Selecting the correct motor contactor requires matching the pole count, amperage, and coil voltage to your specific equipment. The eight options listed here cover a range of configurations, from single-pole residential units to three-phase industrial models.
Each product is designed for definite purpose applications, primarily in air conditioning and heat pump systems. By comparing the documented specifications, you can identify the unit that aligns with your existing wiring and motor requirements.
Our 3 picks for different needs
SunLee 2 Pole 40 Amp 120V Coil Contactor
Choose this SunLee unit if your system requires a 120 Volt coil and a 2-pole 40 Amp connection for HVAC compressors.
Read the details
1 Pole 40 Amp Enclosed AC Contactor
This enclosed contactor is suitable for buyers needing a 1-pole 40 Amp unit with protected contacts and flexible terminal options.
Read the details
SunLee 3 Pole 40 Amp 120V Coil Contactor
Select this 3-pole SunLee contactor for three-phase motor applications requiring a 120 Volt coil and 40 Amp capacity.
Read the detailsAll products, in detail
BOJACK 2 Pole 30 Amp 24 VAC Contactor
This definite purpose contactor is designed for air conditioner and condenser compressor applications. It features a 2-pole configuration with a 30 Amp FLA rating and a 24 VAC coil. The unit is rated to withstand up to 600 VAC, making it suitable for standard HVAC systems.
It is a straightforward replacement option for systems requiring a 2-pole connection at this specific amperage level.
- 2 Poles with 30 Amp FLA rating
- 24 VAC coil voltage
BOJACK 2 Pole 40 Amp 24 VAC Contactor
Similar to the 30 Amp model, this BOJACK contactor offers a 2-pole design but with a higher 40 Amp FLA rating. It uses a 24 VAC coil and is rated for a maximum withstand voltage of 600 VAC. This unit is intended for air conditioner and condenser compressor motors that require higher current capacity.
It serves as a definite purpose AC contactor for HVAC applications.
- 2 Poles with 40 Amp FLA rating
- 24 VAC coil voltage
BOJACK 1 Pole 30 Amp 24 VAC Contactor
This single-pole contactor is rated for 30 Amps FLA with a 24 VAC coil. It is designed for definite purpose applications in air conditioners and condenser compressors. The 1-pole configuration is typically used for single-phase motor control. Like other models in this group, it has a maximum withstand voltage of 600 VAC, ensuring compatibility with standard residential and light commercial HVAC systems.
- 1 Pole with 30 Amp FLA rating
- 24 VAC coil voltage
SunLee 2 Pole 40 Amp 120V Coil Contactor
The SunLee contactor features a 2-pole, 40 Amp rating with a 120 Volt coil. It is designed to replace various 2-pole contactors rated from 20 to 40 Amps on air conditioners and heat pumps. The unit uses Class F 155°C coil insulation and a Bulk Molding Compound (BMC) base for mechanical strength.
It is listed as equivalent to the 42CF15AF model and is compatible with brands like Carrier, Goodman, and Rheem.
- 120 Volt coil with Class F insulation
- BMC base for mechanical strength
1 Pole 40 Amp Enclosed AC Contactor
This UL-listed 1-pole contactor has a 40 FLA Amp rating and a 24 Volt coil. It features enclosed contacts and an encapsulated coil to protect against insects and debris. The unit includes heavy lug terminals and push-on connections for wiring flexibility. It is designed to replace 1-pole contactors from major HVAC brands such as Carrier, Trane, and York, offering a compact mounting design with four oblong holes.
- Enclosed contacts and encapsulated 24V coil
- Heavy lug and push-on terminal options
BOJACK 1 Pole 40 Amp 24 VAC Contactor
This BOJACK definite purpose contactor is a 1-pole unit rated at 40 Amps FLA. It operates with a 24 VAC coil and is rated for a maximum withstand voltage of 600 VAC. It is intended for use in air conditioner and condenser compressor applications. This model provides a higher amperage option for single-pole motor control circuits compared to the 30 Amp variant.
- 1 Pole with 40 Amp FLA rating
- 24 VAC coil voltage
Dreyoo 1 Pole 30A 24V Coil Contactor
The Dreyoo contactor is a 1-pole, 30A FLA unit with a 24V coil, meeting UL508 and CSA C22.2 standards. It features hermetically sealed coil encapsulation and silver oxide contacts. The package includes DIN rail mounts and stainless steel binding screws. It is compatible with specific Carrier and Cutler-Hammer models and is rated for 600VAC/10HP motor loads, with applications in hospital chillers and data center units.
