Selecting the right inductive proximity sensor depends on matching the output type, detection distance, and voltage range to your specific control system. These sensors detect metal objects without physical contact, making them ideal for counting, positioning, and safety interlocks in industrial environments.
The eight options in this comparison vary in their electrical configurations, ranging from NPN to PNP outputs and normally open to normally closed states. They also differ in detection distance, from 2mm to 5mm, and are sold in packs of one to five units. Understanding these distinctions helps you choose a sensor that integrates seamlessly with your existing hardware.
Our 3 picks for different needs
Haldzemo SN04-N NPN NO 4mm Sensor with Bracket (4 Pack)
The Haldzemo SN04-N includes mounting brackets and an LED indicator, which simplifies installation and debugging for DIY projects.
Read the details
Twidec LJ12A3-4-Z/BY PNP NO 4mm Sensor (1 Pack)
The Twidec LJ12A3-4-Z/BY features a PNP output, making it suitable for controllers that require a source-type signal.
Read the details
LJ8A3-2-Z/BX NPN NO 2mm Sensor (5 Pack)
The LJ8A3-2-Z/BX has a 2mm detection distance, which is useful for applications requiring very close-range sensing.
Read the detailsAll products, in detail
Haldzemo LJ12A3-4-Z/BX NPN NO 4mm Sensor (4 Pack)
This four-pack of Haldzemo sensors uses the LJ12A3-4-Z/BX model with a 12mm diameter and 4mm detection distance. It features a 3-wire NPN normally open output and operates on 6-36VDC. The listing specifies a 300mA current output and 500Hz frequency. This configuration is suitable for machine tools and light industry applications where a standard NPN signal is required for counting or positioning.
- 12mm diameter with 4mm detection distance
- NPN normally open output with 300mA current
Haldzemo SN04-N NPN NO 4mm Sensor with Bracket (4 Pack)
The Haldzemo SN04-N sensor is a 3-wire NPN normally open switch with a 4mm detection distance. It operates on a 5-30VDC supply and includes an LED working indicator that lights up when sensing metal objects. Each pack includes four sensors and four SN brackets for mounting.
This kit is useful for DIY 3D printers and automatic control systems where visual confirmation of the signal state is helpful during setup.
- Includes 4 sensors and 4 mounting brackets
- Features an LED indicator for signal status
LJ8A3-2-Z/BX NPN NO 2mm Sensor (5 Pack)
This five-pack of LJ8A3-2-Z/BX sensors is a compact 3-wire NPN normally open switch. It has a 2mm detection distance and operates on 6-36VDC. The smaller detection range makes it suitable for applications requiring precise, close-range detection of iron objects. The package includes five units, allowing for multi-point sensing setups in machine tools or other industrial environments.
- 2mm detection distance for close-range sensing
- NPN normally open output with 3-wire connection
Taiss LJ12A3-4-Z/AX NPN NC 4mm Sensor (2 Pack)
The Taiss LJ12A3-4-Z/AX is a 2-pack of inductive proximity switches with a 12mm thread diameter and 4mm detection distance. It uses a 3-wire NPN normally closed output and operates on 6-36VDC. The listing notes a 300mA output current and a 1.16m cable length. This normally closed configuration is useful for safety circuits or applications where the signal should be active until an object is detected.
- NPN normally closed output type
- 12mm thread diameter with 1.16m cable
Twidec LJ12A3-4-Z/BY PNP NO 4mm Sensor (1 Pack)
This single Twidec sensor uses the LJ12A3-4-Z/BY model with a 12mm column diameter and 4mm detection distance. It features a 3-wire PNP normally open output and operates on 6-36VDC. The listing specifies a 300mA current output and a 1.2m cable length. This PNP configuration is compatible with controllers that require a source-type signal, making it a distinct option from the NPN models in this comparison.
- PNP normally open output type
- 12mm column diameter with 1.2m cable
LJ8A3-2-Z/BY PNP NO 2mm Sensor (5 Pack)
This five-pack of LJ8A3-2-Z/BY sensors is a 3-wire PNP normally open switch with a 2mm detection distance. It operates on 6-36VDC and is designed to detect iron objects. The compact size and short detection range are suitable for tight spaces where precise, close-range sensing is needed.
The PNP output type distinguishes it from the NPN variants, catering to different controller input requirements.
- PNP normally open output type
- 2mm detection distance for precise sensing
Comimark TL-W5MC1 5mm NPN Sensor (3 Pack)
The Comimark TL-W5MC1 is a 3-pack of 5mm inductive proximity sensors. It is a 3-wire NPN switch that operates on 6-36VDC. The 5mm detection distance offers a slightly longer range than the 2mm and 4mm models, which may be beneficial for applications where the sensor cannot be mounted extremely close to the target.
The listing does not specify the output type as normally open or closed in the detailed features, so buyers should verify the specific wiring configuration for their controller.
