Selecting the right jobber drill bits depends on the materials you plan to drill and the specific sizes you need. Jobber length bits are a standard choice for general drilling, but the material composition and tip design significantly impact performance and longevity.
This comparison examines eight different options, ranging from multi-size sets to single-diameter packs. We look at the differences between standard high-speed steel and cobalt-enhanced M35 bits, as well as the benefits of various coatings and shank designs.
Our pick: DEWALT 21-Piece Black Oxide Drill Bit Set. The 21-piece DEWALT set covers a wide size range and is designed for general-purpose drilling in metal, hardwood, softwood, PVC, and fiberglass.
Our 3 picks for different needs
DEWALT 21-Piece Black Oxide Drill Bit Set
The 21-piece DEWALT set covers a wide size range and is designed for general-purpose drilling in metal, hardwood, softwood, PVC, and fiberglass.
Read the details
FiLwW 10-Piece 3/8-Inch M35 Cobalt Drill Bit Set
The FiLwW 3/8-inch M35 cobalt bits are hardened above HRC65, making them suitable for drilling stainless steel and cast iron.
Read the details
DEWALT 21-Piece Titanium Nitride Pilot Point Set
The DEWALT titanium nitride pilot point bits are designed to start on contact for cleaner holes in wood and metal.
Read the detailsAll products, in detail
DEWALT 21-Piece Black Oxide Drill Bit Set
This DEWALT set includes 21 high-speed steel bits with a black oxide coating designed to resist corrosion. The 135-degree split point helps prevent walking on contact, while the 31-degree helix is tuned for deep hole drilling. It covers a wide range of sizes from 1/16-inch to 1/2-inch, making it a versatile choice for general-purpose work in metal, wood, and plastic.
- Includes 21 bits ranging from 1/16-inch to 1/2-inch
- Features a 31-degree helix for deep hole drilling
DEWALT 14-Piece 3-Flats Shank Drill Bit Set
Designed for durability, this 14-piece DEWALT set uses a tapered web design to resist breakage. The 3-flats shank reduces spin-out in the chuck for sizes larger than 3/16-inch, which is a distinct advantage for larger diameter drilling. The black and gold coating helps prevent rust, and size markings on the shank allow for quick identification during use.
- 3-flats shank design reduces spin-out for sizes over 3/16-inch
- Tapered web design increases resistance to breakage
DEWALT 21-Piece Titanium Nitride Pilot Point Set
This DEWALT set features titanium nitride coated pilot point bits intended for longer life and cleaner hole starts. The no-spin shanks help maintain stability during drilling. It includes sizes from 1/16-inch to 1/2-inch and comes with a plastic case for storage. The pilot point design is specifically noted for starting on contact to ensure cleaner holes in wood, metal, and plastic.
- Titanium nitride coating for extended tool life
- Includes a plastic case for storage and organization
Pro Edge 13-Piece M35 Cobalt Jobber Drill Bit Set
The Pro Edge set contains 13 M35 cobalt drill bits ranging from 1/16-inch to 1/4-inch in 1/64-inch increments. Made from 5% cobalt high-speed steel, these bits offer higher wear and heat resistance compared to standard M2 HSS bits. The 135-degree split point aids in self-location and reduces pressure for penetration, making them suitable for stainless steel, cast iron, and other hard materials.
- M35 material contains 5% cobalt for heat resistance
- Sizes range from 1/16-inch to 1/4-inch in 1/64-inch steps
FiLwW 10-Piece 3/8-Inch M35 Cobalt Drill Bit Set
This FiLwW kit includes ten 3/8-inch cobalt drill bits made from M35 high-speed steel. The material is hardened above HRC65, providing superior wear resistance and red hardness for drilling hard materials like stainless steel and cast iron. The design is engineered to maintain strength in high-temperature environments, making it a focused choice for heavy-duty metal processing tasks.
- All 10 bits are 3/8-inch in diameter
- M35 steel is hardened above HRC65 for red hardness
1/4-Inch M35 Cobalt Jobber Drill Bits (12-Pack)
This pack contains twelve 1/4-inch cobalt drill bits with a 135-degree split point and 3-flat shank. The M35 material provides high red hardness, which improves heat resistance compared to typical HSS bits. The uniform hardness allows the bits to be repeatedly sharpened without damaging the cutting edge, extending their usable life for drilling hard metals and stainless steel.
- 12 pieces of 1/4-inch diameter bits
- Uniform hardness allows for repeated sharpening
Drill America 3/16-Inch Black & Gold Split Point Bits (12-Pack)
The Drill America KFD series offers twelve 3/16-inch high-speed steel bits with a black and gold coating. The 135-degree split point tip prevents the drill from walking, ensuring accurate hole placement. These bits are manufactured from premium grade HSS, offering a balance of hardness and toughness for general purpose applications in wood, metal, and stainless steel.
