Electronics

Reed Relays: 8 Options in 2026 Compared by Voltage and Contact Rating

This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.

Product details come from Amazon listings. Compare the specifications that matter to you, and check the current price and availability on Amazon before buying. How we compare

Selecting the right reed relay depends on matching the coil voltage, contact rating, and package type to your specific circuit requirements. These eight options range from 5V and 12V coil voltages to glass envelope switches, with contact ratings from 0.25A to 1A.

Whether you are building a PCB assembly or a magnetic induction sensor, the physical form factor and electrical limits are critical. This comparison highlights the documented specifications for each unit to help you identify the component that fits your design constraints.

AT A GLANCE

Our 3 picks for different needs

Aleph 5v Reed relay, open type, SIL4 package
08Fast Switching PCB Mount

Aleph 5v SIL4 Reed Relay

The Aleph SIL4 relay offers a documented 1ms response time and 1A switching rating in a PCB mount package.

Read the details
Gebildet 10pcs 3 Pin SPDT Glass Reed Switch Reed Contact Normally Open N/O N/C, Glass Reed Relay...
07Magnetic Testing Kit

Gebildet 10pcs 3 Pin Reed Switch + Magnets

The Geboldt set includes ten reed switches and ten magnet pieces, providing a complete kit for testing magnetic induction.

Read the details
Bestar Electric BR-1050-VP Reed Relays, SPST-NO, 0.5A, 12VDC, 1050 Ohm, Through Hole, 1' L x 0.37' W...
0312V Control System

Bestar Electric BR-1050-VP Reed Relay

The Bestar BR-1050-VP is a 12V DC through-hole relay, suitable for control systems requiring that specific coil voltage.

Read the details

All products, in detail

5Pcs Black for SIP-1A05 Switch Relay 5V SIP-1A05 Reed Relays Switches 4 Pins DC Resistance...
01

5Pcs Black SIP-1A05 Reed Relay Module

This set of five black SIP-1A05 relay switches features a 4-pin configuration with a 5V DC coil and 450-550 ohm resistance. The single in-line package form factor is designed for PCB mounting and electronic assemblies. Each unit is rated for 1A current with normally open contacts, making it suitable for low-power signal switching applications where space efficiency is a priority in circuit integration.

  • 5V DC coil with 450-550 ohm resistance
  • SIP form factor with 4-pin configuration
HiLetgo 5pcs SIP-1A05 Reed Switch Relay 5V SIP-1A05 Reed Relay Switch 4 Pins DC Resistance...
02

HiLetgo 5pcs SIP-1A05 Reed Relay

The HiLetgo SIP-1A05 reed relay switch is a 5V DC component with a 4-pin layout and 450-550 ohm DC resistance. This listing provides a set of five units, offering a straightforward option for builders needing multiple identical reed switches for their projects. The specifications focus on the standard SIP-1A05 model, providing a consistent choice for those familiar with this specific relay type in electronic circuits.

  • 5V DC voltage rating
  • 450-550 ohm DC resistance
Bestar Electric BR-1050-VP Reed Relays, SPST-NO, 0.5A, 12VDC, 1050 Ohm, Through Hole, 1' L x 0.37' W...
0312V Control System

Bestar Electric BR-1050-VP Reed Relay

The Bestar Electric BR-1050-VP is a through-hole reed relay with a 12V DC coil and 1050 ohm resistance. It features a SPST-NO contact form and is rated for 0.5A current. The physical dimensions are approximately 1 inch in length, 0.37 inches in width, and 0.38 inches in height.

This pack of two units is manufactured in Taiwan and offers a specific 12V option for control systems requiring that voltage level.

  • 12V DC coil with 1050 ohm resistance
  • SPST-NO contact form rated for 0.5A
JESSINIE 5PCS SIP-1A05 Reed Switch Relay 5V SIP-1A05 Reed Relay Switch 4 Pins DC Resistance...
04

JESSINIE 5PCS SIP-1A05 Reed Relay

This JESSINIE set includes five SIP-1A05 reed relay switches with a 5V DC power supply mode and 450-550 ohm resistance. The listing notes a voltage rating of up to 36V and a 1A relay module capability. Originating from Chinese Mainland, these units are presented as normally open modules.

The inclusion of the 36V voltage specification in the features provides additional context for the electrical limits of this specific SIP-1A05 variant.

  • Voltage rating up to 36V
  • 5V DC power supply mode
Gebildet 10pcs 4W 3 Pin Reed Switch Reed Contact Normally Open N/O N/C SPDT, Glass Reed Relay...
05

Gebildet 10pcs 3 Pin Glass Reed Switch

This pack of ten 3-pin glass reed switches features a 2.5mm diameter and 14mm glass length. The switches are available in normally open or normally closed configurations and are rated for a maximum contact rating of 4W. With a maximum switching voltage of 60V DC/VAC and a working temperature range of -20 to 80 degrees, these components are suitable for magnetic induction switching applications requiring small glass envelope components.

  • 2.5mm diameter glass envelope
  • Max contact rating of 4W
Excel Cell EDR2D1A0500Z SPST-NO Reed Relays, 0.5A, 5 VDC, 500 Ohm Through-Hole, 0.22' H x 0.77' L x...
06

Excel Cell EDR2D1A0500Z Reed Relay

The Excel Cell EDR2D1A0500Z is a through-hole reed relay with a 5V DC coil and 500 ohm resistance. It features a SPST-NO contact form and is rated for 0.5A contact current with a 100V DC contact voltage. The physical dimensions are 0.22 inches in height, 0.77 inches in length, and 0.3 inches in width.

