Selecting the right infrared emitter depends on the specific requirements of your electronic project, from simple remote control testing to complex robotic sensor arrays. The primary variables to consider are the wavelength, the physical size of the component, and the quantity of pairs included in the kit.
Most kits in this comparison use the standard 940nm wavelength and 5mm diameter, which are compatible with a wide range of Arduino and Raspberry Pi projects. However, some options offer larger 10mm emitters or different wavelengths like 850nm, while others provide mixed receiver types to help you determine the best sensitivity for your application.
Our 3 picks for different needs
FORIOT 50-Pair 5mm 940nm IR Kit
The 50-pair count in the FORIOT kit supports building multiple robots or complex multi-sensor arrays in a single purchase.
Read the details
CHANZON 10mm 850nm IR Emitter Pack
The CHANZON 10mm emitters provide a distinct 850nm wavelength and larger size for specific lighting or transmission applications.
Read the details
CHANZON 940nm Mixed Receiver IR Kit
The CHANZON mixed kit includes both standard and high-sensitivity receivers, allowing users to compare performance in different setups.
Read the detailsAll products, in detail
HiLetgo 5mm 940nm IR Emitter and Receiver Pack
This HiLetgo kit provides a straightforward set of 10 pairs of 5mm infrared components, including 10 emitters and 10 receivers. The 940nm wavelength is standard for many basic sensing applications. It is a simple option for hobbyists who need a small quantity of matched pairs for a single project or for testing basic IR communication without a large inventory.
- Includes 10 IR emitters and 10 IR receivers
- 5mm diameter with 940nm wavelength
Gikfun 5mm 940nm IR Kit for Arduino
The Gikfun EK8460 set includes 10 pairs of 5mm 940nm emitters and VS1838B receivers. The receivers feature a built-in IC designed for interference resistance, which is useful for projects in noisy environments. The pins are noted for good solderability, making them suitable for permanent PCB installations in Arduino-based remote control or temperature measurement projects.
- Includes 10 VS1838B receivers and 10 emitters
- Receivers feature built-in IC for interference resistance
CHANZON 940nm Mixed Receiver IR Kit
This CHANZON kit offers a mixed configuration with 10 emitters and 10 receivers, split between 5 standard receivers and 5 high-sensitivity VS1838B models. The emitters have a 45-degree emitting angle, while the receivers offer 30 and 70-degree receive angles. This variety allows builders to test different sensitivity levels and beam widths for specific sensor placements.
- Includes 10 emitters and 10 receivers (5 standard, 5 VS1838B)
- Emitters have a 45-degree emitting angle
20-Pair 5mm 940nm IR Emitter and Receiver Kit
This unbranded kit provides a larger quantity of 20 pairs, totaling 40 components. It includes 20 emitters and 20 receivers, all in the standard 5mm 940nm format. This higher count is useful for projects requiring multiple sensor arrays, such as line followers or multi-point obstacle detection, where a single pair is insufficient.
- Includes 20 emitters and 20 receivers
- Standard 5mm 940nm configuration
CHANZON 10mm 850nm IR Emitter Pack
This CHANZON pack contains 10 emitters only, with no receivers included. The 10mm size is larger than the standard 5mm, and the 850nm wavelength is distinct from the 940nm standard. It operates at 1.4V-1.6V and is suitable for applications requiring a larger light source or specific 850nm transmission, such as certain night vision or lighting indicators.
- 10mm diameter emitters only
- 850nm wavelength with 30-degree emitting angle
FORIOT 50-Pair 5mm 940nm IR Kit
The FORIOT kit is the largest in this selection, offering 50 pairs of 5mm 940nm components. It is designed for extensive prototyping or production runs, such as building multiple robots or complex sensor arrays. The components are breadboard-friendly with 2.54mm lead spacing and can be driven directly by MCU I/O pins due to low power requirements.
- Includes 50 emitters and 50 receivers
- 2.54mm lead spacing for breadboard use
ALLECIN 60-Piece Mixed Size IR Kit
This ALLECIN kit provides 60 pieces of mixed 3mm and 5mm components, including various receiver models like 1738, 1838, 0038, and 1638. The mix of sizes and receiver types offers flexibility for different PCB layouts and sensitivity needs. It is a versatile option for builders who need to experiment with different component footprints and receiver frequencies.
- 60 pieces including 3mm and 5mm components
- Includes multiple receiver models (1738, 1838, 0038, 1638)
Head-to-Head Comparisons
HiLetgo 10-Pair vs FORIOT 50-Pair: Quantity and Scale
The HiLetgo kit offers 10 pairs of 5mm 940nm components, which is sufficient for a single simple project or basic testing. In contrast, the FORIOT kit provides 50 pairs, making it suitable for larger builds or production runs. If you are building a single line follower or a basic remote control, the HiLetgo set is a compact choice.
