Selecting the right instrumentation amplifier depends on your specific power requirements, gain needs, and signal precision. Whether you are building a portable medical device or a fixed industrial sensor, the choice of chip and module design significantly impacts performance.
This guide compares eight popular modules, highlighting differences in supply voltage, gain range, and package size. By understanding these technical distinctions, you can match the amplifier to your project's constraints and ensure reliable signal amplification.
Our pick: Teyleten AD620 Amplifier Module (3-Pack). The three-pack of AD620 modules provides multiple identical units for bench testing or sensor arrays.
Our 3 picks for different needs
INA333 Low Power Precision Amplifier Module
The INA333 module operates on 1.8V to 5.5V, making it ideal for battery-powered devices.
Read the details
Taidacent INA114 Amplifier Module
The INA114 module supports gains up to 10,000, suitable for very weak sensor signals.
Read the details
Teyleten AD620 Amplifier Module (3-Pack)
The three-pack of AD620 modules provides multiple identical units for bench testing or sensor arrays.
Read the detailsAll products, in detail
Teyleten AD620 Amplifier Module (3-Pack)
This three-pack of AD620-based modules offers a gain range of 1.5 to 1000, suitable for amplifying microvolt and millivolt signals. The modules support null point adjustment and negative voltage output, which helps in balancing the signal baseline. With a compact 32 x 22mm footprint, these boards are well-suited for bench testing or multi-channel sensor arrays where consistent performance across multiple units is required.
- Gain range of 1.5 to 1000 with DC 3-12V input
- Includes three modules in a single package
INA333 Low Power Precision Amplifier Module
Designed for low-power applications, this INA333 module operates on a supply range of 1.8V to 5.5V, making it ideal for battery-powered or portable devices. It features a low offset voltage of 25 µV and low noise of 50 nV/√Hz at gains of 100 or higher.
The board is compatible with Arduino and other microcontrollers, serving as a precision front-end for electronic sensors and DIY projects that require minimal power consumption.
- Supply range of 1.8V to 5.5V for low-power use
- Low offset voltage of 25 µV at G ≥ 100
JESSINIE INA333 Amplifier Module
This JESSINIE module utilizes the INA333 chip, offering a gain settable from 1 to 1000 via a single external resistor. It provides a high common mode rejection ratio of 100dB at gains of 10 or higher, which is critical for rejecting noise in bridge and medical applications.
The compact design and low power consumption make it a strong candidate for portable instruments, ECG amplifiers, and data acquisition systems where accuracy is paramount.
- Gain range of 1 to 1000 set by one resistor
- Common mode rejection ratio of 100dB at G ≥ 10
Comimark AD8221AR MSOP Amplifier Module
The Comimark module features the AD8221AR, a gain-programmable instrumentation amplifier housed in a space-saving MSOP package. It supports a gain range of 1 to 1000 using a single external resistor. This module is designed for high-performance applications where common mode rejection relative to frequency is a priority.
The compact MSOP form factor allows for dense circuit layouts in industrial or scientific equipment.
- Housed in a space-saving MSOP package
- Gain range of 1 to 1000 with one external resistor
ACEIRMC AD620 Amplifier Module (2-Pack)
This two-pack of ACEIRMC modules uses the AD620 chip to amplify microvolt and millivolt signals with a gain range of 1.5 to 1000. The modules support null point adjustment and negative voltage output, ensuring low distortion in high-frequency signal amplification. The 32 x 22mm size and DC 3-12V input make these boards versatile for various sensor interfaces, providing a cost-effective option for those needing multiple identical channels.
- Two modules included in the package
- Maximum signal voltage output of ±10V
Taidacent INA114 Amplifier Module
The Taidacent INA114 module offers a wide gain range of 1 to 10,000, allowing for significant amplification of weak signals. It supports both single-ended and differential inputs, making it flexible for various sensor types. With an offset voltage of 50uV and a common mode suppression of 115dB at G=1000, this module is well-suited for bridge amplifiers, thermocouples, and medical equipment where high gain is necessary.
- Gain range extends up to 10,000
- Supports single-ended and differential inputs
AD620 Voltage and Instrumentation Amplifier Module
This module uses the AD620 chip to amplify low-level signals with a maximum output range of ±9V. It includes a 7660A negative voltage chip to provide negative power for driving other loads. The zero point can be adjusted via a potentiometer to improve accuracy, and the module features a 32 x 22mm size with 2.54mm standard spacing for easy integration into breadboards or custom PCBs.
