Choosing the right LCD dot matrix module depends on whether you need a graphic display for complex visualizations or a character display for simple text. The six options in this comparison range from standard 128×64 monochrome graphic modules to compact 1.8-inch full-color TFT screens and 16×2 character displays. Each serves a different purpose in embedded systems and DIY electronics projects.
The primary decision factors are resolution, interface type, and compatibility with your microcontroller. Graphic modules like the 12864 variants offer more flexibility for drawing shapes and graphs, while character displays are simpler to program for text. TFT modules provide color and higher resolution in a smaller form factor. Reviewing the specific interface requirements, such as SPI or parallel, ensures the display will work with your chosen board.
Our pick: Ximimark 5V 12864 Graphic LCD. The Ximimark 12864 module includes a contrast potentiometer and Arduino examples, simplifying the initial setup process.
Our 3 picks for different needs
AOICRIE 1.8" 3-Pack TFT LCD
The 3-pack of 1.8-inch TFT displays is ideal for builders who need multiple screens or spares for their projects.
Read the details
Ximimark 5V 12864 Graphic LCD
The Ximimark 12864 module includes a contrast potentiometer and Arduino examples, simplifying the initial setup process.
Read the details
Lufasa 1602A Red LCD
The Lufasa 1602A is a character-based display, making it the right choice for projects that only need to show text.
Read the detailsAll products, in detail
Ximimark 5V 12864 Graphic LCD
The Ximimark 12864 module is a 5V graphic display with a 128×64 dot matrix and blue backlight. It includes an integrated potentiometer for adjusting display contrast, which simplifies setup for beginners. The listing notes that easy-to-use Arduino libraries and examples are available, making it a straightforward choice for those starting with graphic displays.
It is a single unit package suitable for projects requiring a standard monochrome graphic interface.
- 128×64 dot matrix resolution with blue backlight
- Includes integrated potentiometer for contrast adjustment
WG12864A Monochrome LCD
The WG12864A is a monochrome dot matrix LCD module with a yellow side and white screen. It is listed as an original display module, suggesting it is a standard component for 128×64 graphic applications. The product data does not specify the controller chip, interface type, or included accessories, so buyers should verify compatibility with their specific microcontroller before purchasing.
It serves as a basic graphic display option for those needing a standard 128×64 resolution without additional features like a built-in contrast pot.
- Monochrome dot matrix display with white screen
- Standard 128×64 resolution module
AOICRIE 1.8" 3-Pack TFT LCD
This AOICRIE 3-pack offers 1.8-inch full-color TFT LCD screens with a 128×160 resolution. Each module uses an ST7735 controller and supports 3.3V power, with a PCB adapter IC that allows for 5V IO compatibility. The displays use SPI communication, requiring only 4 IO pins, and do not need a separate backlight as the display unit emits light.
This pack is ideal for multi-screen projects or for buyers who want spare units for DIY Raspberry Pi or Arduino builds.
- 3-pack of 1.8-inch 128×160 TFT displays
- ST7735 controller with SPI interface and 3.3V/5V IO support
risingsaplings 5V 12864 LCD
The risingsaplings 12864 module is a 5V graphic LCD with a blue backlight and 128×64 pixel resolution. It is described as having a wide viewing angle and high contrast. The package includes two 1×20 pin headers, which are necessary for connecting the module to a breadboard or PCB.
It is noted as compatible with MEGA 2560 and Nano Due boards, making it a solid choice for users with these specific Arduino-compatible microcontrollers who need a graphic display.
- Includes 2pcs 1×20 pin headers
- Compatible with MEGA 2560 and Nano Due
DWEII 2-Pack 1.8" TFT LCD
The DWEII 2-pack provides two 1.8-inch full-color TFT LCD modules with 128×160 resolution. Like the AOICRIE option, these use the ST7735 controller and SPI communication, requiring only 4 IO pins. They support 3.3V power and include a PCB adapter for 5V IO compatibility. The displays are self-emissive, meaning no external backlight is required.
This two-pack is suitable for projects needing dual displays or for buyers who want a backup unit for their primary screen.
- 2-pack of 1.8-inch 128×160 TFT displays
- SPI interface with ST7735 controller
Lufasa 1602A Red LCD
The Lufasa 1602A is a 16×2 character LCD module with a red display and black background. It uses a parallel port interface, which is a standard connection method for character displays. This module is distinct from the graphic options in this list, as it displays text characters rather than arbitrary graphics.
It is a 5V device suitable for projects that require simple text readouts, such as temperature displays or menu systems, where a full graphic matrix is not necessary.
