Selecting the right sample and hold amplifier depends on your package requirements and specific circuit needs. The options in this comparison range from single-circuit DIP packages to quad configurations and surface-mount variants.
Each product serves a different design constraint, whether you need the traditional LF398 in a through-hole format or the AD783 in a small outline package. Reviewing the specific part numbers and package types will help you match the component to your board layout and assembly process.
Our 3 picks for different needs
Major Brands LF398N Pack of 4
This pack of four includes a specified 20 microsecond acquisition time, which is useful for planning sampling rates during development.
Read the details
AVLIS-CO AD783JR 8SOIC
The 8SOIC package of the AD783JR is suitable for modern PCB layouts that require compact surface-mount components.
Read the details
AVLIS-CO LF398N/NOPB 8DIP
The LF398N/NOPB in 8DIP offers a lead-free option for projects that require RoHS compliance in a through-hole format.
Read the detailsAll products, in detail
AVLIS-CO LF398N 8DIP
This single-circuit sample and hold amplifier is supplied in an 8-pin DIP package. The LF398N designation indicates a specific variant of the classic sample and hold architecture. It is suitable for through-hole prototyping or legacy board designs that require this specific pinout. The listing identifies it as a 1-circuit device, making it a straightforward component for basic analog signal conditioning tasks where DIP mounting is preferred.
- 8DIP package
- 1 Circuit
Mono Quad Sample & Hold IC
This integrated circuit is described as a mono quad sample and hold amplifier. The quad designation suggests it contains multiple channels within a single package, which can simplify board layout for multi-channel applications. Unlike the single-circuit options in this list, this variant may offer higher channel density.
It is a general-purpose IC for designers who need sample and hold functionality in a quad configuration.
- Mono Quad configuration
- Integrated Circuit
AVLIS-CO AD783JR 8SOIC
The AD783JR is a sample and hold amplifier provided in an 8-SOIC package. This surface-mount format is ideal for modern PCB designs that require compact footprints. The AD783 series is a well-known part number in analog electronics. This specific listing from AVLIS-CO offers the 1-circuit version in a small outline integrated circuit package, suitable for automated assembly lines.
- 8SOIC package
- AD783JR model
AVLIS-CO LF398N/NOPB 8DIP
This listing specifies the LF398N/NOPB part number in an 8DIP package. The /NOPB suffix typically denotes a lead-free or RoHS-compliant version of the component. It is a single-circuit sample and hold amplifier designed for through-hole mounting. This variant is suitable for projects requiring RoHS compliance while maintaining the traditional DIP form factor for easy hand soldering or testing.
- RoHS compliant
- 8DIP package
Major Brands LF398N Pack of 4
This product is a pack of four LF398N sample and hold amplifiers. It features a 20 microsecond acquisition time and uses a dual power supply. The components are in an 8-pin MDIP rail format. This multi-pack is useful for prototyping or small-batch production where multiple units are needed.
The specified acquisition time helps designers plan their sampling rates for the circuit.
- 20µs acquisition time
- Pack of 4
AVLIS-CO LF398S8#PBF 8-SO
The LF398S8#PBF is a sample and hold amplifier in an 8-SO package. The #PBF suffix indicates a lead-free finish, aligning with environmental regulations. This is a single-circuit device suitable for surface-mount applications. It offers the LF398 functionality in a smaller footprint than the DIP variants, making it a good choice for space-constrained designs that require this specific part number.
- 8-SO package
- Lead-free finish
AD783JRZ SOP8
This listing offers the AD783JRZ sample and hold amplifier in a SOP8 package. It is described as a genuine electronic component with stable performance. The SOP8 format is a standard surface-mount package. This single unit is suitable for designers who need the AD783 precision in a compact form factor.
The listing emphasizes reliability and ease of installation for various electronic applications.
- SOP8 package
- AD783JRZ model
Head-to-Head Comparisons
LF398N DIP vs AD783JR SOIC
The AVLIS-CO LF398N is provided in an 8DIP package, which is ideal for through-hole mounting and hand soldering. In contrast, the AVLIS-CO AD783JR is in an 8SOIC package, designed for surface-mount technology. The choice between these two depends on your assembly method. If you are prototyping on a breadboard or using through-hole PCBs, the DIP version is easier to handle.
