Industrial & Scientific

Thermistors: 8 NTC Sensors and Probes Compared for 2026

This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.

Product details come from Amazon listings. Compare the specifications that matter to you, and check the current price and availability on Amazon before buying. How we compare

Selecting the right thermistor depends on the specific resistance value, tolerance, and physical form factor required by your application. Whether you are replacing a sensor in a household appliance, building a PCB, or managing temperature in a 3D printer, the electrical characteristics must match your control circuit.

This comparison covers eight NTC thermistor options, ranging from bulk multi-value kits for engineers to specialized probes for 3D printers and appliances. We focus on documented specifications like B value, accuracy, and housing type to help you identify the correct component for your project.

AT A GLANCE

Our 3 picks for different needs

200Pcs NTC Thermistors Resistor 1K 2K 3K 4.7K 5K 10K 20K 47K 50K 100K ohm | MF52 B 3950 5% Thermal...
02Bulk PCB Prototyping

VANXY 10-Value NTC Thermistor Kit (200 Pcs)

The 200-piece kit with 10 resistance values and SMD-friendly design supports high-density layouts and automated assembly.

Read the details
4Pcs Ender 3 Thermistor 1m/39.4Inches, 3D Printer ohm NTC 100K 3950 Thermistor Temp Sensor...
063D Printer Replacement

TIEXYE 100K NTC 3D Printer Thermistor (4-Pack)

The 100K ohm 3950 thermistors are listed as compatible with Ender 3, Voxelab Aquila, and CR10 printer beds and hotends.

Read the details
VWTNI 5PCS 1M Temperature Sensor Probe 10K, B3950 NTC Thermistor Sensor Probe, High Sensitivity...
05Corrosion-Resistant Appliance Sensor

VWTNI 10K NTC Probe with Nickel-Plated Housing (5-Pack)

The nickel-plated copper housing and 1% accuracy make this probe suitable for humid environments like water dispensers and dishwashers.

Read the details

All products, in detail

PATIKIL NTC Thermistors Resistors, 20Pcs 10K Ohm MF52-103 5% Accuracy High Sensitivity Current...
01

PATIKIL MF52-103 10K NTC Thermistor (20-Pack)

This 20-pack of MF52-103 thermistors offers a 10K ohm resistance at 25°C with 5% accuracy and a B value of 3950. The 2mm head diameter and 28mm pin length make it suitable for small electrical appliances and narrow gaps. It supports a wide operating range from -55°C to 315°C, making it a versatile choice for general temperature measurement in household and industrial equipment.

  • 10K ohm resistance at 25°C with 5% accuracy
  • Operating temperature range of -55°C to 315°C
200Pcs NTC Thermistors Resistor 1K 2K 3K 4.7K 5K 10K 20K 47K 50K 100K ohm | MF52 B 3950 5% Thermal...
02Bulk PCB Prototyping

VANXY 10-Value NTC Thermistor Kit (200 Pcs)

This bulk kit includes 200 thermistors across 10 different resistance values, ranging from 1K to 100K ohms, with 20 pieces of each value. All units feature a B value of 3950 and ±5% tolerance. The SMD/SMT-friendly design supports automated assembly and high-density PCB layouts, making it ideal for engineers, makers, and bulk procurement for power supplies and IoT systems.

  • Includes 10 resistance values from 1K to 100K ohms
  • SMD/SMT-friendly compact form factor for PCB integration
10Pcs 10K NTC Thermistor 3590B 1% NTC Thermistors Resistors Temperature Sensor MF52B, Wire Length...
03

TIEXYE MF52B 10K NTC Thermistor (10-Pack)

This 10-pack features MF52B thermistors with a 10K ohm resistance and a tighter 1% accuracy tolerance. The B value is 3590, and each unit includes 100mm of wire. The operating range spans -50°C to 125°C, suitable for temperature control instruments, air conditioning, and office automation.

The higher precision makes it a good fit for applications requiring stable and accurate readings.

