Industrial & Scientific

Gage Blocks: 7 Precision Calibration Sets Compared

This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.

Product details come from Amazon listings. Compare the specifications that matter to you, and check the current price and availability on Amazon before buying. How we compare

Selecting the right gage blocks depends on your specific metrology needs, whether you require high-grade standards for calibration or functional blocks for fixture building. The sets in this comparison vary significantly in grade, material composition, and intended application.

Some options are designed for precise micrometer verification, while others offer comprehensive 81-piece sets for general dimensional measurement. Understanding the differences in accuracy grades and surface finishes will help you choose the correct standard for your inspection room or machine shop.

AT A GLANCE

Our 3 picks for different needs

Mitutoyo-516-935-26 Steel Rectangular Micrometer Inspection Gage Block Set, ASME Grade AS...
07Micrometer Calibration

Mitutoyo 9-Block AS-1 Set

The Mitutoyo AS-1 set is used for checking spindle wear and accuracy, ensuring proper calibration of micrometers with thermally stabilized steel.

Read the details
WEN 10423 3 x 2 x 1-Inch Steel-Hardened Precision 123 Blocks, Two Pack
03Fixture Spacing

WEN 1-2-3 Blocks Two Pack

Amazon Prime

The WEN 1-2-3 blocks feature threaded holes that allow them to be used for spacing workpieces and calibrating equipment.

Read the details
HFS 81 PC Gauge Block Set Economy Grade Calibration NIST-Traceable
06General Inspection

HFS 81-Piece Economy Grade Set

The HFS 81-piece set offers NIST-traceable economy grade blocks suitable for routine dimensional inspection and machine setup.

Read the details

All products, in detail

Accusize Industrial Tools Precision 81-Piece Steel Gauge Block Set, Grade B Accuracy...
01

Accusize 81-Piece Grade B Steel Set

This 81-piece set is manufactured to Grade B accuracy and meets or exceeds federal specification ASME B89.1.9-2002. The blocks are hardened to HRC 64 and made to a special standard to resist corrosion and defacement. Each set includes a certificate of inspection listing the deviation for every block.

It is a solid choice for shops requiring a comprehensive inch set with documented traceability and high durability for repeated wringing and stacking tasks.

  • Meets or exceeds ASME B89.1.9-2002
  • Hardened to HRC 64
Shars Grade AS-2 Rectangular Gage Block Set, 81 Pieces
02

Shars 81-Piece Grade AS-2 Set

The Shars 81-piece set is designated as Grade AS-2, indicating a specific level of precision for rectangular gage blocks. While the listing provides the grade and piece count, it does not detail the specific material hardness or calibration traceability in the provided text. This set is suitable for buyers who specifically require the AS-2 grade specification for their metrology standards.

It offers a full 81-piece configuration for versatile dimensional measurement and setup work in professional environments.

  • Grade AS-2 specification
  • 81-piece rectangular set
WEN 10423 3 x 2 x 1-Inch Steel-Hardened Precision 123 Blocks, Two Pack
03Fixture Spacing

WEN 1-2-3 Blocks Two Pack

Amazon Prime

Unlike standard rectangular gage blocks, this WEN set includes two 1-2-3 blocks, each measuring 3 by 2 by 1 inches. They feature five threaded 3/8-16 UNC cross-drilled holes, making them ideal for clamping, spacing, and fixture building rather than just dimensional calibration. These blocks are perfect for machinists, woodworkers, and metalworkers who need to space workpieces or calibrate equipment using threaded mounting points.

This is a functional tool for setup and alignment rather than a high-precision measurement standard.

  • Includes two 1-2-3 blocks
  • Features 5 threaded 3/8-16 UNC holes
TEXALAN(R) Gauge Block Set Gage Blocks Grade Economy Rectangular for Precision Calibration (81 PCS)
04

TEXALAN 81-Piece Economy Grade Set

This TEXALAN set is forged from fully seasoned tool steel and hardened to 65 RC for strong wear resistance. It offers an economy tolerance of +/- 0.000050 inches, making it suitable for general dimensional measurement and machine calibration. The blocks have ground surfaces ideal for accurate wringing and are laser-etched with serial numbers.

