Selecting the right industrial memory EEPROM depends on your specific storage needs, interface requirements, and physical constraints. This comparison covers seven options, ranging from compact I2C modules to parallel interface chips.
Each product serves a different purpose, from high-capacity data logging to basic configuration storage. By understanding the differences in capacity, package type, and voltage compatibility, you can choose the component that best fits your project.
Our 3 picks for different needs
MusRock AT24C32 EEPROM Module 10-Pack
The MusRock AT24C32 modules operate from 1.8V to 5.5V, making them suitable for mixed-voltage systems.
Read the details
Interstellar Electronics EEPROM Chip Assortment
The Interstellar Electronics assortment provides six different chip types, allowing testing of various storage sizes.
Read the details
W27C512 Parallel EEPROM IC
The W27C512 IC uses a parallel interface, which is distinct from the I2C modules listed here.
Read the detailsAll products, in detail
Ferwooh AT24C256 EEPROM Module
This 3-pack module features an onboard 8-pin chip carrier specifically for AT24C256 series chips. It includes a power display LED and built-in pull-up resistors for I2C communication. All pins are lead out and marked, with direct jumper settings for the write-protect pin. The compact PCB measures 36.5 x 12 x 12 mm.
It is suitable for engineers needing a ready-to-use interface for high-capacity serial memory in data storage applications.
- Includes 3 modules with onboard 8P chip carrier
- PCB size is 36.5 x 12 x 12 mm
Interstellar Electronics EEPROM Chip Assortment
This assortment contains 60 SMD SOP-8 EEPROM chips across six different types. It includes 10 pieces each of 24C02, 24C04, 24C08, 24C16, 24C32, and 24C64 models. The capacities range from 256B to 8MB. This kit is ideal for developers who need a variety of memory sizes for prototyping or production runs.
The SMD package requires surface-mount soldering capabilities. It provides a broad range of storage options in a single package.
- 60 chips total, 10 of each of 6 types
- Capacities range from 256B to 8MB
DAOKAI AT24C256 EEPROM Module 5-Pack
This 5-pack of AT24C256 modules is designed for Arduino and high-capacity data acquisition systems. Each module operates from -55°C to 125°C and uses a 2.54mm pin pitch. It features an onboard pull-up resistor and marked pins for address input and write protection. The package includes a 20-pin female to male Dupont cable for easy connection.
The 256k bit capacity supports large data logging tasks. It is a practical choice for hobbyists and industrial developers alike.
- Operating temperature range is -55°C to 125°C
- Includes 5 modules and one Dupont cable
MusRock AT24C32 EEPROM Module 10-Pack
This 10-pack of AT24C32 modules offers 32Kbit storage in a through-hole DIP-8 format. It operates from 1.8V to 5.5V DC, making it compatible with 1.8V, 3.3V, and 5V systems. The module supports I2C/SMBus at 100kHz and 400kHz modes. It is designed for easy integration with Arduino and Raspberry Pi boards.
The hardware-level write protection pin helps prevent accidental data loss. This is a good option for system configuration storage and data logging.
- Operates from 1.8V to 5.5V DC
- 10 modules in DIP-8 through-hole format
NOYITO AT24C02 EEPROM Module 2-Pack
This 2-pack features the AT24C02 chip on a compact PCB measuring 1.9 x 1.1 cm. It is designed for I2C/IIC interface communication with onboard pull-up resistors. All pins are drawn and marked for easy wiring. The small form factor makes it suitable for tight spaces in embedded projects.
It is a straightforward option for basic data storage needs where minimal footprint is required. The module is ready for use with standard microcontroller setups.
- PCB size is 1.9 x 1.1 cm
- Includes 2 modules with AT24C02 chip
HiLetgo AT24C256 EEPROM Module 5-Pack
This 5-pack of AT24C256 modules provides 256k bit storage capacity. Each module features an 8-pin chip seat for installing the AT24C256 chip. It uses an I2C interface for communication. The listing is concise, focusing on the core memory module functionality. It is a standard option for developers needing high-capacity serial memory.
The modules are designed for easy integration into existing electronic projects.
- 5 modules with 8P chip seat
- AT24C256 chip with 256k bit capacity
W27C512 Parallel EEPROM IC
This listing offers 1 to 10 pieces of the W27C512-45Z EEPROM in a DIP-28 package. It is a 512Kbit parallel memory chip. The product is described as a high-quality electronic component suitable for industrial, automotive, and household electronics. It is designed for easy installation and use.