  • 1% measurement accuracy with 3590 B value
  • Includes 100mm wire length for easy installation
KOKISO NTC Glass Sealed NTC Thermistor MF58 3950B 10 Values 100 PCS Kit
04

KOKISO MF58 Glass Sealed NTC Kit (100 Pcs)

This 100-piece kit provides 10 different resistance values, from 1K to 1M ohms, in glass-sealed MF58 packages. Each value is stored in a marked small bag for easy sorting and identification. The glass construction offers small size and large power handling capabilities. It is designed for thermal protection circuits and temperature measurement in various family appliances and industrial equipment.

  • Glass-sealed MF58 package for durability
  • 10 distinct resistance values from 1K to 1M ohms
VWTNI 5PCS 1M Temperature Sensor Probe 10K, B3950 NTC Thermistor Sensor Probe, High Sensitivity...
05Corrosion-Resistant Appliance Sensor

VWTNI 10K NTC Probe with Nickel-Plated Housing (5-Pack)

This 5-pack of 1-meter probes features a nickel-plated copper housing that resists corrosion in humid environments. The 10K ohm thermistor has 1% accuracy and a B value of 3950. It uses an XH 2.54mm 2-pin connector and operates between -30°C and 105°C. The sealed connection and flexible PVC cable make it suitable for water dispensers, refrigerators, and dishwashers.

  • Nickel-plated copper housing for corrosion resistance
  • 1% accuracy with XH 2.54mm 2-pin connector
4Pcs Ender 3 Thermistor 1m/39.4Inches, 3D Printer ohm NTC 100K 3950 Thermistor Temp Sensor...
063D Printer Replacement

TIEXYE 100K NTC 3D Printer Thermistor (4-Pack)

These 1-meter thermistors are designed for 3D printer heated beds and hotends, featuring a 100K ohm resistance and 3950 B value with ±1% tolerance. They are compatible with Creality Ender 3 series, Voxelab Aquila, and Elegoo Neptune 3 printers. The 2-pin XH2.54 connector allows for direct replacement of standard bed and hotend sensors in these machines.

  • 100K ohm resistance with 3950 B value
  • Compatible with Ender 3, Voxelab Aquila, and CR10 printers
Ametherm SL22 1R020 (Pack of 2) NTC THERMISTOR,ICL 1 OHM 20% 20A 22MM, (Also SG100, SG301)
07

Ametherm SL22 1R020 NTC Thermistor (2-Pack)

This 2-pack of Ametherm SL22 thermistors is designed for current limiting applications. Each unit has a 1 ohm resistance with 20% tolerance and is rated for 20A. The 22mm form factor is suitable for power supply and motor control circuits where inrush current management is required.

The listing does not specify a B value or temperature range, focusing instead on its electrical rating.

  • 1 ohm resistance with 20% tolerance
  • Rated for 20A current in a 22mm package
4 Pcs NTC 10K Epoxy Thermistor Probe 15.7 Inch, Plug‑in Temperature Sensor Replacement for Air...
08

TIEXYE 10K Epoxy Waterproof Thermistor Probe (4-Pack)

This 4-pack of 40cm probes features epoxy-sealed 10K ohm thermistors with 3950 B value. The epoxy coating provides water resistance, making it suitable for air conditioners, refrigerators, and water heaters. The XH2.54-2P plug allows for easy installation in appliances. The operating range is -30°C to 105°C, offering stable performance in wet environments.

  • Epoxy-sealed housing for water resistance
  • 40cm cable length with XH2.54-2P connector

Head-to-Head Comparisons

PATIKIL vs TIEXYE: Tolerance and B Value Differences

Both the PATIKIL MF52-103 and TIEXYE MF52B offer 10K ohm resistance, but they differ in precision and thermal characteristics. The PATIKIL unit has a 5% accuracy and a 3950 B value, while the TIEXYE unit provides 1% accuracy with a 3590 B value. If your application requires tighter temperature control, the TIEXYE's lower tolerance is a distinct advantage.

However, the PATIKIL supports a wider operating range up to 315°C, whereas the TIEXYE is rated up to 125°C.