- Hermetically sealed coil and silver oxide contacts
- Includes DIN rail mounts and binding screws
SunLee 3 Pole 40 Amp 120V Coil Contactor
This SunLee contactor is a 3-pole unit rated at 40 Amps with a 120 Volt coil. It is UL 508 and UL 60947-4-1 compliant and features Silver Cadmium Oxide contacts. The coil uses Class F insulation, and the base is made from high-performance Bulk Molding Compounds.
It is an A2L compliant equivalent to the 42CF35AF model, suitable for three-phase motor control in HVAC systems.
- 3 Pole configuration with 120V coil
- Silver Cadmium Oxide contacts
Head-to-Head Comparisons
BOJACK 30 Amp vs 40 Amp 2-Pole Contactors
Both BOJACK models are 2-pole contactors with 24 VAC coils and 600 VAC withstand ratings. The primary difference is the FLA rating: the first model is rated for 30 Amps, while the second is rated for 40 Amps. If your motor's nameplate specifies a 30 Amp full load current, the 30 Amp model is the direct match.
If your system requires higher capacity, the 40 Amp model provides that additional rating. Check your equipment specifications to determine which amperage level is required.
SunLee 2-Pole vs 3-Pole 120V Coil Contactors
These two SunLee contactors both feature 120 Volt coils and 40 Amp ratings, but they differ in pole count. The 2-pole model is designed for single-phase applications, while the 3-pole model is intended for three-phase motor control. The 3-pole unit is listed as equivalent to the 42CF35AF, whereas the 2-pole unit is equivalent to the 42CF15AF.
Choose the 2-pole version for standard residential HVAC and the 3-pole version for three-phase industrial or commercial motors.
Enclosed 1-Pole vs Sealed 1-Pole 24V Contactors
Both of these 1-pole contactors use 24 Volt coils, but they differ in construction and ratings. The first unit is a 40 Amp enclosed contactor with heavy lug terminals, while the Dreyoo unit is a 30 Amp model with hermetically sealed coil encapsulation. The Dreyoo contactor includes DIN rail mounts and is rated for 600VAC/10HP loads.
The enclosed unit offers a 2-year replacement policy and is compatible with a wide range of HVAC brands. Select based on your required amperage and mounting preference.
Buying Guide
Match Pole Count to Motor Phase
The pole count of a contactor must match the phase of the motor it controls. A 1-pole contactor is typically used for single-phase motors, while a 3-pole contactor is required for three-phase motors. Two-pole contactors are common in residential HVAC systems for controlling both the compressor and fan.
Always verify the phase of your motor before selecting a contactor to ensure proper operation and safety.
Verify Coil Voltage Compatibility
The coil voltage of the contactor must match the control voltage of your system. The products listed here include both 24 VAC and 120 Volt coil options. Using a contactor with the wrong coil voltage can prevent the unit from operating or cause damage. Check the voltage rating on your existing contactor or control board to ensure the replacement unit is compatible with your system's low-voltage or line-voltage control circuit.
Check Amperage Rating Against Nameplate
The FLA (Full Load Amps) rating of the contactor should match or exceed the motor's nameplate rating. For example, if your motor is rated at 30 Amps, a 30 Amp contactor is appropriate. If the motor is rated at 40 Amps, you must select a 40 Amp contactor.
Do not use a contactor with a lower amperage rating than the motor requires, as this can lead to overheating and failure. Always refer to the motor nameplate for the correct FLA value.
Consider Mounting and Terminal Types
Different contactors offer various mounting and terminal configurations. Some units feature enclosed contacts and encapsulated coils for protection against debris, while others include DIN rail mounts for panel installation. Terminal types can include heavy lugs, push-on connections, or quick-connect terminals. Ensure the physical dimensions and terminal types of the new contactor are compatible with your existing wiring and mounting space to facilitate a smooth installation.
Frequently Asked Questions
What is the difference between a 1-pole and 2-pole contactor?
A 1-pole contactor controls a single circuit, typically for single-phase motors. A 2-pole contactor controls two circuits, often used in HVAC systems to manage both the compressor and the fan. The choice depends on the specific requirements of your equipment and the phase of the motor.
Can I use a 120V coil contactor in a 24V system?
No, the coil voltage must match the control voltage of your system. A 120V coil contactor will not operate correctly in a 24V system, and vice versa. Always verify the coil voltage rating to ensure compatibility with your control board or transformer.
What does FLA rating mean on a contactor?
FLA stands for Full Load Amps, which is the current drawn by the motor when it is running at its rated load. The contactor's FLA rating indicates the maximum current it can handle continuously. Matching the contactor's FLA rating to the motor's nameplate rating is essential for safe and reliable operation.
Are these contactors suitable for industrial applications?
Some of the listed contactors are designed for industrial use, particularly the 3-pole and high-amperage models. They are rated for motor loads and meet relevant standards like UL 508. However, you should verify that the specific model meets the requirements of your industrial equipment and local electrical codes.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