- 5mm detection distance
- 3-wire NPN output with 6-36VDC supply
Lzcdelyxiao LJ12A3-4-Z/BY PNP NO 4mm Sensor (5 Pack)
This five-pack of Lzcdelyxiao sensors uses the LJ12A3-4-Z/BY model with a 4mm detection distance. It is a 3-wire PNP normally open switch operating on 6-36VDC. The listing specifies detection of iron objects. This bulk pack is useful for projects requiring multiple PNP sensors, such as conveyor systems or multi-axis positioning, where a source-type output is required for the control system.
- PNP normally open output type
- 4mm detection distance with 6-36VDC supply
Head-to-Head Comparisons
Haldzemo NPN vs Twidec PNP: Output Type Choice
The Haldzemo LJ12A3-4-Z/BX and the Twidec LJ12A3-4-Z/BY both feature a 4mm detection distance and 12mm diameter, but they differ in output type. The Haldzemo model is NPN, meaning it sinks current, while the Twidec model is PNP, meaning it sources current. This distinction is critical for compatibility with your controller.
If your PLC or microcontroller expects a sink-type input, the Haldzemo NPN sensor is the appropriate choice. Conversely, if your system requires a source-type input, the Twidec PNP sensor will be the correct fit. Both operate on 6-36VDC, so voltage is not a differentiating factor here.
LJ8A3 2mm vs Taiss LJ12A3 4mm: Detection Range
The LJ8A3-2-Z/BX and the Taiss LJ12A3-4-Z/AX differ primarily in their detection distance and physical size. The LJ8A3 model has a 2mm detection distance, making it suitable for applications where the sensor must be mounted very close to the target. The Taiss model has a 4mm detection distance, offering a slightly larger sensing zone.
The Taiss sensor also has a 12mm thread diameter, while the LJ8A3 is smaller. If your application requires precise, close-range detection, the 2mm LJ8A3 is the better choice. If you need a bit more tolerance in the sensor-to-target distance, the 4mm Taiss sensor may be more practical.
Haldzemo SN04-N vs LJ12A3: Mounting and Indicators
Both Haldzemo options are NPN normally open sensors with a 4mm detection distance, but they differ in physical form and included accessories. The SN04-N model includes an LED working indicator and comes with mounting brackets, which can simplify installation and troubleshooting. The LJ12A3-4-Z/BX model is a standard cylindrical sensor without a specified LED indicator or brackets in the listing.
If you are setting up a new system and want visual confirmation of the signal state, the SN04-N with its LED and brackets is a convenient choice. If you already have a mounting solution and do not require an indicator, the LJ12A3 is a straightforward option.
Buying Guide
Choosing Between NPN and PNP Outputs
The output type of an inductive proximity sensor must match the input type of your controller. NPN sensors sink current, meaning the output wire goes low when an object is detected. PNP sensors source current, meaning the output wire goes high when an object is detected.
Check your PLC, microcontroller, or relay input specifications to determine which type is required. Mismatching the output type can prevent the sensor from functioning correctly or damage the controller. This is the most critical compatibility factor to verify before purchasing.
Understanding Detection Distance and Tolerance
The detection distance is the maximum distance at which the sensor can reliably detect a target object. Most sensors in this comparison have a nominal detection distance of 2mm, 4mm, or 5mm, with a tolerance of +/-10%. This means the actual detection distance can vary slightly.
When mounting the sensor, ensure that the target object is within the nominal detection distance and that there is sufficient clearance to account for the tolerance. A shorter detection distance, such as 2mm, requires more precise mounting but offers better resolution for close-range applications.
Normally Open vs Normally Closed States
The state of the sensor output when no object is present is defined as normally open (NO) or normally closed (NC). In a normally open configuration, the output is inactive until an object is detected. In a normally closed configuration, the output is active until an object is detected.
The choice between NO and NC depends on your application logic. For example, a safety interlock might use a normally closed sensor so that the circuit is broken if the sensor fails or is removed. Review your control logic to determine which state is appropriate.
Voltage Range and Current Output
All sensors in this comparison operate on a DC voltage range of 6-36V, with the exception of the Haldzemo SN04-N, which operates on 5-30V. Ensure that your power supply falls within the specified range for the sensor you choose. The current output is typically 300mA for these sensors, which is sufficient for driving most relays and controller inputs.
If you are using a power supply with a different voltage range, verify that it is compatible with the sensor's specifications to ensure reliable operation and prevent damage.
Frequently Asked Questions
What is the difference between NPN and PNP sensors?
NPN sensors sink current, while PNP sensors source current. The choice depends on your controller's input type. Check your PLC or microcontroller specifications to determine which output type is required for compatibility.
Can I use these sensors with AC power?
No, all sensors in this comparison are designed for DC power supplies. They operate on DC voltages ranging from 5-30V or 6-36V. Do not connect them to AC power sources, as this will damage the sensors.
What materials can these sensors detect?
These inductive proximity sensors are designed to detect ferrous metals, such as iron. They may not reliably detect non-ferrous metals like aluminum or copper, or non-metallic materials. Verify the target material for your specific application.
How many sensors do I need for my project?
The number of sensors required depends on your specific application. Some packs include one, two, four, or five sensors. Determine how many detection points you need in your system and choose a pack size that meets or exceeds that requirement.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-20 / Affiliate links / Images from Amazon Product Advertising API