- 12 pieces of 3/16-inch diameter bits
- Black and gold coating on premium grade HSS
Drill Hulk 1/8-Inch M35 Cobalt Jobber Drill Bits (12-Pack)
This Drill Hulk pack includes twelve 1/8-inch cobalt drill bits with a straight shank and 135-degree split point. The M35 material provides high red hardness for better heat resistance than standard HSS. The uniform hardness of the cobalt steel allows for repeated sharpening, making these bits a durable option for drilling hard metals and stainless steel in smaller diameters.
- 12 pieces of 1/8-inch diameter bits
- Straight shank with 135-degree split point
Head-to-Head Comparisons
DEWALT Black Oxide vs Titanium Nitride Sets
Both DEWALT sets include 21 bits ranging from 1/16-inch to 1/2-inch, but they differ in coating and tip design. The black oxide set features a 135-degree split point and a 31-degree helix, which is noted for reducing aggressiveness in deep holes. The titanium nitride set uses a pilot point design intended for cleaner starts and longer life.
If you prioritize deep hole drilling in mixed materials, the black oxide set's helix design is a specific feature to consider. If you prioritize clean hole starts and corrosion resistance, the titanium nitride pilot point set offers those documented benefits.
Pro Edge Multi-Size vs FiLwW Single-Size Cobalt
The Pro Edge set offers 13 different sizes from 1/16-inch to 1/4-inch, providing versatility for various small to medium diameter holes. The FiLwW set focuses on ten 3/8-inch bits, which is a larger diameter often used for heavier structural work. Both use M35 cobalt steel for heat and wear resistance.
The Pro Edge set is better for a workshop needing a range of smaller sizes, while the FiLwW set is a specialized choice for those who frequently drill 3/8-inch holes in hard metals like stainless steel or cast iron.
1/4-Inch vs 1/8-Inch Cobalt Packs
These two packs are similar in material and design, both using M35 cobalt steel with 135-degree split points. The main difference is the diameter: the 1/4-inch pack is for larger holes, while the 1/8-inch pack is for smaller, more precise work. Both are noted for their ability to be repeatedly sharpened due to uniform hardness.
Choose the 1/4-inch bits if your projects require larger diameter holes in hard metals, or the 1/8-inch bits if you are working on smaller components or pilot holes.
Buying Guide
Material Composition: HSS vs Cobalt
Standard high-speed steel (HSS) is suitable for general purpose drilling in wood, plastic, and mild steel. Cobalt-enhanced M35 bits contain 5% cobalt, which provides higher red hardness and heat resistance. This makes them better suited for hard materials like stainless steel and cast iron. If you are primarily drilling soft metals or wood, standard HSS may be sufficient.
For hard metals, the cobalt bits offer documented advantages in heat resistance and wear.
Tip Design: Split Point vs Pilot Point
A 135-degree split point tip helps prevent the drill from walking on the surface, allowing it to start on contact. A pilot point design is also intended to start on contact but is often associated with cleaner hole starts and reduced burring. Both designs improve accuracy compared to standard flat tips.
The specific benefit depends on the material; split points are common in general purpose sets, while pilot points are often found in sets designed for cleaner finishes in wood and metal.
Shank Type and Chuck Compatibility
Most jobber bits use a straight shank, but some larger sizes may use a 3-flats shank. The 3-flats design reduces spin-out in the chuck, which is important for larger diameter bits where a straight shank might slip. If you are drilling sizes larger than 3/16-inch, checking for a 3-flats shank can improve stability.
For smaller bits, a straight shank is standard and compatible with most chucks. Ensure the shank type matches your drill's chuck capabilities for safe operation.
Coating and Durability
Coatings like black oxide and titanium nitride serve different purposes. Black oxide helps resist corrosion and increases durability, making it a common choice for general purpose sets. Titanium nitride is a harder coating that can extend tool life and reduce friction. The choice of coating depends on the environment and materials you drill.
If you store your tools in a humid environment, corrosion resistance is a key factor. If you are drilling hard metals, a harder coating may help maintain the cutting edge longer.
Frequently Asked Questions
What is the difference between M2 and M35 drill bits?
M2 is standard high-speed steel, while M35 contains 5% cobalt. The cobalt addition gives M35 bits higher heat resistance and wear resistance, making them better for drilling hard materials like stainless steel and cast iron.
Can cobalt drill bits be sharpened?
Yes, cobalt bits can be sharpened. The hardness is uniform throughout the material, which allows them to be resharpened without damaging the cutting edge, extending their usable life compared to some other bit types.
What does a 135-degree split point do?
A 135-degree split point reduces the pressure required to penetrate the material and helps the bit self-locate. This prevents the drill from walking on the surface, ensuring more accurate hole placement when you start drilling.
Are jobber length bits suitable for deep holes?
Jobber length bits are standard for general drilling. Some sets, like the DEWALT black oxide set, feature a specific helix angle designed to reduce aggressiveness, which can be beneficial for drilling deep holes without breaking the bit.
This article is part of our complete guide Tools & Home Improvement — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
