Tools & Home Improvement

Notched Shim Assortment: 5 Carbon Steel Options Compared

This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.

Product details come from Amazon listings. Compare the specifications that matter to you, and check the current price and availability on Amazon before buying. How we compare

Selecting the correct notched shim requires matching the inner diameter to your specific shaft or pin size. These five assortments are all made from 1008/1010 carbon steel with a hard temper and matte finish, but they differ significantly in their inner and outer diameters.

Each pack contains 19 shims with varying thicknesses, allowing for fine alignment adjustments. The primary distinction between these products is the size of the bore, ranging from 5/8 inches to 1-3/8 inches. Choosing the right size ensures proper clearance and contact area for your mechanical application.

Our pick: 1008/1010 Carbon Steel Notched Shim 5/8" ID. The 5/8-inch inner diameter suits applications with smaller shafts or pins.

AT A GLANCE

Our 3 picks for different needs

1008/1010 Carbon Steel Notched Shim Assortment, Matte Finish, Hard Temper, AISI 1008/AISI...
01Small Shaft Fit

1008/1010 Carbon Steel Notched Shim 5/8" ID

The 5/8-inch inner diameter suits applications with smaller shafts or pins.

Read the details
1008/1010 Carbon Steel Notched Shim Assortment, Matte Finish, Hard Temper, AISI 1008/AISI...
02Medium Shaft Fit

1008/1010 Carbon Steel Notched Shim 1" ID

The 1-inch inner diameter is appropriate for medium-sized components.

Read the details
1008/1010 Carbon Steel Notched Shim Assortment, Matte Finish, Hard Temper, AISI 1008/AISI...
05Large Shaft Fit

1008/1010 Carbon Steel Notched Shim 1-3/8" ID

The 1-3/8-inch inner diameter fits larger shafts or pins.

Read the details

All products, in detail

1008/1010 Carbon Steel Notched Shim Assortment, Matte Finish, Hard Temper, AISI 1008/AISI...
01Small Shaft Fit

1008/1010 Carbon Steel Notched Shim 5/8" ID

This assortment contains 19 round shims made from 1008/1010 carbon steel with a hard temper and matte finish. The 5/8-inch inner diameter and 1-inch outer diameter make it suitable for smaller shafts or pins. The matte surface reflects minimal light, reducing glare during inspection. Standard tolerance ensures consistent fit.

This specific size is ideal for applications requiring a compact shim profile where the bore diameter is relatively small. The varying thicknesses within the pack allow for fine adjustments in alignment. Buyers should verify that their specific shaft or pin diameter matches the 5/8-inch ID before purchasing to ensure proper clearance and function.

  • 5/8-inch inner diameter and 1-inch outer diameter
  • Made from 1008/1010 carbon steel with hard temper
  • Matte finish reflects minimal light
1008/1010 Carbon Steel Notched Shim Assortment, Matte Finish, Hard Temper, AISI 1008/AISI...
02Medium Shaft Fit

1008/1010 Carbon Steel Notched Shim 1" ID

This pack of 19 shims features a 1-inch inner diameter and a 1-1/2-inch outer diameter. Constructed from 1008/1010 carbon steel with a hard temper, these shims provide good strength for mechanical applications. The matte finish offers a dull appearance that minimizes light reflection. Standard tolerance is maintained across the varying thicknesses included in the assortment.

This size is appropriate for medium-sized shafts or components where a 1-inch bore is required. The larger outer diameter compared to the 5/8-inch ID version provides a wider contact surface area. Shoppers should confirm their specific component dimensions to ensure the 1-inch ID fits their application correctly.

  • 1-inch inner diameter and 1-1/2-inch outer diameter
  • 1008/1010 carbon steel construction with hard temper
  • Matte finish with standard tolerance
1008/1010 Carbon Steel Notched Shim Assortment, Matte Finish, Hard Temper, AISI 1008/AISI...
03

1008/1010 Carbon Steel Notched Shim 7/8" ID

This assortment includes 19 shims with a 7/8-inch inner diameter and a 1-3/8-inch outer diameter. The shims are made from 1008/1010 carbon steel and feature a hard temper for durability. The matte finish provides a surface that reflects minimal light, which is useful in bright workshop environments.

Standard tolerance ensures the shims fit as expected. This size sits between the 5/8-inch and 1-inch ID options, offering a specific fit for components with a 7/8-inch bore. The varying thicknesses allow for precise alignment adjustments. Buyers should measure their specific shaft or pin to confirm the 7/8-inch ID is the correct match for their mechanical setup.

  • 7/8-inch inner diameter and 1-3/8-inch outer diameter
  • 1008/1010 carbon steel with hard temper
  • Matte finish with standard tolerance
1008/1010 Carbon Steel Notched Shim Assortment, Matte Finish, Hard Temper, AISI 1008/AISI...
04

1008/1010 Carbon Steel Notched Shim 1-1/8" ID

This pack of 19 shims has a 1-1/8-inch inner diameter and a 1-5/8-inch outer diameter. Made from 1008/1010 carbon steel with a hard temper, these shims offer good strength for heavier or larger components. The matte finish minimizes light reflection, providing a dull appearance. Standard tolerance is applied to the varying thicknesses in the assortment.

This larger ID is suitable for applications involving larger shafts or pins where a 1-1/8-inch bore is necessary. The increased outer diameter provides a broader surface area for contact. Shoppers should verify their component dimensions to ensure the 1-1/8-inch ID aligns with their specific mechanical requirements.

