hand drill?
Yes, the tools are designed to be used in virtually any rotating spindle, including hand drills, drill presses, and CNC equipment. The self-centering design allows the tool to align itself within the bore, making it easy to use with standard power tools.
What is the difference between Standard and Heavy Duty?
Standard Duty tools have a shorter abrasive part length, typically 3 to 4 inches. Heavy Duty tools have a longer abrasive part length, such as 6 inches. The longer length provides more contact area, which is useful for larger or more demanding finishing tasks.
This article is part of our complete guide Tools & Home Improvement — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
