Selecting the right resistor array depends on whether you need pre-wired networks or discrete chip resistors. The options here range from SIP packages with shared busses to isolated SMD networks and individual 1206 chips. Each format serves a different circuit design need, from compact space-saving to flexible precision placement.
This comparison looks at four distinct products, focusing on package type, resistance values, and power ratings. By understanding the differences between bussed, isolated, and discrete configurations, you can choose the component that best fits your specific PCB layout and electrical requirements.
Our pick: Electronics-Salon Thick Film Network Resistor Assortment Kit. The Electronics-Salon kit offers SIP-5 and SIP-9 packages with multiple resistance values, ideal for experimenting with different network configurations.
Our 3 picks for different needs
Electronics-Salon Thick Film Network Resistor Assortment Kit
The Electronics-Salon kit offers SIP-5 and SIP-9 packages with multiple resistance values, ideal for experimenting with different network configurations.
Read the details
16-Pin 220 Ohm Isolated Low Profile Resistor Network (5 Pack)
The 5-pack of 16-pin isolated networks provides consistent 220-ohm components for projects requiring multiple identical low-profile arrays.
Read the details
Aexit 200-Piece 1206 4.7K Ohm SMD Chip Resistor Pack
The Aexit 1206 resistors offer a 1/4W rating and +/-1% tolerance, suitable for high-power or precision discrete circuit designs.
Read the detailsAll products, in detail
Electronics-Salon Thick Film Network Resistor Assortment Kit
This assortment kit provides thick film network resistors in both SIP-5 and SIP-9 packages, offering a range of resistance values from 470 ohms to 47K ohms. The bussed circuit type allows for shared connections, which is useful for specific circuit topologies. With a 1/8W power rating and +/-5% tolerance, it suits low-power applications where a variety of values is needed in a single package.
It is a practical choice for hobbyists or engineers who need multiple SIP configurations without buying separate packs.
- Includes SIP-5 and SIP-9 packages with values from 470 to 47K ohms
- Features a bussed circuit type with 1/8W power rating and +/-5% tolerance
16-Pin 220 Ohm Isolated Low Profile Resistor Network
This product is a 16-pin resistor network array with a 220-ohm resistance value. It is designed with an isolated circuit type and a low profile form factor, making it suitable for space-constrained surface mount applications. The listing does not specify the quantity or power rating, so buyers should verify these details against the live product card.
It is a straightforward option for those needing a specific isolated network configuration in a compact footprint.
- 16-pin isolated resistor network with 220-ohm value
- Low profile design for compact surface mount layouts
16-Pin 220 Ohm Isolated Low Profile Resistor Network (5 Pack)
Similar to the single-unit option, this listing provides a 16-pin isolated resistor network with a 220-ohm value in a low profile package. The key distinction is that it includes five pieces, which is beneficial for projects requiring multiple identical networks or for spares. The isolated type ensures that the resistors within the network are not shared, providing independent paths.
This multi-pack format is ideal for batch production or larger hobby projects where consistency across units is required.
- Contains five 16-pin isolated resistor networks
- 220-ohm value with low profile isolated design
Aexit 200-Piece 1206 4.7K Ohm SMD Chip Resistor Pack
The Aexit pack contains 200 individual 1206 size SMD chip resistors, each with a 4.7K ohm value and 1/4W power rating. The 1206 package measures 3.2 x 1.6 mm, offering a standard footprint for surface mount technology. With a tight +/-1% tolerance, these resistors are suitable for precision circuits.
Unlike the network arrays, these are discrete chip resistors, providing flexibility for custom circuit designs where individual values are placed rather than pre-wired networks.
- 200 pieces of 1206 size SMD resistors with 4.7K ohm value
- 1/4W power rating with +/-1% tolerance and 3.2 x 1.6 mm dimensions
Head-to-Head Comparisons
Electronics-Salon SIP Kit vs Aexit 1206 Chips
The Electronics-Salon kit provides SIP-5 and SIP-9 network resistors, which are useful when you need multiple resistors connected to a common bus in a single package. In contrast, the Aexit pack contains individual 1206 SMD chip resistors, offering maximum flexibility for custom circuit layouts where each resistor is placed independently.