A traceable calibration certificate is included, providing a cost-effective option for shops that need a full 81-piece set for routine inspection and tool verification tasks.

  • Economy tolerance of +/- 0.000050"
  • Hardened to 65 RC
Shars Rectangular Gage Block Set 303-5307C M)
05

Shars 303-5307C Rectangular Set

The Shars 303-5307C set is made from fully seasoned alloy tool steel hardened to 65 RC to resist wear and rust. The measuring surfaces are ground and micro-lapped to a mirror finish to ensure the blocks are wringable. Accuracy is specified at +/- 6 millionths for blocks under 1 inch when used at 68 degrees Fahrenheit.

The set includes a calibration certificate traceable to NIST, making it a reliable choice for precision metrology and inspection work where surface finish and traceability are critical.

  • Micro-lapped mirror finish
  • NIST-traceable calibration certificate
HFS 81 PC Gauge Block Set Economy Grade Calibration NIST-Traceable
06General Inspection

HFS 81-Piece Economy Grade Set

This HFS set covers the range from .050" to 4.000" and is crafted from fully seasoned alloy tool steel hardened to 65 HRC. It meets ASME B89.1.9-2023 requirements and includes a certificate of calibration traceable to NIST. The economy accuracy tolerance is +/- 0.000050 inches.

Each block is individually serialized with its deviation documented, providing clear identification for quality control. It is well-suited for machine setup, micrometer verification, and general metrology applications in industrial settings.

  • Meets ASME B89.1.9-2023
  • NIST-traceable calibration
Mitutoyo-516-935-26 Steel Rectangular Micrometer Inspection Gage Block Set, ASME Grade AS...
07Micrometer Calibration

Mitutoyo 9-Block AS-1 Set

This Mitutoyo set contains 9 blocks ranging from 0.0625" to 2.0" and is designated ASME Grade AS-1. The blocks are made from high-carbon, high-chrome steel and are thermally stabilized to minimize size changes due to temperature fluctuations. Each block is laser-etched with a unique serial number for traceability.

This compact set is specifically designed for micrometer calibration, allowing users to check spindle wear and accuracy in professional metrology environments where high-grade standards are required.

  • ASME Grade AS-1
  • Thermally stabilized high-carbon steel

Head-to-Head Comparisons

Accusize Grade B vs HFS Economy Grade

The Accusize set is manufactured to Grade B accuracy, which is a higher precision standard than the Economy grade found in the HFS set. Both sets are 81-piece configurations made from hardened steel, but the Accusize blocks are hardened to HRC 64 while the HFS blocks are hardened to 65 HRC.

The HFS set explicitly cites compliance with ASME B89.1.9-2023 and NIST traceability, whereas the Accusize set cites ASME B89.1.9-2002. If your facility requires the higher precision of Grade B for critical measurements, the Accusize set is the appropriate choice. For general inspection and setup where economy tolerance is sufficient, the HFS set provides a robust alternative with modern traceability documentation.

Mitutoyo AS-1 vs Shars 303-5307C

The Mitutoyo set is a 9-block configuration designated ASME Grade AS-1, specifically marketed for micrometer calibration. In contrast, the Shars 303-5307C is a larger set with a mirror-lapped finish and NIST-traceable certification. The Mitutoyo blocks are thermally stabilized high-carbon steel, which is a key feature for maintaining accuracy in varying workshop temperatures.

The Shars blocks are alloy tool steel hardened to 65 RC. If your primary goal is checking micrometer spindle wear, the Mitutoyo AS-1 set is purpose-built for that task. If you need a broader range of blocks for general dimensional inspection with a focus on surface finish for wringing, the Shars set offers a different utility profile.

