Selecting the correct retaining compound depends on the specific mechanical and environmental demands of your assembly. These eight products are designed to lock cylindrical metal components in place, preventing loosening, wear, and corrosion. The primary differences lie in viscosity, strength, and specific tolerances for heat or oil exposure.
Understanding these distinctions helps you avoid over-specifying or under-specifying the adhesive for your task. Whether you are replacing set screws or securing a shaft in a high-heat environment, the right compound ensures stability and longevity. This guide compares the documented features of these eight options to help you make an informed choice.
Our pick: Loctite 620 50ml Retaining Compound. Loctite 620 is specified for high-temperature applications with a shear strength over 3,800 PSI on steel.
Our 3 picks for different needs
Loctite 620 50ml Retaining Compound
Loctite 620 is specified for high-temperature applications with a shear strength over 3,800 PSI on steel.
Read the details
Loctite 680 50ml Retaining Compound
Loctite 680 allows relaxed machining tolerances and replaces clamp rings, set screws, and snap rings.
Read the details
Henkel Loctite 603 50ml Retaining Compound
Henkel Loctite 603 is explicitly described as oil tolerant, making it suitable for lubricated assemblies.
Read the detailsAll products, in detail
Loctite 620 50ml Retaining Compound
This Loctite 620 retaining compound is designed for high-temperature applications involving cylindrical metal parts. It features a high viscosity that helps prevent the compound from running during application. The product lists a shear strength of over 3,800 PSI on steel, making it suitable for assemblies that experience significant thermal stress.
This specific variant is often selected when standard room-temperature compounds might soften under heat. It provides a secure lock for shafts and bearings in demanding environments.
- High viscosity formulation
- Shear strength over 3,800 PSI on steel
Henkel Loctite 609 50ml Retaining Compound
The Henkel Loctite 609 is a general-purpose liquid retaining compound made from acrylic material. It is designed to keep metal parts in place and is suitable for a wide range of applications. The green color allows for easy visual confirmation of application coverage. This compound is typically used for standard cylindrical assemblies where extreme heat or maximum strength is not the primary requirement.
It offers a durable and long-lasting bond for general industrial maintenance tasks. The 50ml bottle provides a convenient quantity for spot repairs or small batch assemblies.
- General purpose acrylic material
- Green color for easy application
Loctite 638 50ml Retaining Compound
Loctite 638 is a high-strength retaining compound available in a 50ml bottle. It is specifically noted for its approval by the Canadian Food Inspection Agency (CFIA), which may be relevant for certain food-grade or regulated industrial environments. The package dimensions are compact, measuring approximately 6 inches in length.
This product is intended for applications requiring a robust bond between cylindrical components. The CFIA approval distinguishes it from standard industrial compounds that may not meet specific regulatory inspection standards.
- CFIA approved
- High strength formulation
Loctite 680 50ml Retaining Compound
Loctite 680 is a high-strength, high-viscosity room temperature curing adhesive used to join fitted cylindrical parts. It allows for relaxed machining tolerances, effectively replacing the need for clamp rings, set screws, and snap rings. This makes it a practical choice for assemblies where mechanical fasteners are difficult to install or remove.
It is recommended for retaining shafts, gears, and pulleys. The high viscosity helps control the flow of the compound during application. This product is designed to provide a secure, permanent bond for cylindrical metal components in industrial machinery.
- Replaces clamp rings and set screws
- High viscosity room temperature curing
ESKONKE 638 50ml Retaining Compound
ESKONKE 638 is a high-strength retaining compound designed for smooth, unthreaded cylindrical metal assemblies. It helps reduce precision requirements in design and production while preventing assembly loosening and wear. The compound cures within 60 minutes and reaches full usability after 24 hours. It is compatible with a wide range of metals, including iron, copper, brass, steel, stainless steel, and aluminum.
The product is intended for applications such as rotor shafts, cylinder liners, and valve bushings. It provides a secure lock and seal, extending the safe use life of the equipment.
- Reduces precision requirements
- Compatible with stainless steel and aluminum
Henkel Loctite 603 50ml Retaining Compound
The Henkel Loctite 603 is a high-strength retaining compound that is oil tolerant. This feature is significant for applications where the assembly may be exposed to lubricants or oils that could otherwise interfere with the curing process. It is designed to provide a secure bond for cylindrical metal parts in industrial settings.
The product is identified by the part number 231099. This variant is suitable for buyers who need a strong bond in environments where oil contamination is a potential factor during assembly or operation.
- Oil tolerant formulation
- High strength bond
ESKONKE 648 50ml Retaining Compound
The ESKONKE 648 is a high-strength sleeve retainer designed for smooth, unthreaded cylindrical metal assemblies. It is formulated to fill voids, reduce precision requirements, and prevent loosening, wear, and corrosion. The compound cures within 60 minutes of assembly and is ready for normal use after 24 hours.
It is suitable for active and inert metals, including iron, copper, brass, steel, stainless steel, and aluminum. Disassembly requires heating to 250 degrees Celsius and mechanical assistance. This product is ideal for keys, shafts, bearings, and valve sleeves where high shear strength is needed.
- Cures in 60 minutes, full strength in 24 hours
- Disassembly requires 250C heat
ESKONKE 620 50ml Retaining Compound
The ESKONKE 620 is a high-strength sleeve retainer for cylindrical metal components. It functions to fill gaps, lock components, and prevent abrasion and corrosion. The compound isolates oxygen to prolong product life and evenly distributes loads and stresses. It is applicable to all solid metals, including those with active and inert surfaces.
The product cures within 60 minutes and is usable after 24 hours. Disassembly requires heating to 250 degrees Celsius. This variant is suitable for keys, shafts, bearings, and bushings, offering a robust solution for locking and sealing applications.