The SIP kit is better for reducing component count in specific topologies, while the discrete chips allow for precise placement and easier replacement of single units. Choose the SIP kit for integrated network designs and the Aexit chips for flexible, discrete circuit building.
Single 16-Pin Network vs 5-Pack Isolated Array
Both the single 16-pin network and the 5-pack offer the same 220-ohm isolated low profile design. The primary difference is quantity: the single unit is suitable for one-off repairs or small prototypes, while the 5-pack provides a small batch for larger projects or spares. Since the electrical specifications appear identical, the decision comes down to how many units you need for your current project.
If you are building a multi-board system, the 5-pack ensures consistency across all units without needing to source them separately.
Bussed SIP Networks vs Isolated SMD Arrays
The Electronics-Salon kit features bussed resistors, meaning some pins are connected internally, which is useful for specific circuit functions like pull-up or pull-down networks. The 16-pin isolated network, however, has no internal connections between resistors, providing independent paths for each resistor. This distinction is critical for circuit design: use the bussed SIP for shared reference points and the isolated array for independent signal conditioning.
The SIP kit also offers a wider range of resistance values, whereas the isolated array is fixed at 220 ohms.
Buying Guide
Understanding Package Types
Resistor arrays come in SIP (Single In-line Package) and SMD (Surface Mount Device) formats. SIP packages like the SIP-5 and SIP-9 are through-hole components, while SMD arrays are surface mount. The choice depends on your PCB manufacturing process. Through-hole SIPs are easier to hand-solder and inspect, whereas SMD arrays save space and are ideal for automated assembly.
Consider your soldering capabilities and board density when selecting between these two physical forms.
Bussed vs Isolated Circuits
The internal wiring of a resistor network is defined as either bussed or isolated. In a bussed network, some resistors share a common pin, which is useful for creating pull-up or pull-down networks. In an isolated network, each resistor is independent, allowing for separate signal paths.
This distinction is crucial for circuit functionality. If your design requires shared connections, choose a bussed type; if you need independent resistors, select an isolated array to avoid unintended electrical connections.
Power Rating and Tolerance
Power rating indicates how much heat a resistor can dissipate, while tolerance defines the accuracy of the resistance value. The Aexit 1206 chips have a 1/4W rating and +/-1% tolerance, suitable for higher power or precision needs. The Electronics-Salon SIPs are rated at 1/8W with +/-5% tolerance, which is standard for low-power logic circuits.
Always match the power rating to your circuit's current draw to prevent overheating, and select the tolerance based on the precision required by your application.
Quantity and Value Variety
Consider whether you need a single value or a variety of resistances. The Electronics-Salon kit offers multiple values from 470 to 47K ohms, which is great for prototyping different circuits. The Aexit pack and the 16-pin networks offer a single value (4.7K and 220 ohms respectively).
If you are building a specific circuit that requires many identical resistors, a multi-pack of a single value is efficient. If you are experimenting, an assortment kit saves time by providing a range of options in one package.
Frequently Asked Questions
What is the difference between SIP and SMD resistor arrays?
SIP arrays are through-hole components with pins that go through the PCB, while SMD arrays are surface mount components that sit on the board surface. SIPs are generally easier to hand-solder and inspect, whereas SMDs save space and are better for automated assembly and high-density boards.
Can I use a bussed resistor network for isolated circuits?
No, a bussed network has internal connections between resistors, which may not be suitable for isolated circuits that require independent paths. If your design needs isolated resistors, you must use an isolated network or discrete resistors to avoid unintended electrical connections between signal lines.
What does the 1206 size code mean for SMD resistors?
The 1206 size code refers to the physical dimensions of the SMD resistor, which is approximately 3.2 mm by 1.6 mm. This is a standard size for surface mount resistors, offering a balance between power handling capability and board space. It is larger than smaller codes like 0805 but smaller than through-hole components.
How many resistors are in a SIP-5 package?
A SIP-5 package contains five resistors in a single in-line package. The number in the name refers to the count of resistors, not the number of pins. This configuration is useful for creating compact networks where multiple resistors share a common bus or are arranged in a specific pattern.
This article is part of our complete guide Electronics — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