WEN 1-2-3 Blocks vs TEXALAN 81-Piece Set

These two products serve fundamentally different purposes. The WEN 1-2-3 blocks are functional tools with threaded holes, designed for clamping, spacing, and fixture building. They are not standard rectangular gage blocks for dimensional calibration. The TEXALAN set, however, is a traditional 81-piece rectangular gage block set with economy tolerance and ground surfaces for wringing.

A buyer should choose the WEN blocks if they need to space workpieces or build jigs. A buyer should choose the TEXALAN set if they need to perform dimensional measurement, machine calibration, or tool inspection using standard gage block stacking techniques.

Buying Guide

Understanding Accuracy Grades

Gage blocks are classified by accuracy grades, such as Grade B, Grade AS-1, and Economy grade. Grade B and AS-1 represent higher precision levels suitable for calibrating other instruments like micrometers and calipers. Economy grade blocks have a larger tolerance, typically around +/- 0.000050 inches, making them suitable for general setup and inspection but not for high-precision calibration.

Always verify the grade specified in the product listing to ensure it meets your facility's quality control requirements.

Material and Hardness

The material and hardness of the blocks affect their durability and resistance to wear. Most sets in this comparison are made from alloy or tool steel, hardened to between 64 and 65 HRC. This hardness ensures the blocks resist abrasion and maintain their dimensional stability over time.

Some sets, like the Mitutoyo, use high-carbon, high-chrome steel and are thermally stabilized to minimize expansion and contraction. Checking the hardness rating helps you predict how long the blocks will last under frequent use.

Traceability and Certification

For professional metrology, traceability to a national standard like NIST is often required. Several sets in this comparison, including the HFS and Shars models, include certificates of calibration traceable to NIST. This documentation is essential for quality control audits and ensuring that your measurements are consistent with international standards.

If your shop is subject to ISO or ASME compliance requirements, selecting a set with a NIST-traceable certificate is a critical step in maintaining your accreditation.

Set Configuration and Range

The number of blocks and their size range determine the versatility of the set. An 81-piece set typically covers a wide range of dimensions, from small fractions of an inch to several inches, allowing for complex stacking to achieve specific measurements. Smaller sets, like the 9-block Mitutoyo set, are specialized for specific tasks like micrometer calibration.

Consider the range of measurements you need to perform regularly to determine if a full 81-piece set or a specialized smaller set is the right fit for your workflow.

Frequently Asked Questions

What is the difference between Grade B and Economy grade gage blocks?

Grade B blocks have a tighter tolerance and are used for calibrating other measuring instruments. Economy grade blocks have a looser tolerance, typically +/- 0.000050 inches, and are used for general setup and inspection where high precision is not critical.

Do I need NIST-traceable gage blocks for my machine shop?

If your shop is subject to quality control audits or ISO compliance, NIST-traceable blocks are often required. They provide documented proof that your measurement standards are accurate and consistent with national standards, which is essential for maintaining accreditation.

Can I use 1-2-3 blocks for dimensional calibration?

The WEN 1-2-3 blocks are designed for spacing workpieces, calibrating equipment, and collecting exact measurements. They are distinct from standard rectangular gage blocks used for high-precision dimensional calibration, so their suitability depends on whether you need functional spacing or precise measurement standards.

How do I maintain the accuracy of my gage blocks?

Store gage blocks in a clean, dry environment and handle them by their edges to avoid oil and dirt on the measuring surfaces. Use a clean cloth to wipe them before and after use. Regular inspection and calibration according to your facility's schedule will help maintain their accuracy over time.

Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API

Was this article helpful?

Thanks for your feedback!

Thanks — we'll work to improve this article.

Kylan Shields

Kylan Shields

Kylan Shields is the editorial byline of Tossions. Comparisons published under this name are compiled from Amazon listing data (specifications, customer ratings and availability), not from hands-on testing.