Selecting the right sheet metal screws depends on the head style, material, and size range required for your specific project. Whether you are working on HVAC ductwork, metal roofing, or general fabrication, the fastener's ability to self-tap and its corrosion resistance are critical factors.
This comparison examines eight distinct screw kits, ranging from single-size bulk packs to multi-size assortments. We look at the differences between hex washer heads and truss heads, as well as the material properties of 410 stainless steel and galvanized carbon steel, to help you identify the best fit for your fastening needs.
Our 3 picks for different needs
450-Piece #8 and #10 Hex Head Assortment
This 450-piece kit offers a wide range of #8 and #10 hex head screws in five lengths, suitable for varied sheet metal and mechanical tasks.
Read the details
QSJ 120-Piece #8 x 1/2" Hex Washer Head Screws
The 120-piece box of uniform #8 x 1/2" hex washer head screws is ideal for multi-panel jobs where sorting mixed lengths is unnecessary.
Read the details
mxuteuk 230-Piece #8 Truss Head Kit with Washers
This kit includes rubber washers and 410 stainless steel truss head screws, described as suitable for outdoor or humid environments.
Read the detailsAll products, in detail
VGBUY 150-Piece Self Drilling Screws Assortment
This 150-piece kit includes #8 and #10 self-drilling screws in four lengths, ranging from 1/2 inch to 1-1/2 inch. Made from 410 stainless steel, these fasteners feature a hex washer head and external hex drive to prevent slippage. The drill-bit-shaped tip allows for direct installation without a pilot hole, making them suitable for metal-to-metal, metal-to-wood, and thin metal applications like roofing and HVAC ductwork.
- Includes 60 #8 x 1/2", 40 #8 x 3/4", 30 #10 x 1", and 20 #10 x 1-1/2" screws
- Constructed from 410 stainless steel with a hex washer head
Wensilon 300-Piece #8 x 3/4" Truss Head Screws
This bulk pack of 300 screws features a uniform #8 x 3/4 inch size with a truss head design. The 410 stainless steel material is described as high-strength and corrosion-resistant, with a deep thread design intended to provide good holding power in various materials. The listing notes that the screws are checked for quantity and include an extra cross-drilled tail for each box to accommodate different installation needs.
- Contains 300 #8 x 3/4" truss head self-tapping screws
- Made from 410 stainless steel with a deep thread design
KURUI 125-Piece Galvanized #8 Assortment Kit
This assortment kit offers 125 galvanized carbon steel screws in five #8 sizes: 1/2", 3/4", 1-1/4", 1", and 2". The multi-layer galvanization provides rust and corrosion resistance, while the clear organizer box allows for easy sorting and retrieval. These Phillips truss head screws are designed for firm connections between wood, metal, and plastic in DIY projects.
- Includes 50 #8 x 1/2", 25 #8 x 3/4", 20 #8 x 1-1/4", 20 #8 x 1", and 1 #8 x 2" screws
- Made from carbon steel with multi-layer galvanization
450-Piece #8 and #10 Hex Head Assortment
This large 450-piece kit includes #8 and #10 self-drilling screws in five lengths from 1/2 inch to 1-1/4 inch. The fasteners are made from 410 stainless steel and feature a hex head design. The assortment is stored in a sturdy box with separate compartments for each size, facilitating organization.
The listing highlights the material's higher hardness and corrosion resistance for applications in sheet metal, furniture, and mechanical maintenance.
- Includes 250 #8 screws and 200 #10 screws across five lengths
- Features hex head design and 410 stainless steel construction
QSJ 120-Piece #8 x 1/2" Hex Washer Head Screws
This bulk box contains 120 identical #8 x 1/2 inch (13mm) self-tapping screws with hex washer heads. Made from 410 stainless steel, these fasteners include a screwdriver bit and are designed for joining metal to metal, metal to wood, ductwork, and panels. The uniform size eliminates the need for sorting mixed lengths during multi-panel jobs, and the external hex head ensures a secure fit.
- Contains 120 #8 x 1/2" hex washer head screws
- Includes a screwdriver bit and is made from 410 stainless steel
450-Piece #8 and #10 Truss Head Assortment
This 450-piece assortment includes #8 and #10 self-drilling screws in five lengths from 1/2 inch to 1-1/4 inch. The fasteners are made from 410 stainless steel and feature a truss head design. The kit is packaged in a sturdy box with separate storage for different sizes.
The listing describes the screws as suitable for sheet metal, furniture, floor fixing, and mechanical maintenance, with threads designed to penetrate metal plates easily.
- Includes 250 #8 screws and 200 #10 screws across five lengths
- Features truss head design and 410 stainless steel construction
Wensilon 300-Piece #8 x 3/4" Black Truss Head Screws
This pack of 300 black truss head screws features a uniform #8 x 3/4 inch size. The 410 stainless steel material is described as environmentally friendly, non-toxic, and high-strength. The deep thread design is intended to provide strong holding force in different materials, allowing for direct screwing without installation holes.
