Selecting the right drill bit set depends on the materials you plan to drill and the tools you already own. The six options listed here vary significantly in shank type, material composition, and size range. Some sets are designed for quick-change chucks, while others use standard round shanks.
You should consider whether you need to drill into soft materials like wood and plastic or harder metals like stainless steel. The length of the bit also matters if you are working on deep holes. Reviewing these specific features will help you match a set to your project requirements.
Our pick: NEIKO 10047A Extra Long Drill Bit Set. The 12-inch length provides added stability for deep holes in metal, wood, and plastic.
Our 3 picks for different needs
NEIKO 10047A Extra Long Drill Bit Set
The 12-inch length provides added stability for deep holes in metal, wood, and plastic.
Read the details
MACXCOIP 13Pcs Cobalt Drill Bit Set M35
M35 cobalt construction is specifically suited for cutting stainless steel and other hard metals.
Read the details
WORKPRO 9-Piece Titanium HSS Drill Bit Set
The 1/4-inch hex shank allows for quick changes in power screwdrivers and impact drivers.
Read the detailsAll products, in detail
NEIKO 10047A Extra Long Drill Bit Set
This five-piece set features 12-inch long bits made from heat-treated M2 high-speed steel. The extended length provides stability for deep drilling operations. It includes standard sizes from 1/8-inch to 3/8-inch. The sharp pointed tips are designed for smooth drilling in metal, wood, plastic, and PVC.
This set is suitable for buyers who need to reach deep into materials where standard bits might lack stability.
- Made from heat-treated M2 high-speed steel
- Includes five 12-inch bits in sizes 1/8 to 3/8 inch
WORKPRO 9-Piece Titanium HSS Drill Bit Set
This nine-piece set uses high-speed steel with titanium plating and a 135-degree split point tip. It covers sizes from 1/16-inch to 3/8-inch with a 1/4-inch hex shank. The design is compatible with power screwdrivers and impact drivers. It is suitable for wood, PVC, copper, aluminum, and stainless steel, but not for masonry.
This option fits users who need quick-change capability in compact power tools.
- Features 1/4-inch hex shank for quick change
- Titanium-plated HSS with 135-degree split point
8 Pack Titanium Coated HSS Twist Drill Bits
This eight-piece set includes metric sizes from 3mm to 10mm with hexagonal shanks. The bits feature a fully ground spiral flute design and serrated side cutting edges. The titanium coating is intended to extend the life of the cutting edge. It is designed for sheet metal, wood, aluminum, plastic, and drywall.
This set is a good fit for users who prefer metric sizing and need versatile cutting for various materials.
- Includes eight metric sizes from 3mm to 10mm
- Features serrated side cutting edges and hex shank
COMOWARE Titanium Twist Drill Bit Set 16 Pcs
This sixteen-piece set covers sizes from 1/16-inch to 1/4-inch with a 1/4-inch hex shank. The bits use HSS construction with titanium coating and staggered cutting teeth. The two-flute design helps clear chips and reduce heat. It includes an organized holder with size indexes. This set is suitable for home DIY and general building use, offering a wide range of small sizes for precise work.
- Includes 16 bits ranging from 1/16 to 1/4 inch
- Comes with an organized holder with size index
MACXCOIP 13Pcs Cobalt Drill Bit Set M35
This thirteen-piece set features M35 cobalt drill bits in jobber length. Sizes range from 1/16-inch to 1/4-inch. The 135-degree point tip aids in self-centering and faster cutting. The set is designed for stainless steel, iron castings, copper, aluminum, and plastics. It includes a drill case with size indexes for storage.
This option is ideal for users who frequently drill into harder metals like stainless steel.
- Made from M35 cobalt for hard metal drilling
- Includes 13 bits from 1/16 to 1/4 inch
DEWALT Drill Bit Set, 3-Flats Shank, 14-Piece
This fourteen-piece set features high-speed steel bits with a black and gold coating. The 135-degree split point tip helps reduce walking. The 3-flats shank design is intended to reduce spin-out in the chuck for sizes larger than 3/16-inch. It is suitable for plastic, wood, and metal.
This set is a good choice for users who prioritize durability and anti-rust protection in their drilling tools.
