Selecting the correct roller chain coupling requires matching the shaft bore, keyway dimensions, and chain size to your specific mechanical setup. These components are critical for transmitting power between shafts, often accommodating slight misalignments while maintaining smooth operation.
The options here include sintered steel sprocket halves from Martin and ANSI standard carbon steel chains. By identifying your shaft diameter and required chain pitch, you can narrow down the appropriate coupling half and its corresponding chain to ensure a secure and efficient connection.
Our pick: Martin 4016 Roller Chain Coupling, 1" Bore. This Martin coupling is specified for a 1-inch bore and supports up to 5000 rpm.
Our 3 picks for different needs
Martin 4016 Roller Chain Coupling, 1" Bore
This Martin coupling is specified for a 1-inch bore and supports up to 5000 rpm.
Read the details
4016C Coupling Chain, ANSI Carbon Steel
This ANSI carbon steel chain is sized #40 with a 0.5-inch pitch for standard couplings.
Read the details
Martin 5018 Roller Chain Coupling, 1 7/16" Bore
This Martin model features an 18-tooth design and a larger 1 7/16-inch bore for heavier shafts.
Read the detailsAll products, in detail
Martin 4016 Roller Chain Coupling, 1" Bore
This Martin simplex sprocket coupling half is designed for joining two perpendicular shafts. Constructed from sintered steel with hardened teeth, it offers resistance to wear and fatigue. The 1-inch bore and 1/4-inch by 1/8-inch keyway make it suitable for specific shaft sizes. It accommodates up to 2 degrees of angular misalignment.
Buyers needing a 5000 rpm max rotational speed in a 16-tooth configuration should consider this model.
- Sintered steel construction with hardened teeth
- 1-inch bore with 1/4-inch by 1/8-inch keyway
5016C Coupling Chain, ANSI Carbon Steel
This #50 chain is made from ANSI standard carbon steel for strength and durability. It features a 0.625-inch pitch and consists of 16 links. It is intended for use with taper-lock bushed, QD bushed, stock bore, and finished bore roller-chain style couplings, which are sold separately.
This component is essential for buyers who already have the coupling halves and need the connecting chain to complete the assembly.
- Chain size #50 with 0.625-inch pitch
- Compatible with taper-lock and QD bushed couplings
DOPZNJWF KC4012 Chain Coupling
The DOPZNJWF KC4012 is a flexible chain coupling designed to adapt to various transmission needs. It aims to improve the smoothness of operation and provide efficient torque transmission. The listing highlights its wide range of applications across different mechanical equipment and working conditions. This option is suitable for buyers seeking a versatile coupler that can handle diverse mechanical setups.
- Flexible design for various transmission needs
- Model KC4012 with 19×19 dimensions
Martin 5018 Roller Chain Coupling, 1 7/16" Bore
This Martin simplex sprocket coupling half features an 18-tooth design and a 1 7/16-inch bore. It is built from sintered steel with hardened teeth to resist wear and fatigue. The 3/8-inch by 3/16-inch keyway prevents rotation between elements. With a max rotational speed of 3600 rpm, it is suited for applications requiring larger shaft diameters than the 4016 model.
It accommodates up to 2 degrees of angular misalignment.
- 1 7/16-inch bore with 3/8-inch by 3/16-inch keyway
- Max rotational speed of 3600 rpm
4016C Coupling Chain, ANSI Carbon Steel
This #40 chain is manufactured from ANSI standard carbon steel, ensuring strength and durability. It has a 0.5-inch pitch and includes 16 links. Like its larger counterpart, it is for use with taper-lock bushed, QD bushed, stock bore, and finished bore roller-chain style couplings sold separately.
This is the correct chain size for buyers pairing with #40 sprocket couplings to ensure proper meshing and transmission.
- Chain size #40 with 0.5-inch pitch
- ANSI standard carbon steel material
Martin 4016 Roller Chain Coupling, 1 1/4" Bore
This Martin simplex sprocket coupling half is similar to the 1-inch bore version but features a 1 1/4-inch bore. It uses sintered steel with hardened teeth for durability. The 1/4-inch by 1/8-inch keyway is identical to the smaller bore variant. It supports a max rotational speed of 5000 rpm and accommodates up to 2 degrees of angular misalignment.