  • 1-1/8-inch inner diameter and 1-5/8-inch outer diameter
  • 1008/1010 carbon steel with hard temper
  • Matte finish with standard tolerance
1008/1010 Carbon Steel Notched Shim Assortment, Matte Finish, Hard Temper, AISI 1008/AISI...
05Large Shaft Fit

1008/1010 Carbon Steel Notched Shim 1-3/8" ID

This assortment contains 19 shims with a 1-3/8-inch inner diameter and a 1-7/8-inch outer diameter. The shims are constructed from 1008/1010 carbon steel and feature a hard temper for robust performance. The matte finish reflects minimal light, reducing glare during use. Standard tolerance ensures consistent dimensions across the varying thicknesses.

This is the largest ID option in this set, making it suitable for larger shafts or components requiring a 1-3/8-inch bore. The substantial outer diameter provides a wide contact area. Buyers should confirm their specific shaft or pin diameter matches the 1-3/8-inch ID to ensure proper fit and function in their application.

  • 1-3/8-inch inner diameter and 1-7/8-inch outer diameter
  • 1008/1010 carbon steel with hard temper
  • Matte finish with standard tolerance

Head-to-Head Comparisons

5/8" ID vs 1" ID Notched Shims

The 5/8-inch ID shim has a 1-inch outer diameter, while the 1-inch ID shim has a 1-1/2-inch outer diameter. Both are made from 1008/1010 carbon steel with a hard temper and matte finish. The 5/8-inch ID is suitable for smaller shafts, whereas the 1-inch ID fits medium-sized components.

The data does not establish which size is stronger, as both use the same material and temper. Buyers should measure their specific shaft to determine which inner diameter is required for their application.

1" ID vs 7/8" ID Notched Shims

The 1-inch ID shim has a 1-1/2-inch outer diameter, while the 7/8-inch ID shim has a 1-3/8-inch outer diameter. Both assortments contain 19 shims with varying thicknesses and are made from 1008/1010 carbon steel. The 7/8-inch ID is slightly smaller than the 1-inch ID, making it suitable for components with a 7/8-inch bore.

The data does not specify which size offers better durability, as both share the same material properties. Shoppers should verify their component dimensions to select the correct inner diameter.

7/8" ID vs 1-1/8" ID Notched Shims

The 7/8-inch ID shim has a 1-3/8-inch outer diameter, while the 1-1/8-inch ID shim has a 1-5/8-inch outer diameter. Both are constructed from 1008/1010 carbon steel with a hard temper and matte finish. The 1-1/8-inch ID is larger, suitable for bigger shafts, while the 7/8-inch ID fits smaller components.

The data does not establish a performance difference between the two sizes, as they share the same material and finish. Buyers should measure their specific shaft to ensure the correct inner diameter is selected.

1-1/8" ID vs 1-3/8" ID Notched Shims

The 1-1/8-inch ID shim has a 1-5/8-inch outer diameter, while the 1-3/8-inch ID shim has a 1-7/8-inch outer diameter. Both assortments are made from 1008/1010 carbon steel with a hard temper and matte finish. The 1-3/8-inch ID is the largest in this set, suitable for larger shafts, while the 1-1/8-inch ID fits medium-large components.

The data does not specify which size is more durable, as both use the same material. Shoppers should confirm their component dimensions to choose the appropriate inner diameter.

Buying Guide

Matching Inner Diameter to Shaft Size

The primary factor in choosing a notched shim is the inner diameter, which must match the shaft or pin size. The 5/8-inch ID shim is suitable for smaller shafts, while the 1-3/8-inch ID shim fits larger components.

The 7/8-inch and 1-inch ID options provide intermediate sizes for medium-sized shafts. The 1-1/8-inch ID shim is appropriate for larger shafts that do not require the maximum size.

Buyers should measure their specific shaft diameter to ensure the shim fits correctly without excessive clearance or interference.

Considering Outer Diameter for Contact Area

The outer diameter determines the contact area of the shim. The 5/8-inch ID shim has a 1-inch outer diameter, while the 1-3/8-inch ID shim has a 1-7/8-inch outer diameter. A larger outer diameter provides a wider contact surface, which may be beneficial for certain applications.

Buyers should consider the available space and contact requirements when selecting a shim size.

Material and Finish Consistency

All five assortments are made from 1008/1010 carbon steel with a hard temper and matte finish. This consistency ensures that the material properties and appearance are similar across all sizes. The matte finish reflects minimal light, reducing glare during inspection. Buyers can expect similar performance and durability from any of these sizes, as they share the same material and finish.

Assortment Quantity and Thickness Variations

Each pack contains 19 shims with varying thicknesses. This allows for fine alignment adjustments without needing to purchase multiple packs. The standard tolerance ensures consistent dimensions across the assortment. Buyers should verify that the included thicknesses meet their specific alignment needs, as the exact thicknesses are not listed in the provided data.

Frequently Asked Questions

What material are these notched shims made from?

All five assortments are made from 1008/1010 carbon steel with a hard temper. This material provides good strength for mechanical applications. The matte finish reflects minimal light, reducing glare during use.

How many shims are included in each pack?

Each pack contains 19 shims with varying thicknesses. This assortment allows for fine alignment adjustments. The standard tolerance ensures consistent dimensions across the included shims.

What is the difference between the different sizes?

The primary difference is the inner and outer diameter. The 5/8-inch ID shim has a 1-inch OD, while the 1-3/8-inch ID shim has a 1-7/8-inch OD. Buyers should match the inner diameter to their shaft size.

Do these shims have a matte finish?

Yes, all five assortments feature a matte finish. This finish provides a surface that reflects minimal light and has a dull appearance. It is useful in bright workshop environments to reduce glare.

Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API

Was this article helpful?

Thanks for your feedback!

Thanks — we'll work to improve this article.

Kylan Shields

Kylan Shields

Kylan Shields is the editorial byline of Tossions. Comparisons published under this name are compiled from Amazon listing data (specifications, customer ratings and availability), not from hands-on testing.