Selecting the right puller set depends on the specific components you need to remove and the access available in your workspace. Whether you are dealing with tight spaces in an engine bay or large bearings on a vehicle axle, the configuration of the jaws and the reach of the tools are critical factors.
This comparison examines eight distinct puller sets, ranging from compact 20-piece kits to comprehensive 46-piece harmonic balancer sets. We look at jaw configurations, steel construction, and reach capabilities to help you identify the tool that fits your mechanical needs.
Our pick: OMT 24-Piece 2 & 3 Jaw Gear Puller Kit. This kit includes both straight and triangular jaw brackets, allowing users to assemble 2-jaw or 3-jaw pullers for diverse applications.
Our 3 picks for different needs
OMT 24-Piece 2 & 3 Jaw Gear Puller Kit
This kit includes both straight and triangular jaw brackets, allowing users to assemble 2-jaw or 3-jaw pullers for diverse applications.
Read the details
Orion Motor Tech 9-Way Slide Hammer Puller Set
The inclusion of a 4 lb slide hammer makes this set suitable for flange-type rear axles and other press-fit parts that require dynamic force.
Read the details
Orion Motor Tech Bearing Splitter Tool Kit
With 2 and 3 inch jaws rated for 5 ton capacity, this kit is designed for removing large bearings from wheel hub axle shafts.
Read the detailsAll products, in detail
OMT 24-Piece 2 & 3 Jaw Gear Puller Kit
This 24-piece kit from Orion Motor Tech offers four puller sizes with maximum spreads of 3, 4, 6, and 8 inches. It includes straight and triangular jaw brackets for both 2-jaw and 3-jaw assemblies. The reversible jaw design allows extraction from inside or outside, while dual fixing holes on larger pullers provide four reach configurations.
Constructed from heat-treated steel with a chrome-plated or blackened finish, the set comes in a custom blow-molded case for organized transport.
- Includes four puller sizes with reaches up to 9.2 inches
- Features reversible jaws with dual fixing holes for multiple configurations
Orion Motor Tech 9-Way Slide Hammer Puller Set
Designed for flange-type rear axles and front-wheel-drive hubs, this set includes a 4 lb slide hammer for dynamic pulling. It provides 2-jaw and 3-jaw pullers, cross blocks, and a cone-type puller for various jaw configurations. The components are built from carbon steel alloy and chrome vanadium steel to withstand heavy use.
A detailed parts diagram and step-by-step instructions are included to assist with complex tasks like piston wind-back.
- Includes a 4 lb slide hammer for press-fit part removal
- Constructed from carbon steel alloy and chrome vanadium steel
OMT 3 Jaw Gear Puller Set
This 3-jaw puller set from Orion Motor Tech fits standard wrenches or ratchets for removing gears, bearings, and crank pulleys. It includes four sizes with maximum spreads of 3, 4, 6, and 8 inches. The reinforced jaws distribute even pulling force to prevent damage to components.
Reversible jaws allow for inside or outside pulling, with the 6 and 8 inch pullers offering four configurations via dual fixing holes. The drop-forged carbon steel build features corrosion-proof coatings.
- Features 3-jaw design with reinforced jaws for even force distribution
- Made from drop-forged and heat-treated carbon steel
Reywoo 2 & 3 Jaw Gear Puller Set
The Reywoo gear puller kit is suitable for removing gears, hubs, bearings, and flywheels from vehicles and smaller engines. It offers four sizes with spreads of 3, 4, 6, and 8 inches and reaches up to 9.2 inches. The set can be configured with 2 or 3 claws, and the reversible jaws feature dual fixing holes for short or long reach.
Larger sizes include swivel thrust plates to protect shaft ends. The chromium vanadium steel construction is precision machined and heat-treated.
- Larger sizes feature swivel thrust plates to protect shaft ends
- Made from high-quality chromium vanadium steel with chrome-plated surface
Thorstone 46-Piece Harmonic Balancer Puller Set
This blue 46-piece set from Thorstone is designed for harmonic balancers, flywheels, and steering wheels. It includes 30 different bolts and a four-yoke slot to handle a range of jobs on cars, trucks, and small engine vehicles. All components are crafted from heat-treated carbon steel with oxide finishes to resist rust.
The set comes with a heavy-duty blow-molded carrying case for safe storage and quick organization.
- Includes 30 different bolts and a four-yoke slot
- Components are crafted from heat-treated carbon steel with oxide finishes
Orion Motor Tech Bearing Splitter Tool Kit
This bearing puller set is ideal for removing large or small bearings on wheel hub axle shafts. It includes 2 and 3 inch bearing separator jaws with a 5 ton capacity, along with a 6 inch yoke and various extension screws. The knife-like taper feature allows jaws to get behind bearings for a secure grip.
Constructed from heat-treated Cr-V steel with a black oxide finish, the kit is suitable for professionals and home mechanics working on most vehicles and ATVs.
- Features 2 and 3 inch bearing separator jaws with 5 ton capacity
- Includes a 6 inch yoke and multiple extension screws for tight spaces
OMT 3 Jaw Gear Puller Set (Variant)
This 3-jaw puller set from Orion Motor Tech is designed for universal removal of gears, bearings, and pulleys. It includes four puller sizes with maximum spreads of 3, 4, 6, and 8 inches. The 3-jaw design bites tightly onto components with reinforced jaws to distribute even pulling force.