- 16×2 character display with red backlight
- Parallel port interface
Head-to-Head Comparisons
Ximimark vs risingsaplings 12864 Modules
Both the Ximimark and risingsaplings modules are 5V 128×64 graphic LCDs with blue backlights. The key difference lies in the included accessories. The Ximimark listing highlights an integrated potentiometer for contrast adjustment and mentions available Arduino libraries, which is helpful for beginners who need to tune the display.
The risingsaplings module includes two 1×20 pin headers, which are essential for physical connection, and explicitly notes compatibility with MEGA 2560 and Nano Due boards. If you already have pin headers and need a contrast pot, the Ximimark is a strong choice. If you need the headers included and are using a specific Arduino board, the risingsaplings module may be more convenient.
AOICRIE 3-Pack vs DWEII 2-Pack TFTs
The AOICRIE and DWEII products are nearly identical in their technical specifications. Both are 1.8-inch TFT LCDs with 128×160 resolution, using the ST7735 controller and SPI interface. They both support 3.3V power and 5V IO compatibility via a PCB adapter. The main distinction is the quantity: the AOICRIE listing is a 3-pack, while the DWEII listing is a 2-pack.
For a project requiring multiple displays, the 3-pack offers more units. For a single display with one spare, the 2-pack is sufficient. Since the technical features are the same, the choice comes down to how many units you need for your specific build.
Character Display vs Graphic Display
The Lufasa 1602A and the Ximimark 12864 represent two different types of LCD modules. The Lufasa is a 16×2 character display, meaning it can only show pre-defined text characters. It uses a parallel port interface. The Ximimark is a 128×64 graphic display, allowing you to draw any shape or pattern on the screen.
If your project only requires displaying text, such as a clock or temperature reading, the character display is simpler to program and uses fewer resources. If you need to display graphs, icons, or custom graphics, the graphic module is necessary. The choice depends entirely on the visual output your project requires.
Buying Guide
Graphic vs Character Displays
The first decision is whether you need a graphic or character display. Character displays, like the 1602A, are designed to show text and are easier to program for simple readouts. Graphic displays, like the 12864 modules, allow you to draw pixels, lines, and shapes, making them suitable for data visualization and complex interfaces.
If your project involves showing a graph or a custom icon, you need a graphic display. If you are only showing text, a character display is sufficient and often simpler to implement.
Interface and Pin Count
Check the interface type of the display against the available pins on your microcontroller. SPI interfaces, used by the TFT modules, require only 4 IO pins, making them ideal for boards with limited pin availability. Parallel interfaces, used by character displays, require more pins but are often simpler to set up.
I2C interfaces, common in some graphic modules, use only 2 pins. Ensure your board has the correct number of free pins and that you have the necessary libraries for the specific interface. Consider adding tactile switches for user input if your display is interactive.
Power Supply and Voltage
Verify the voltage requirements of the display. Most modules in this list are 5V devices, but the TFT modules support 3.3V power with 5V IO compatibility. If you are using a 3.3V microcontroller, ensure the display can operate at that voltage or that the IO levels are compatible.
Using a 5V display with a 3.3V board without proper level shifting can damage the board. Always check the power specifications in the product details and match them to your power supply and microcontroller capabilities.
Included Accessories and Compatibility
Review what is included in the package. Some modules come with pin headers, which are necessary for connecting to a breadboard or PCB. Others may include a contrast potentiometer, which makes it easier to adjust the display visibility. Check if the listing mentions compatibility with specific microcontrollers, such as Arduino MEGA or Nano.
If you are using a Raspberry Pi, ensure the display is compatible with its GPIO pins. Having the right accessories included can save you time and ensure a smoother setup process. You might also need USB hubs to connect multiple devices during testing.
Frequently Asked Questions
What is the difference between a graphic and a character LCD?
A character LCD displays pre-defined text characters, while a graphic LCD allows you to draw any pixel pattern. Character displays are simpler for text, while graphic displays are needed for graphs and icons.
Do I need a backlight for my LCD module?
Most LCD modules in this list include a backlight, either LED or self-emissive for TFTs. A backlight improves visibility in low-light conditions. Check the product details to see if a backlight is included and what color it is.
Can I use a 5V display with a 3.3V microcontroller?
It depends on the display. Some TFT modules support 3.3V power and 5V IO. For other displays, you may need a level shifter to protect your 3.3V board. Always check the voltage specifications before connecting.
How many pins do I need for an SPI display?
SPI displays typically require 4 IO pins for communication. This is fewer than parallel interfaces, making SPI displays a good choice for microcontrollers with limited pin availability.
This article is part of our complete guide Electronics — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
