Replacing a microwave turntable requires matching specific dimensions and hardware types. The components in this category include glass plates, roller rings, and drive couplers, each serving a different function in the rotation system.
Buyers must verify the diameter of the glass plate and the dimensions of the underlying hardware to ensure compatibility. This guide compares eight options based on their stated specifications and part number compatibility.
Our 3 picks for different needs
Gemroom 12.4" Microwave Plate
The 12.4-inch plate supports a wide range of brands including Toshiba and GE with a small coupler hole.
Read the details
8.7" Turntable Ring 2-Pack
This two-pack of 8.7-inch rings provides a backup for the rotating assembly in compatible microwaves.
Read the details
GE WB49X10224 Glass Tray
This is a genuine General Electric replacement tray for owners of specific GE models.
Read the detailsAll products, in detail
CalPalmy 12" Microwave Glass Plate
This 12-inch glass turntable features three notches at the center to align with the bushing coupling. It is designed as an exact replacement for specific part numbers including W11367904 and W10337247. The plate is made from high-grade glass that is food-safe and dishwasher-safe. It is a suitable choice for buyers who need a standard 12-inch plate with a notched center design for compatible models.
- Outer diameter is 12 inches with 3 center notches
- Compatible with part numbers W11367904 and W10337247
SDTC Tech 8.7" Turntable Ring
This single-pack turntable ring has an outer diameter of 8.7 inches and uses 15mm rollers. It is constructed from high-quality plastic that is flame retardant and temperature resistant. The ring is designed to support glass plates larger than 11.8 inches. It is a specific hardware component for buyers who need to replace the rotating ring assembly rather than the glass plate itself.
- Outer diameter is 8.7 inches with 15mm rollers
- Made of flame retardant plastic
Gemroom 9.6" Microwave Plate
This 9.6-inch glass plate features a small coupler hole measuring 11/16 inches in diameter. It is compatible with specific Panasonic, Nostalgia, and Frigidaire models, including the F06016D00XN part number. The plate requires a 7-inch roller ring to function correctly. It is a precise fit for smaller retro or compact microwaves that use this specific hardware configuration.
- Diameter is 9.6 inches with a 11/16 inch coupler hole
- Requires a 7-inch roller ring
Gemroom 12.4" Microwave Plate
This 12.4-inch glass plate has a small coupler hole and is compatible with a wide range of brands including Toshiba, GE, and Frigidaire. It replaces specific part numbers such as 12570000007510 and WB27X42106. The plate is designed for microwaves with roller ring rotation diameters between 7 1/4 and 9 5/8 inches.
It is a versatile option for buyers with mid-sized appliances from various manufacturers.
- Diameter is 12.4 inches with a small coupler hole
- Compatible with Toshiba and GE part numbers
Gemroom 12" Whirlpool Plate
This 12-inch glass plate is engineered for Whirlpool, GE, and other major brands. It features a track inner diameter of 7 5/8 inches and a track outer diameter of 10 1/4 inches. The listing includes detailed sizing tutorials to help buyers verify fit even if the original plate is missing.
It is a strong choice for buyers who need a 12-inch plate with a small coupler type and specific track dimensions.
- Track inner diameter is 7 5/8 inches
- Compatible with part numbers W11367904 and WB49X10212
GE WB49X10224 Glass Tray
This is a genuine General Electric replacement part for microwave glass trays. It is identified by the model number WB49X10224. As an OEM part, it is designed to match the original specifications of the appliance it replaces. It is a direct choice for owners of GE microwaves who prefer to use manufacturer-specified components for their repair.
- Genuine GE replacement part
- Model number is WB49X10224
8.7" Turntable Ring 2-Pack
This two-pack of turntable rings features an outer diameter of 8.7 inches and 15mm rollers. The rings are made from PPS plastic, which offers high temperature and corrosion resistance. The listing emphasizes that these dimensions are not interchangeable with other ring sizes. It is a practical option for buyers who want a spare ring or need to replace both rings in a set.
- Includes two rings with 8.7 inch outer diameter
- Made from PPS plastic with 15mm rollers
Microwave Turntable Motor Coupler
This drive coupler is made from PPS material and is designed to fit glass turntables and rotating shafts. The shaft length is 0.59 inches, which corresponds to a 15mm height. Buyers are advised to measure the shaft length and diameter of their old coupler to ensure a match.
It is a specific mechanical component for buyers who need to replace the central drive mechanism.
- Shaft length is 0.59 inches / 15mm
- Made from PPS material
Head-to-Head Comparisons
CalPalmy 12" Plate vs Gemroom 12" Plate
Both the CalPalmy and Gemroom 12-inch plates are designed for similar part numbers, including W11367904. The CalPalmy plate features three notches at the center for alignment with the bushing coupling. The Gemroom plate specifies a track inner diameter of 7 5/8 inches and a track outer diameter of 10 1/4 inches.
Buyers should check the center design of their existing hardware to determine which alignment style is required.
SDTC Tech Ring vs 8.7" Ring 2-Pack
The SDTC Tech ring and the 8.7-inch two-pack share the same outer diameter of 8.7 inches and roller height of 15mm. The SDTC Tech option is a single unit made from high-quality plastic, while the other option is a two-pack made from PPS plastic. The two-pack may be useful for buyers who want a spare, while the single unit is sufficient for a standard replacement.
Gemroom 9.6" Plate vs Gemroom 12.4" Plate
These two Gemroom plates differ significantly in size and compatibility. The 9.6-inch plate is for smaller microwaves and requires a 7-inch roller ring. The 12.4-inch plate is for larger appliances and works with roller rings between 7 1/4 and 9 5/8 inches. Both feature a small coupler hole, but the diameter difference makes them incompatible with each other's hardware.
Buying Guide
Measure the Glass Plate Diameter
The diameter of the glass plate is the primary dimension to verify. Measure the distance from the center of the drive coupler to the edge of the plate and double it. If the original plate is missing, measure from the coupler center to the inside edge of the closed door and subtract one inch to estimate the required diameter.
Identify the Coupler Type
The center of the glass plate must match the drive coupler. Some plates have notches, while others have a small hole or a flat bottom. Check the diameter of the coupler hole or the shape of the notches to ensure the new plate will engage with the motor shaft correctly.
Check Roller Ring Dimensions
If replacing the ring, measure the outer diameter and the height of the rollers. Common outer diameters include 158mm, 178mm, 189mm, 221mm, and 233mm. Roller heights are typically 12mm, 15mm, or 18mm. These dimensions are not interchangeable, so both must match your existing hardware.
Verify Part Number Compatibility
Cross-reference your microwave's model number with the part numbers listed in the product description. Some plates are compatible with multiple brands, while others are specific to a single manufacturer. Using the correct part number ensures the plate will fit the specific hardware configuration of your appliance.
Frequently Asked Questions
Can I use a universal microwave turntable?
No, microwave turntables are not universal. Each plate must match the specific diameter, coupler type, and roller ring dimensions of your microwave. Always verify the measurements and part numbers before purchasing.
What is the difference between a plate and a ring?
The plate is the glass surface that holds your food, while the ring is the plastic assembly underneath that allows the plate to rotate. You may need to replace either or both depending on which component is damaged.
How do I know if the coupler is damaged?
If the plate does not rotate or makes a grinding noise, the drive coupler may be worn. Check the shaft length and diameter of the coupler to ensure it matches the replacement part specifications.
Are aftermarket parts safe for food?
Many aftermarket glass plates are made from food-safe glass without harmful chemical additives. Check the product description to confirm that the material is food-safe and dishwasher-safe for your specific needs.
This article is part of our complete guide Appliances — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