Reversible jaws allow for inside or outside pulling, and the 6 and 8 inch pullers provide four configurations. The drop-forged carbon steel build ensures durability with corrosion-proof coatings.
- Includes four puller sizes with reaches up to 9.2 inches
- Features reversible jaws with dual fixing holes for multiple configurations
kauplus 20-Piece Bearing and Pulley Puller Set
The kauplus set is designed for a wide range of pulling jobs, including bearings, alternators, and harmonic balancers. It contains drop-forged components that can be used in various combinations, including jaw pins, forcing screws, cross-bar yokes, and clamp bolts. The set offers a reach of 1 to 2-1/4 inches and a spread of 3 to 5 inches.
This compact configuration is suitable for specific pulling tasks where larger spreads are not required.
- Set has a reach of 1 inch to 2-1/4 inch
- Set has a spread of 3 inch to 5 inch
Head-to-Head Comparisons
OMT 24-Piece Kit vs OMT 3 Jaw Set
Both Orion Motor Tech sets offer four puller sizes with spreads of 3, 4, 6, and 8 inches. The 24-piece kit includes straight and triangular jaw brackets, allowing for both 2-jaw and 3-jaw assemblies. The 3 Jaw Set focuses exclusively on the 3-jaw configuration, which distributes force evenly across three points.
If you need the flexibility to switch between 2-jaw and 3-jaw setups, the 24-piece kit provides that versatility. If you prefer the stability of a 3-jaw design for most tasks, the dedicated 3 Jaw Set is a streamlined option.
Slide Hammer Set vs Bearing Splitter Kit
The 9-Way Slide Hammer Set includes a 4 lb slide hammer, which is useful for dynamic pulling of flange-type rear axles and dents. The Bearing Splitter Kit is designed for static, high-capacity removal of bearings from wheel hubs, featuring 2 and 3 inch jaws with a 5 ton capacity.
The slide hammer set offers a wider variety of jaw configurations including cross blocks and cone-type pullers. The bearing splitter kit is more specialized for axle shafts and includes specific extension screws for reaching tight spaces.
Thorstone 46-Piece Set vs kauplus 20-Piece Set
The Thorstone set is a 46-piece kit that includes 30 different bolts and a four-yoke slot, designed for harmonic balancers and steering wheels. The kauplus set is a 20-piece kit with a spread of 3 to 5 inches and a reach of 1 to 2-1/4 inches.
The Thorstone set offers a much larger variety of bolts and yokes, making it suitable for a wide range of vehicle applications. The kauplus set is more compact and focused on specific bearing and pulley removal tasks with a smaller spread range.
Buying Guide
Jaw Configuration and Reach
Determine if you need 2-jaw or 3-jaw pullers based on the component you are removing. 3-jaw pullers distribute force evenly and are often used for bearings and pulleys. 2-jaw pullers are useful for specific flange or axle applications. Check the maximum spread and reach of the set to ensure it fits your components.
Sets with reversible jaws and dual fixing holes offer more flexibility in tight spaces.
Steel Construction and Durability
Look for puller sets made from heat-treated carbon steel or chromium vanadium steel. These materials provide the strength needed for heavy pulling tasks and resist rust. Check the finish, such as chrome-plated or black oxide, for corrosion resistance. Durable construction ensures the tools can withstand accidental drops and years of heavy use without cracking.
Compatibility with Wrenches and Ratchets
Most gear puller sets are designed to fit standard wrenches or ratchets. This allows you to use your existing tools to apply force. Some sets, like the bearing splitter kits, include specific forcing screws and yokes that may require specific tools. Ensure the set you choose is compatible with the tools you already own to avoid additional purchases.
Check if the set includes socket sets or specific adapters.
Storage and Organization
A good puller set should come with a carrying case to keep the components organized and protected. Blow-molded cases are common and provide durable storage. Organization is important because puller sets have many small parts like bolts, pins, and jaws. A well-organized case helps you quickly find the right component for your job and prevents loss of small parts.
Frequently Asked Questions
What is the difference between a 2-jaw and a 3-jaw puller?
A 2-jaw puller applies force from two points, often used for flanges or axles. A 3-jaw puller applies force from three points, distributing the load more evenly. This makes 3-jaw pullers suitable for bearings and pulleys where even force is critical to prevent damage.
Can I use a gear puller set for removing bearings?
Yes, many gear puller sets are designed to remove bearings, pulleys, and flywheels. Look for sets with reinforced jaws that distribute force evenly. Some sets are specifically designed as bearing pullers with higher capacity jaws for large axle bearings.
What does reversible jaw design mean?
Reversible jaws can be flipped to pull parts from either the inside or the outside of a component. This increases the versatility of the tool, allowing you to access parts in different orientations. It is particularly useful in tight spaces where standard jaw orientation might not fit.
How do I choose the right size for my puller set?
Check the maximum spread and reach of the puller set. The spread is the distance between the tips of the jaws, and the reach is the distance from the forcing screw to the jaw tips. Ensure the set can accommodate the size of the components you need to remove.
This article is part of our complete guide Tools & Home Improvement — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