This is the choice for shafts requiring a slightly larger diameter within the 4016 series.
- 1 1/4-inch bore with 1/4-inch by 1/8-inch keyway
- 5000 rpm max rotational speed
Head-to-Head Comparisons
Martin 4016: 1-inch vs 1 1/4-inch Bore
Both the Martin 4016 couplings feature 16 teeth, sintered steel construction, and a 5000 rpm max speed. The primary difference is the bore size. The 1-inch bore version is for shafts of that exact diameter, while the 1 1/4-inch bore version fits larger shafts. Both use a 1/4-inch by 1/8-inch keyway.
Buyers must measure their shaft diameter precisely to choose between these two variants, as the keyway size remains constant despite the bore difference.
#40 vs #50 Coupling Chains
These two chains differ in size and pitch. The #40 chain has a 0.5-inch pitch, while the #50 chain has a 0.625-inch pitch. Both are made from ANSI standard carbon steel and consist of 16 links. The choice depends entirely on the sprocket coupling halves you are using.
A #40 sprocket requires the #40 chain, and a #50 sprocket requires the #50 chain. Mixing these sizes will prevent proper meshing and transmission.
Martin 4016 vs 5018 Speed and Size
The Martin 4016 and 5018 couplings differ in tooth count, bore size, and speed rating. The 4016 has 16 teeth and a 5000 rpm max speed, while the 5018 has 18 teeth and a 3600 rpm max speed. The 5018 also features a larger 1 7/16-inch bore compared to the 4016's 1-inch or 1 1/4-inch options.
If your application requires higher rotational speeds, the 4016 is the suitable choice. If you need a larger bore and can operate at lower speeds, the 5018 is the appropriate selection.
Buying Guide
Match the Shaft Bore
The bore diameter must match your shaft exactly. The Martin 4016 is available in 1-inch and 1 1/4-inch bores, while the 5018 is available in a 1 7/16-inch bore. Measure your shaft diameter before selecting a coupling half. Using a coupling with a bore that is too large or too small will prevent proper installation and secure attachment to the shaft.
Verify Keyway Dimensions
The keyway prevents rotation between the coupling and the shaft. The Martin 4016 models use a 1/4-inch by 1/8-inch keyway, while the 5018 uses a 3/8-inch by 3/16-inch keyway. Ensure your shaft has a keyway that matches these dimensions. A mismatched keyway will not allow the coupling to lock onto the shaft, leading to slippage and potential failure during operation.
Select the Correct Chain Size
If you are purchasing separate chains, ensure the chain size matches the sprocket coupling. The #40 chain has a 0.5-inch pitch, and the #50 chain has a 0.625-inch pitch. These chains are compatible with taper-lock, QD, stock, and finished bore couplings. Selecting the wrong chain size will result in the chain not fitting onto the sprocket teeth, making the assembly non-functional.
Consider Rotational Speed Limits
Each coupling has a maximum rotational speed. The Martin 4016 supports up to 5000 rpm, while the 5018 supports up to 3600 rpm. Determine the operating speed of your machinery. If your application exceeds the max speed of a coupling, it may not perform safely or effectively.
Choose a coupling with a speed rating that exceeds your maximum operating speed to ensure longevity and safety.
Frequently Asked Questions
Are the coupling chains sold with the sprockets?
No, the chains are sold separately. The listings for the #40 and #50 chains specify that they are for use with roller-chain style couplings that are sold separately. You must purchase the sprocket halves and the chain individually to complete the assembly.
What material are the Martin couplings made from?
The Martin couplings are made from sintered steel. This material is chosen for its strength and hardness. The teeth are also hardened to provide resistance to wear and fatigue, ensuring the coupling can handle the demands of continuous mechanical operation.
Can these couplings handle shaft misalignment?
Yes, the Martin couplings accommodate up to 2 degrees of angular misalignment between shafts. This flexibility helps absorb minor alignment errors in the machinery, reducing stress on the bearings and shafts while maintaining smooth power transmission.
What is the difference between #40 and #50 chains?
The primary difference is the pitch. The #40 chain has a 0.5-inch pitch, while the #50 chain has a 0.625-inch pitch. This size difference means they are not interchangeable. You must select the chain size that corresponds to the specific sprocket coupling model you are using.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