If you are designing a modern PCB for automated assembly, the SOIC version saves space. Both are single-circuit devices, but the package form factor is the primary differentiator.
LF398N Pack of 4 vs LF398N/NOPB
Both of these products feature the LF398N model in an 8DIP package. The Major Brands listing is a pack of four and specifies a 20 microsecond acquisition time and dual power supply. The AVLIS-CO listing is a single unit with a /NOPB suffix, and the title indicates it is RoHS compliant.
If you need multiple units for a project, the pack of four is convenient. If you require a specific RoHS-compliant part number for a single unit, the AVLIS-CO option is appropriate. The acquisition time is explicitly documented for the pack of four, which is a useful specification for timing calculations.
Mono Quad vs LF398S8 Single
The Mono Quad sample and hold IC is described as a quad configuration, suggesting multiple channels in one package. The AVLIS-CO LF398S8#PBF is a single-circuit device in an 8-SO package. If your application requires multiple sample and hold channels, the quad version may reduce the number of components needed on the board.
If you only need one channel, the single-circuit LF398S8 is sufficient. The package types differ, with the quad likely being a different physical form factor than the 8-SO single. This distinction is important for board layout planning.
Buying Guide
Package Type Selection
The physical package of the IC determines how it is mounted on your circuit board. DIP packages are through-hole components, which are easier to solder by hand and suitable for prototyping. SOIC and SOP packages are surface-mount components, which are smaller and better suited for automated assembly and high-density boards.
Choose DIP if you are building a prototype or using a breadboard. Choose SOIC or SOP if you are designing a production PCB that requires compact components.
Channel Count Requirements
Some sample and hold amplifiers are single-circuit, while others are quad or multi-channel. A single-circuit IC is sufficient for applications that only need to sample and hold one signal. A quad IC contains multiple channels, which can simplify the design if you need to process several signals simultaneously.
Check the product title for terms like '1 Circuit' or 'Quad' to determine the channel count. Matching the channel count to your application needs avoids unnecessary complexity or cost.
Acquisition Time Specifications
Acquisition time is the time it takes for the amplifier to settle to the input voltage after the sample command. This specification is critical for determining the maximum sampling rate of your system. Some listings, like the Major Brands LF398N pack, explicitly state the acquisition time as 20 microseconds.
If your application requires high-speed sampling, verify that the acquisition time meets your requirements. If the acquisition time is not listed, you may need to consult the manufacturer's datasheet for that specific part number.
Compliance and Suffixes
Part number suffixes often indicate compliance with environmental regulations or specific manufacturing standards. For example, the /NOPB suffix on the AVLIS-CO LF398N indicates a lead-free, RoHS-compliant version. The #PBF suffix on the LF398S8 also indicates a lead-free finish. If your project requires RoHS compliance, look for these suffixes in the part number.
This ensures that the component meets the necessary environmental standards for your region or industry.
Frequently Asked Questions
What is the difference between DIP and SOIC packages?
DIP packages are through-hole components with pins that go through the board, making them easy to solder by hand. SOIC packages are surface-mount components that sit on the surface of the board, offering a smaller footprint for modern PCB designs.
What does the /NOPB suffix mean on a part number?
The /NOPB suffix typically indicates that the component is lead-free and compliant with RoHS regulations. This is important for projects that must meet environmental standards for electronic waste and hazardous substances.
How many channels does the Mono Quad IC have?
The title for this product includes the term 'MONO QUAD'. While this designation typically implies a multi-channel configuration, the provided listing data does not explicitly state the exact number of channels. You should verify the specific channel count in the manufacturer's datasheet to ensure it matches your circuit requirements.
Is the acquisition time the same for all LF398N variants?
The acquisition time can vary depending on the specific variant and operating conditions. The Major Brands listing specifies a 20 microsecond acquisition time. Other listings may not specify this value, so you should check the datasheet for the exact part number you are purchasing.
This article is part of our complete guide Electronics — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