The listing notes that the screws are checked for quantity and include an extra cross-drilled tail for each box.
- Contains 300 #8 x 3/4" black truss head screws
- Made from 410 stainless steel with a deep thread design
mxuteuk 230-Piece #8 Truss Head Kit with Washers
This kit includes 115 #8 truss head self-tapping screws and 115 matching rubber washers, totaling 230 pieces. The screws are available in five sizes: 1/2", 5/8", 3/4", 1", and 1-1/4". Made from 410 stainless steel, these fasteners are described as suitable for outdoor or humid environments due to their corrosion resistance.
The cross groove design allows for quick installation, and the kit is stored in a clear plastic box.
- Includes 115 screws in five sizes and 115 rubber washers
- Made from 410 stainless steel with a cross groove design
Head-to-Head Comparisons
Hex Head vs Truss Head in 450-Piece Kits
Both the 450-piece hex head kit and the 450-piece truss head kit offer identical size ranges, including #8 and #10 screws from 1/2 inch to 1-1/4 inch. The primary distinction is the head style: the hex head kit features a standard hex head, while the truss head kit features a truss head.
The hex head design may offer a different profile for tool engagement, whereas the truss head is often used for a lower profile finish. Both are made from 410 stainless steel, so the choice depends on your preferred head shape for the application.
Galvanized Carbon Steel vs 410 Stainless Steel
The KURUI 125-piece kit uses galvanized carbon steel, while the VGBUY 150-piece kit uses 410 stainless steel. The KURUI kit offers a wider size range, including a 2-inch length, and uses a Phillips truss head. The VGBUY kit includes #10 screws and uses a hex washer head.
If you prefer the magnetic properties of 410 stainless steel and a hex drive, the VGBUY kit is a suitable alternative.
Silver vs Black Truss Head Bulk Packs
Both the silver and black Wensilon kits contain 300 #8 x 3/4 inch truss head screws made from 410 stainless steel. The main difference is the finish color: the silver kit has a standard stainless appearance, while the black kit has a black finish. The black finish may be preferred for aesthetic reasons or to match black hardware.
Both listings describe the material as high-strength and corrosion-resistant, with a deep thread design for good holding power. Choose the color that best matches your project's visual requirements.
Buying Guide
Head Style Selection
The head style of a sheet metal screw affects both the tool used and the final appearance. Hex washer heads, found in the VGBUY and QSJ kits, provide a wide bearing surface and are driven with a hex bit. Select the head style that matches your available tools and the desired finish of the fastened joint.
Material and Corrosion Resistance
Most kits in this comparison use 410 stainless steel, which is a magnetic stainless steel known for its strength and corrosion resistance. The KURUI kit uses galvanized carbon steel, which also offers rust resistance through a multi-layer galvanization process. For outdoor or humid environments, the mxuteuk kit specifically highlights its suitability for such conditions.
Check the material specification to ensure it matches the environmental exposure of your project.
Size Range and Quantity
Assortment kits like the VGBUY, KURUI, and 450-piece kits offer multiple lengths, allowing you to handle various thicknesses of material. Bulk packs like the QSJ and Wensilon kits offer a single size in higher quantities, which is efficient for large-scale projects using one specific length.
Determine if you need a variety of lengths for different parts of a project or a large quantity of a single size for a uniform application.
Additional Hardware and Accessories
Some kits include additional hardware to enhance their utility. The mxuteuk kit includes 115 rubber washers, which can provide a seal or cushion between the screw head and the material. The QSJ kit includes a screwdriver bit, ensuring you have the correct tool for installation.
The Wensilon kits include an extra cross-drilled tail for each box. These accessories can save time and ensure proper installation, so consider them when comparing kits.
Frequently Asked Questions
Are 410 stainless steel screws magnetic?
Yes, 410 stainless steel is a magnetic stainless steel. This is noted in the listings for the VGBUY, QSJ, and 450-piece kits. If you require non-magnetic fasteners, you would need to look for 300 series stainless steel, which is not included in this specific comparison.
Do these screws require a pilot hole?
No, these are self-drilling or self-tapping screws. The drill-bit-shaped tip or self-tapping design allows them to penetrate metal without a pre-drilled pilot hole. This feature is highlighted in the VGBUY, QSJ, and mxuteuk listings, saving time during installation.
What is the difference between #8 and #10 screws?
#8 and #10 refer to the diameter of the screw shank. #10 screws are larger in diameter than #8 screws.
Can these screws be used for wood?
Yes, several listings indicate that these screws are suitable for metal-to-wood connections. The VGBUY, KURUI, and QSJ kits explicitly mention use with wood. The self-tapping design allows them to bite into wood as well as metal, making them versatile for mixed-material projects.
This article is part of our complete guide Tools & Home Improvement — browse all our comparisons and buying guides.
Last update on 2026-11-20 / Affiliate links / Images from Amazon Product Advertising API