The parallel interface distinguishes it from the I2C modules in this comparison. It is a choice for systems requiring parallel memory access.
- DIP-28 package with 512Kbit capacity
- Parallel memory interface
Head-to-Head Comparisons
Ferwooh vs DAOKAI AT24C256 Modules
Both the Ferwooh and DAOKAI modules use the AT24C256 chip with an I2C interface. The Ferwooh 3-pack features a larger PCB measuring 36.5 x 12 x 12 mm, while the DAOKAI 5-pack includes a Dupont cable and specifies an operating temperature range of -55°C to 125°C.
The DAOKAI modules have a 2.54mm pin pitch, which is standard for many development boards. If you need a larger board with clear markings, the Ferwooh option may be preferable. If you need a cable included and specific temperature ratings, the DAOKAI pack is a good fit.
MusRock AT24C32 vs NOYITO AT24C02
The MusRock AT24C32 modules offer 32Kbit capacity and operate from 1.8V to 5.5V DC. The NOYITO AT24C02 modules are smaller, with a PCB size of 1.9 x 1.1 cm, and use the AT24C02 chip. The MusRock modules are better suited for applications requiring more storage space and multi-voltage compatibility.
The NOYITO modules are ideal for tight spaces where minimal footprint is critical. Choose the MusRock for higher capacity and the NOYITO for compactness.
Interstellar SMD Assortment vs W27C512 Parallel IC
The Interstellar Electronics assortment includes 60 SMD SOP-8 chips with capacities from 256B to 8MB. The W27C512 is a single 512Kbit parallel memory chip in a DIP-28 package. The Interstellar kit is best for developers who need to test various I2C memory sizes and have surface-mount soldering capabilities.
The W27C512 is a choice for systems that require a parallel interface rather than I2C. The choice depends on whether you need a variety of I2C chips or a specific parallel memory component.
Buying Guide
Interface Type: I2C vs Parallel
Most modules in this list use the I2C interface, which requires only two data lines for communication. This is ideal for microcontrollers with limited pins. The W27C512 uses a parallel interface, which requires more pins but can offer faster data transfer rates. Choose I2C for simplicity and pin conservation, or parallel if your system architecture specifically requires it.
Storage Capacity Requirements
Capacities range from 256B in the Interstellar assortment to 256k bits in the AT24C256 modules. Determine how much data you need to store. For basic configuration data, smaller capacities like the AT24C02 or AT24C32 may suffice. For extensive data logging, the AT24C256 modules provide significantly more space.
Match the capacity to your specific data storage needs.
Package Type and Soldering
The Interstellar Electronics chips are in SMD SOP-8 packages, requiring surface-mount soldering. The other modules are in through-hole formats, which are easier to solder by hand. If you do not have surface-mount equipment, the through-hole modules are a more practical choice. Consider your soldering capabilities when selecting between SMD chips and through-hole modules.
Voltage Compatibility
The MusRock AT24C32 modules operate from 1.8V to 5.5V DC, making them versatile for different system voltages. Other modules may have specific voltage requirements. Check the voltage of your microcontroller or system to ensure compatibility. Using a module with a voltage range that matches your system prevents potential damage and ensures reliable operation.
Frequently Asked Questions
What is the difference between I2C and parallel EEPROMs?
I2C EEPROMs use two wires for communication, saving pins on your microcontroller. Parallel EEPROMs use multiple wires for data, which can be faster but requires more connections. Choose I2C for simplicity and parallel for specific high-speed needs.
Can I use these modules with Arduino?
Yes, several modules in this list, including the DAOKAI and MusRock options, are explicitly designed for Arduino compatibility. They use standard I2C interfaces that are easy to connect to Arduino boards.
Do I need to solder the chips myself?
The Interstellar Electronics assortment contains SMD chips that require surface-mount soldering. The other modules are pre-assembled on PCBs with through-hole pins, which are easier to install on breadboards or perfboards.
How much data can the AT24C256 store?
The AT24C256 chip has a capacity of 256k bits, which is equivalent to 32 kilobytes. This is significantly more than smaller chips like the AT24C02, making it suitable for larger data logging tasks.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