- Includes 7660A chip for negative voltage output
- Maximum voltage output range of ±9V
Walfront AD623 Mini Amplifier Module
The Walfront AD623 module is a single-supply, rail-to-rail amplifier designed for compact project development. It offers a gain of up to 1000 and features a smaller internal bias than the AD620, often requiring less adjustment. The AD623 has a slightly narrower bandwidth than the AD620 but is noted for its practical performance in single-supply configurations, making it a good choice for student competitions and portable devices.
- Single-supply operation with rail-to-rail output
- Smaller internal bias compared to AD620
Head-to-Head Comparisons
INA333 Modules: Precision vs. Application Focus
Both the generic INA333 module and the JESSINIE INA333 module use the same low-power precision chip. The primary difference lies in the marketing focus and listed applications. The JESSINIE listing explicitly highlights use in ECG and medical instruments, emphasizing the 100dB CMRR. The generic module focuses on Arduino compatibility and DIY projects.
If you are building a medical front-end, the JESSINIE's explicit application notes may be more reassuring, while the generic module is a straightforward choice for hobbyist sensor interfaces.
INA114 vs. AD620: Gain Range and Supply
The Taidacent INA114 module offers a much wider gain range, up to 10,000, compared to the Teyleten AD620's 1.5 to 1000 range. This makes the INA114 better for extremely weak signals that require massive amplification. However, the AD620 modules support a DC 3-12V input and negative voltage output, which provides more flexibility in power supply design.
If your signal is very weak, choose the INA114; if you need a standard gain range with robust power options, the AD620 is a solid choice.
AD620 vs. AD623: Power Supply and Bias
The AD620 module includes a 7660A chip to generate negative voltage, allowing for a ±9V output range. In contrast, the Walfront AD623 module is designed for single-supply operation and is a rail-to-rail amplifier. The AD623 has a smaller internal bias, which can simplify calibration. Choose the AD620 if you need a bipolar output for driving specific loads; choose the AD623 if you are working with a single positive supply and want a compact, low-bias solution.
Buying Guide
Supply Voltage and Power Requirements
Check the supply voltage range of the module before purchasing. The INA333 modules operate on 1.8V to 5.5V, ideal for low-power and battery applications. The AD620 modules support DC 3-12V, offering more flexibility for bench power supplies. Ensure your power source matches the module's specified range to avoid damage or poor performance.
For portable devices, low-voltage modules are essential.
Gain Range and Signal Strength
Determine the gain required to amplify your sensor signal to a usable level. Most modules offer a gain of 1 to 1000, but the INA114 extends this to 10,000. If your sensor produces very weak microvolt signals, a higher gain range is necessary. For standard millivolt signals, a 1 to 1000 range is usually sufficient.
Consider the noise specifications at your chosen gain to ensure signal integrity.
Package Size and Integration
Consider the physical size of the module for your project. The AD620-based modules listed here have a compact 32 x 22mm footprint, which fits easily on breadboards or custom PCBs. The AD8221AR module uses an MSOP package, which is even smaller and suitable for dense layouts.
Check the specific dimensions and pin spacing provided in the product details to ensure compatibility with your mounting hardware. Compact modules are easier to integrate into portable or space-constrained devices.
Precision and Noise Specifications
For high-accuracy applications, look at the offset voltage and noise specifications. The INA333 modules offer a low offset voltage of 25 µV and low noise of 50 nV/√Hz. The AD620 modules are known for good linearity and precision. If your application involves medical or scientific measurement, prioritize modules with low drift and high common mode rejection ratio to minimize errors.
Check the datasheet for specific values at your operating gain.
Frequently Asked Questions
Can I use these modules with Arduino?
Yes, many of these modules are designed for microcontroller integration. The INA333 modules are explicitly listed for Arduino use. Ensure the supply voltage matches your Arduino's logic levels and that the output voltage does not exceed the microcontroller's input limits.
What is the difference between AD620 and AD623?
The AD620 typically supports a wider supply range and bipolar output, while the AD623 is a single-supply, rail-to-rail amplifier with lower internal bias. The AD620 is often preferred for applications requiring negative voltage output, whereas the AD623 is better for single-supply, low-power designs.
Do I need to adjust the zero point?
Some modules, like the AD620-based ones, include a potentiometer for zero-point adjustment to improve accuracy. The AD623 module has a smaller internal bias and may require less adjustment. Check the specific module's documentation to see if a zero-adjusting potentiometer is included.
Are these modules suitable for medical applications?
The JESSINIE INA333 module is explicitly listed for ECG and medical instrument applications. However, for any medical use, ensure the module meets the necessary safety and regulatory standards for your specific device. The precision and low noise of these chips make them suitable for front-end signal conditioning.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