This pack of two units provides a specific 5V option with higher contact voltage tolerance compared to some other 5V relays in this comparison.

  • 5V DC coil with 500 ohm resistance
  • 100V DC contact voltage rating
Gebildet 10pcs 3 Pin SPDT Glass Reed Switch Reed Contact Normally Open N/O N/C, Glass Reed Relay...
07Magnetic Testing Kit

Gebildet 10pcs 3 Pin Reed Switch + Magnets

This Geboldt set includes ten 3-pin SPDT glass reed switches along with ten magnet pieces. The switches have a 2.5mm diameter and 14mm glass length, with a total length of 52mm. They are rated for a maximum contact rating of 4W and a maximum switching voltage of 60V DC/VAC.

The inclusion of magnet pieces makes this kit convenient for testing magnetic induction switching without sourcing separate magnets.

  • Includes 10 magnet pieces
  • SPDT configuration with 3 pins
Aleph 5v Reed relay, open type, SIL4 package
08Fast Switching PCB Mount

Aleph 5v SIL4 Reed Relay

The Aleph 5V reed relay features an open type SIL4 package designed for PCB mounting. It has a 5V DC coil with a SPST configuration and is rated for 1 Amp switching. The physical dimensions are 25mm in length, 9mm in width, and 9.5mm in height.

The listing specifies a 1ms response time, which is a relevant metric for applications requiring fast switching speeds in electronic control systems.

  • 1ms response time
  • SIL4 package with 1 Amp switching

Head-to-Head Comparisons

SIP-1A05 vs Bestar BR-1050-VP: Voltage and Package

The SIP-1A05 relay uses a 5V DC coil with a 1A contact rating, while the Bestar BR-1050-VP uses a 12V DC coil with a 0.5A contact rating. The SIP-1A05 is in a single in-line package, whereas the Bestar is a through-hole component. If your control system runs on 5V and requires higher current switching, the SIP-1A05 is the appropriate choice.

Geboldt Glass Switches: Configuration and Accessories

Both Geboldt options are 3-pin glass reed switches with a 2.5mm diameter and 14mm glass length. The primary difference is the configuration and included accessories. The first option is listed as normally open or normally closed, while the second is specifically SPDT and includes ten magnet pieces.

The SPDT version with magnets is more convenient for testing and prototyping, as it provides the necessary magnetic actuation components in the same package.

Excel Cell vs Aleph: Contact Voltage and Response

The Excel Cell EDR2D1A0500Z is a through-hole relay with a 5V coil and 0.5A contact rating, featuring a 100V DC contact voltage. The Aleph SIL4 relay is a PCB mount unit with a 5V coil and 1A switching rating, with a documented 1ms response time.

The Excel Cell offers a higher contact voltage tolerance, while the Aleph offers a higher current rating and a specified response time. Choose based on whether contact voltage or switching speed is the critical parameter for your application.

Buying Guide

Match Coil Voltage to Control Signal

The coil voltage determines the voltage required to activate the relay. Most options here are 5V DC, which is standard for microcontrollers and logic circuits. Ensure your control signal matches the coil voltage to ensure reliable activation. Mismatched voltages can lead to incomplete switching or damage to the coil.

Select Contact Rating for Load

The contact rating indicates the maximum current the relay can switch. Ratings in this set range from 0.25A for glass switches to 1A for SIP and SIL packages. If your load draws more current than the contact rating, the relay may fail. For low-power signal switching, the 0.5A or 1A ratings are sufficient.

For higher loads, you may need a different type of switch, such as tactile switches or solid-state relays.

Choose Package Type for Mounting

The physical package determines how the relay is mounted. SIP and SIL packages are designed for PCB mounting, while through-hole components are soldered directly into the board. Glass reed switches are often used in sensors or small assemblies. Consider your assembly method and space constraints.

If you are using a USB hubs or other peripheral devices, ensure the relay package fits within the enclosure dimensions.

Consider Contact Form and Configuration

The contact form defines the switching behavior. SPST-NO (Single Pole Single Throw – Normally Open) is common for simple on/off switching. SPDT (Single Pole Double Throw) allows for changeover switching. Glass switches may be available in NO or NC configurations. Choose the form that matches your circuit logic.

For example, a normally open contact closes when the coil is energized, while a normally closed contact opens when energized.

Frequently Asked Questions

What is the difference between SIP and SIL packages?

SIP stands for Single In-line Package, while SIL stands for Small In-line Package. Both are designed for PCB mounting. The specific dimensions and pin spacing may vary between manufacturers, so check the datasheet for your specific model to ensure compatibility with your board layout.

Can I use a 5V relay with a 12V control signal?

No, you should not use a 5V relay with a 12V control signal. Exceeding the coil voltage rating can damage the relay coil. Use a relay with a coil voltage that matches your control signal, or use a current-limiting resistor if you must use a higher voltage source.

What does SPST-NO mean?

SPST-NO stands for Single Pole Single Throw – Normally Open. This means the relay has one input and one output, and the circuit is open (not connected) when the relay is not energized. When the coil is energized, the circuit closes (connects).

Are glass reed switches suitable for high-current applications?

Glass reed switches typically have lower current ratings, often around 0.25A to 0.5A. They are best suited for low-power signal switching or sensing applications. For higher current loads, consider a reed relay with a higher contact rating, such as the 1A SIP or SIL packages.

Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API

Was this article helpful?

Thanks for your feedback!

Thanks — we'll work to improve this article.

Kylan Shields

Kylan Shields

Kylan Shields is the editorial byline of Tossions. Comparisons published under this name are compiled from Amazon listing data (specifications, customer ratings and availability), not from hands-on testing.