- Features 3-flats shank to reduce spin-out
- Includes 14 bits with black and gold coating
Head-to-Head Comparisons
WORKPRO vs COMOWARE: Hex Shank Size Range
Both the WORKPRO and COMOWARE sets use 1/4-inch hex shanks for quick-change compatibility. However, they differ in the number of bits and the maximum size included. The WORKPRO set includes nine bits ranging up to 3/8-inch, while the COMOWARE set includes sixteen bits but only up to 1/4-inch.
If you need to drill larger holes, the WORKPRO set offers a wider size range. If you prefer having more small sizes for precision work, the COMOWARE set provides a greater quantity of bits in the smaller range.
MACXCOIP vs DEWALT: Material and Shank Design
The MACXCOIP set uses M35 cobalt steel, which is specifically marketed for cutting stainless steel and hard metals. The DEWALT set uses high-speed steel with a black and gold coating, suitable for general plastic, wood, and metal drilling. Additionally, the DEWALT bits feature a 3-flats shank to reduce spin-out, whereas the MACXCOIP listing does not specify the shank type.
Choose MACXCOIP if your primary focus is drilling into stainless steel. Choose DEWALT if you need a general-purpose set with anti-spin features for mixed materials.
NEIKO vs 8 Pack: Length and Metric Sizing
The NEIKO set features extra-long 12-inch bits, which provide stability for deep drilling. The NEIKO bits are made from M2 high-speed steel, while the 8 Pack bits are titanium-coated HSS with serrated side cutting edges. If you are working on deep holes in imperial-sized materials, the NEIKO set is the appropriate choice.
If you prefer metric sizes and need versatile cutting for sheet metal and drywall, the 8 Pack set is a better fit.
Buying Guide
Shank Type Compatibility
Check the shank type of your drill or impact driver before purchasing. Hex shank bits, like those in the WORKPRO and COMOWARE sets, fit into quick-change chucks. The DEWALT set features a 3-flats shank, while the NEIKO and MACXCOIP listings do not specify their shank types.
Matching the shank to your tool ensures secure holding and prevents slippage during operation.
Material Suitability
Identify the primary material you will be drilling. Cobalt bits, such as the MACXCOIP set, are designed for hard metals like stainless steel. High-speed steel bits with titanium coating, like the WORKPRO and 8 Pack sets, are suitable for a variety of materials including wood, plastic, and softer metals.
Always verify that the bit material is compatible with your target material to avoid premature wear.
Size Range and Quantity
Consider the range of hole sizes you need to drill. Some sets, like the COMOWARE, offer many small sizes for precision work. Others, like the WORKPRO, include larger sizes up to 3/8-inch. If you are a general DIYer, a set with a wide range of common sizes may be more useful than a set with many small increments.
Check the specific sizes included in each set to ensure they match your project needs.
Bit Length and Stability
Standard jobber length bits are sufficient for most surface drilling. However, if you need to drill deep holes, extra-long bits like the NEIKO 12-inch set provide better stability and reduce the risk of the bit bending or breaking. For shallow holes, standard length bits are easier to store and handle.
Choose the length based on the depth of the holes you typically need to drill.
Frequently Asked Questions
Can I use hex shank bits in a standard drill?
Hex shank bits are designed for quick-change chucks found in impact drivers and some cordless drills. They may not fit securely in a standard keyed or keyless chuck that requires a round shank. Check your tool's specifications to ensure compatibility before purchasing.
What is the difference between HSS and cobalt drill bits?
High-speed steel (HSS) bits are suitable for general drilling in wood, plastic, and softer metals. Cobalt bits, like the M35 variety, are harder and more durable, making them better suited for drilling into stainless steel and other hard alloys. Cobalt bits generally cost more but last longer on hard materials.
Do titanium-coated bits last longer than uncoated bits?
Titanium coating is intended to reduce friction and heat, which can extend the life of the cutting edge. The 8 Pack set claims the coating extends life by two times. While coating helps with durability, the underlying steel quality and proper usage are also critical factors in how long a bit will last.
Are these drill bits suitable for masonry?
No, the sets listed here are designed for metal, wood, and plastic. The WORKPRO set explicitly states it cannot be used for masonry construction materials. For drilling into concrete or brick, you need masonry-specific bits with carbide tips, which are not included in these sets.
This article is part of our complete guide Tools & Home Improvement — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