VANXY vs KOKISO: Bulk Kit Composition and Packaging

The VANXY kit provides 200 pieces across 10 values, with 20 of each, in an SMD-friendly form factor. The KOKISO kit offers 100 pieces across 10 values, using glass-sealed MF58 packages. The VANXY kit is better suited for automated PCB assembly due to its SMD design, while the KOKISO kit's glass sealing may offer different durability characteristics for power handling.

Both kits include 10 distinct resistance values, but the VANXY provides a larger total quantity for bulk procurement.

VWTNI vs TIEXYE: Housing Material and Cable Length

Both probes feature 10K ohm thermistors with 3950 B value and XH 2.54 connectors, but they differ in housing and cable length. The VWTNI probe uses a nickel-plated copper housing and a 1-meter cable, while the TIEXYE probe uses an epoxy-sealed housing and a 40cm cable.

The VWTNI's metal housing is specified for corrosion resistance in humid environments, whereas the TIEXYE's epoxy seal emphasizes water resistance. Choose based on whether you need the longer reach of the VWTNI or the shorter, epoxy-sealed TIEXYE.

Buying Guide

Match Resistance and B Value

The resistance at 25°C and the B value determine how the thermistor responds to temperature changes. A 10K ohm sensor with a 3950 B value is a common standard for many appliances and 3D printers. If you are replacing a failed sensor, verify the original part's resistance and B value to ensure compatibility with your control board.

Mismatched values can lead to inaccurate readings or failure to trigger temperature limits.

Consider Tolerance for Precision

Tolerance indicates the allowable deviation from the stated resistance value. A 1% tolerance, as seen in the TIEXYE MF52B and VWTNI probes, provides more consistent readings than a 5% tolerance. For applications like laboratory instruments or precise 3D printing, lower tolerance is beneficial. For general household appliances where broad temperature ranges are monitored, 5% tolerance is often sufficient and may be more readily available in bulk.

Select the Right Form Factor

Thermistors come in various physical packages, including bare resistors, glass-sealed beads, and potted probes. Bare resistors are suitable for PCB integration, while potted probes with cables are easier to install in appliances like refrigerators or water heaters. Check the pin length, head diameter, and connector type to ensure the physical component fits your space and connects to your existing wiring or board.

Verify Operating Temperature Range

Each thermistor has a specified operating temperature range, which defines the limits within which it can function reliably. The PATIKIL MF52-103 supports up to 315°C, making it suitable for high-heat applications, while the VWTNI and TIEXYE probes are rated up to 105°C. Ensure the sensor's range covers the maximum temperature your application will encounter to prevent damage or inaccurate readings.

Frequently Asked Questions

What is the difference between NTC and PTC thermistors?

NTC thermistors decrease in resistance as temperature increases, while PTC thermistors increase in resistance. The products in this comparison are all NTC types, which are commonly used for temperature measurement and sensing. PTC types are often used for over-current protection or self-regulating heating.

Can I use a 10K thermistor in a 3D printer?

It depends on the printer's firmware and hardware. Many Creality Ender 3 series printers use 100K ohm thermistors for the bed and hotend, as seen in the TIEXYE 100K option. Some printers may support 10K sensors, but you must verify compatibility with your specific model and firmware settings before replacing a sensor.

What does the B value represent?

The B value is a constant that describes the relationship between resistance and temperature for an NTC thermistor. It is typically measured between two temperatures, such as 25°C and 50°C. A higher B value generally indicates a steeper change in resistance per degree, which can affect the sensitivity and linearity of the sensor.

Are epoxy-sealed thermistors waterproof?

Epoxy sealing provides water resistance, which helps protect the sensing element in humid or wet environments. The TIEXYE 10K probe is described as having an epoxy waterproof seal. However, 'waterproof' and 'water-resistant' are different; check the specific IP rating or manufacturer guidelines for submersion capabilities if you plan to use the sensor in liquid.

Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API

Was this article helpful?

Thanks for your feedback!

Thanks — we'll work to improve this article.

Kylan Shields

Kylan Shields

Kylan Shields is the editorial byline of Tossions. Comparisons published under this name are compiled from Amazon listing data (specifications, customer ratings and availability), not from hands-on testing.