However, if you are working on a multi-robot project or a complex sensor array that requires many points of detection, the FORIOT kit reduces the need for multiple purchases. Both use the standard 5mm 940nm format, so the choice is primarily driven by the scale of your project.
CHANZON 10mm 850nm vs Gikfun 5mm 940nm: Wavelength and Size
The CHANZON pack contains 10mm emitters with an 850nm wavelength, while the Gikfun kit includes 5mm emitters with a 940nm wavelength. The 850nm wavelength is often used in specific lighting or transmission applications where a slightly different spectral output is required, and the 10mm size provides a larger light source.
The Gikfun kit, on the other hand, includes both emitters and VS1838B receivers, making it a complete set for standard IR communication. Choose the CHANZON pack if you specifically need 850nm emitters or a larger physical component, and the Gikfun kit if you need a standard 940nm transmitter-receiver pair for general sensing.
CHANZON Mixed Receiver vs ALLECIN Mixed Size: Component Variety
The CHANZON kit focuses on receiver variety within a single size, offering 5 standard receivers and 5 high-sensitivity VS1838B models, all in 5mm. This allows you to test different sensitivity levels without changing the physical footprint. The ALLECIN kit, however, offers variety in both size and receiver model, including 3mm and 5mm components with models like 1738, 1838, 0038, and 1638.
If your PCB layout is fixed and you need to test sensitivity, the CHANZON kit is more focused. If you are experimenting with different component sizes or specific receiver frequencies, the ALLECIN kit provides a broader range of options.
Buying Guide
Wavelength Selection
Most infrared emitters in this category use a 940nm wavelength, which is the industry standard for remote controls and basic sensing. However, some kits, like the CHANZON 10mm pack, use an 850nm wavelength. The 850nm wavelength is often used in applications where a specific spectral output is needed, such as certain night vision or lighting indicators.
If you are building a standard Arduino project, 940nm is the safe choice. If your project requires a different spectral range, check the wavelength specification carefully.
Component Size and PCB Fit
The physical size of the emitter and receiver affects how they fit on your PCB or breadboard. Most kits use the standard 5mm diameter, which is compatible with standard through-hole sockets. Some kits, like the ALLECIN pack, include 3mm components, which are useful for compact designs where space is limited.
The CHANZON 10mm pack offers a larger size, which may be necessary for applications requiring a larger light source or higher visibility. Ensure the size matches your PCB layout or breadboard spacing.
Receiver Sensitivity and Type
Receivers come in different sensitivity levels and models. Standard receivers are suitable for basic remote control applications, while high-sensitivity models like the VS1838B are better for noisy environments or longer distances. The CHANZON mixed kit allows you to compare these directly. The ALLECIN kit offers a range of models including 1738, 1838, 0038, and 1638, which may have different frequency responses.
Choose a kit with the receiver type that matches your project's sensitivity needs.
Quantity and Project Scale
The number of pairs in a kit should match the scale of your project. A 10-pair kit is sufficient for a single simple project, while a 50-pair kit is better for multi-robot builds or complex sensor arrays. If you are unsure, you can always buy a smaller kit and add more later, but buying a larger kit may be more convenient for extensive projects.
Consider how many sensors you need for your specific application, such as a line follower or obstacle avoidance robot, when selecting the quantity.
Frequently Asked Questions
What is the difference between 940nm and 850nm infrared emitters?
940nm is the standard wavelength for most remote controls and basic sensing applications. 850nm is used in specific applications like certain night vision or lighting indicators. The choice depends on your project's requirements; 940nm is generally safer for standard Arduino projects, while 850nm is for specialized uses.
Can I use these emitters with Arduino and Raspberry Pi?
Yes, most of these kits are compatible with Arduino and Raspberry Pi. The emitters typically operate at low voltages (1.2V-1.5V) and can be driven directly by MCU I/O pins. The receivers usually operate at 3V-5V, which is standard for these microcontrollers. Ensure you use appropriate current-limiting resistors if needed.
Do I need both emitters and receivers for my project?
It depends on your application. For remote control or communication, you need both an emitter to send signals and a receiver to detect them. For simple sensing, you might only need a receiver to detect ambient IR light. Most kits include both, but some, like the CHANZON 10mm pack, include emitters only.
What is the VS1838B receiver used for?
The VS1838B is a high-sensitivity infrared receiver module commonly used in remote control applications. It features a built-in IC for interference resistance, making it suitable for noisy environments. It is a popular choice for Arduino projects where reliable signal detection is important.
This article is part of our complete guide Electronics — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