- Seals against oxygen and contaminants
- Suitable for active and inert metals
Head-to-Head Comparisons
Loctite 620 vs Loctite 609: Heat vs General Use
Loctite 620 and Loctite 609 serve different primary functions. The 620 is explicitly labeled for high-temperature applications and lists a shear strength of over 3,800 PSI on steel. It is a high-viscosity compound, which helps control flow during application. In contrast, the 609 is described as a general-purpose liquid retaining compound made from acrylic material.
It is suitable for a wide range of standard applications where extreme heat is not a factor. If your assembly operates in a high-heat environment, the 620 is the documented choice. For standard room-temperature maintenance where general durability is needed, the 609 is appropriate.
Loctite 680 vs ESKONKE 648: Fastener Replacement vs High Strength
Loctite 680 and ESKONKE 648 both offer high strength but with different emphases. Loctite 680 is highlighted for its ability to replace mechanical fasteners like clamp rings and set screws, allowing for relaxed machining tolerances. It is a high-viscosity, room-temperature curing adhesive. ESKONKE 648 is described as having a shear strength comparable to 0.2 C Steel and is designed for smooth, unthreaded cylindrical assemblies.
It requires heating to 250 degrees Celsius for disassembly. Choose Loctite 680 if you need to eliminate mechanical fasteners. Choose ESKONKE 648 if you require a bond with steel-comparable strength for heavy-duty locking.
Henkel Loctite 603 vs ESKONKE 620: Oil Tolerance vs Curing Time
Henkel Loctite 603 and ESKONKE 620 address different environmental challenges. The Loctite 603 is specifically noted as oil tolerant, which is critical for assemblies exposed to lubricants that might inhibit curing. The ESKONKE 620 is a high-strength sleeve retainer that cures within 60 minutes and is usable after 24 hours.
It is suitable for all solid metals, including active and inert surfaces. If your application involves oil or lubricants, the 603 is the documented fit. If you need a fast-curing, high-strength bond for general metal assemblies, the ESKONKE 620 is a strong option.
Buying Guide
Understanding Viscosity and Flow
Viscosity determines how the compound flows during application. High-viscosity compounds, like Loctite 620 and 680, are thicker and less likely to run down the sides of a shaft during installation. This makes them easier to control in vertical or awkward orientations. Lower viscosity compounds may flow more easily into tight gaps but require more careful handling.
When selecting a compound, consider the orientation of your assembly and the size of the gap you need to fill. Check the product description for viscosity ratings to ensure it matches your application needs.
Selecting for Temperature and Environment
The operating environment significantly impacts compound performance. Loctite 620 is explicitly designed for high-temperature applications. If your machinery operates in hot conditions, a standard compound may soften or fail. Conversely, Henkel Loctite 603 is oil tolerant, making it suitable for lubricated environments. For food-grade or regulated industries, Loctite 638 offers CFIA approval.
Always match the compound's environmental tolerances to your specific operating conditions. If you are unsure, consult the technical data sheet for the specific temperature and chemical resistance ratings.
Strength and Disassembly Requirements
Consider whether the assembly needs to be permanent or serviceable. ESKONKE products like the 648 and 620 require heating to 250 degrees Celsius and mechanical assistance for disassembly. This indicates a very strong, near-permanent bond. Loctite 680 replaces mechanical fasteners, suggesting a strong bond that may be easier to service than some high-strength anaerobics.
If you anticipate needing to disassemble the parts in the future, choose a compound with documented disassembly procedures. If the assembly is intended to be permanent, a high-strength compound with high shear resistance is appropriate.
Compatibility with Metal Types
Not all metals react the same way to anaerobic adhesives. ESKONKE compounds are noted as suitable for both active metals like iron and copper, and inert metals like stainless steel and aluminum. Inert metals may require a primer or activator to cure properly, though this is not explicitly detailed in the provided features.
Loctite compounds are generally designed for a wide range of metals. When working with inert surfaces, verify if a primer is needed. For active metals, standard application is usually sufficient. Ensure the compound is compatible with the specific metal alloys in your assembly to guarantee proper curing and bond strength.
Frequently Asked Questions
What is the difference between retaining compounds and sealants?
Retaining compounds are designed to lock cylindrical parts in place, preventing relative motion. Sealants are designed to prevent fluid or gas leakage. While some compounds offer sealing properties, their primary function is mechanical retention. If your primary goal is to stop a leak, a sealant may be more appropriate.
If your goal is to prevent a shaft from rotating or moving axially, a retaining compound is the correct choice.
How long does it take for these compounds to cure?
Curing times vary by product. ESKONKE compounds state they start curing within 60 minutes and are usable after 24 hours. Other products do not specify exact curing times in the provided data. Always refer to the manufacturer's technical data sheet for specific cure times and handling strength.
Full chemical strength may take longer than the initial handling time.
Can I use these compounds on non-metal surfaces?
The provided data specifies that these compounds are suitable for solid metals, including iron, copper, brass, steel, stainless steel, and aluminum. They are anaerobic adhesives, which cure in the absence of air on active metal surfaces. They are not typically recommended for plastics, rubber, or other non-metallic materials unless specifically stated by the manufacturer.
Check the compatibility list for your specific application.
Do I need a primer for inert metals?
The provided data mentions compatibility with inert metals like stainless steel and aluminum but does not explicitly state if a primer is required. In general, anaerobic adhesives may cure slower on inert surfaces. If you are working with stainless steel or aluminum, it is advisable to check the manufacturer's recommendations for primers or activators to ensure proper curing and bond strength.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
