Selecting the correct track runner bearing depends on the specific load requirements and physical constraints of your linear motion system. These cam followers serve as follower bearings for cam mechanisms and straight-line movement, offering high rigidity and accuracy for machine tools, industrial robots, and electronic parts machinery.
The options in this comparison vary significantly in roller diameter, thread size, and load ratings. By matching the bearing's physical dimensions to your guide rail and mounting hardware, you can ensure proper fit and performance. This guide helps you distinguish between compact, high-speed models and larger, high-load variants.
Our pick: HiPicco CF5/KR13 Cam Follower. The 13mm roller diameter and M5 thread fit small-scale linear motion systems requiring high speed up to 29000 rpm.
Our 3 picks for different needs
HiPicco CF5/KR13 Cam Follower
The 13mm roller diameter and M5 thread fit small-scale linear motion systems requiring high speed up to 29000 rpm.
Read the details
HiPicco CF12/KR30 Cam Follower
With a 590kgf dynamic load rating and 30mm roller, this model supports heavier industrial loads than smaller variants.
Read the details
HARFINGTON CF8 Cam Follower
The 10mm roller diameter and 8-pack quantity make this suitable for assemblies with limited radial clearance.
Read the detailsAll products, in detail
HiPicco CF5/KR13 Cam Follower
This HiPicco model features a 13mm roller diameter and M5x0.5mm thread, making it suitable for compact assemblies. It includes a solid seal to prevent dust entry and offers a dynamic load rating of 280kgf. The limited speed reaches 29000 rpm, supporting high-speed linear motion applications.
Buyers needing a small footprint for 3D printers or light machine tool guides should consider this 4-pack configuration.
- Roller diameter is 13mm with a 9mm width
- Dynamic load rating is 280kgf
HiPicco CF12/KR30 Cam Follower
Designed for heavier loads, this HiPicco bearing uses a 30mm roller diameter and M12x1.5mm thread. The solid seal protects against foreign matter, while the dynamic load rating stands at 590kgf. With a limited speed of 14000 rpm, it balances load capacity with rotational speed. This 4-pack is appropriate for industrial robots or machine tools requiring high rigidity and straight-line movement accuracy.
- Roller diameter is 30mm with a 14mm width
- Dynamic load rating is 590kgf
HiPicco CF10/KR22 Cam Follower
This HiPicco option provides a middle ground with a 22mm roller diameter and M10x1.25mm thread. The solid seal design helps extend bearing life by blocking dust. It supports a dynamic load of 410kgf and a static load of 320kgf. The limited speed is 17000 rpm, making it a versatile choice for electronic parts machinery and general machine tool applications where moderate load and speed are required.
- Roller diameter is 22mm with a 12mm width
- Dynamic load rating is 410kgf
uxcell CF10-1/KRV26 Cam Follower
The uxcell 3-pack features a 26mm roller diameter and M10x1.25mm thread with a hexagon socket for installation. The flat-type roller and electroplated surface improve corrosion resistance. It forms an efficient gap seal to prevent dust entry. This bearing is suited for machine tools and internal combustion engine systems where high rigidity and precision linear motion are needed.
- Roller diameter is 26mm with a 13.2mm width
- Includes hexagon socket for wrench installation
uxcell CF-1-1/4-SB CR20 Cam Follower
This uxcell 2-pack uses a 1-1/4 inch (31.75mm) roller diameter with a 1/2-20 UNF thread. Made of bearing steel, it offers good impact and vibration resistance. The cylindrical outer ring structure includes a stepped rib for effective gap sealing. It is designed for high-load or friction environments in machine tools and industrial robots, providing a robust solution for heavy-duty linear guides.
- Roller diameter is 31.75mm with a 19.05mm width
- Thread size is 1/2-20 UNF
HARFINGTON CF8 Cam Follower
This HARFINGTON 8-pack features a 10mm roller diameter and M8x1.25mm thread. The bearing steel construction offers corrosion resistance and stability between -30°C and +100°C. It has a dynamic load rating of 300kgf and a static load of 210kgf. The compact size is particularly suitable for occasions where radial space is limited, such as in tight electronic machinery assemblies.
- Roller diameter is 10mm with a 19mm stud diameter
- Dynamic load rating is 300kgf
Head-to-Head Comparisons
HiPicco CF5 vs HiPicco CF12: Speed vs Load
The HiPicco CF5/KR13 and CF12/KR30 represent opposite ends of the performance spectrum. The CF5 features a 13mm roller and supports speeds up to 29000 rpm, making it ideal for high-speed, lighter applications like 3D printers. In contrast, the CF12 has a 30mm roller and a dynamic load rating of 590kgf, but its limited speed is 14000 rpm.
If your application prioritizes rotational speed and compact size, the CF5 is the appropriate choice. If you need to support heavier loads in a machine tool, the CF12 provides the necessary structural capacity despite the lower speed limit.
HiPicco CF10 vs uxcell CF10-1: Thread and Roller Size
Both the HiPicco CF10/KR22 and the uxcell CF10-1/KRV26 use an M10x1.25mm thread, but they differ in roller dimensions. The HiPicco model has a 22mm roller diameter and a 12mm width, with a dynamic load rating of 410kgf. The uxcell model features a larger 26mm roller diameter and a 13.2mm width.
The uxcell bearing also includes a hexagon socket for installation and an electroplated surface for corrosion resistance. Choose the HiPicco if you need a slightly smaller profile, or the uxcell if you prefer the additional roller width and corrosion-resistant finish.
uxcell CR20 vs HARFINGTON CF8: Heavy Load vs Compact Fit
The uxcell CF-1-1/4-SB and HARFINGTON CF8 cater to different spatial and load needs. The uxcell bearing has a large 31.75mm roller diameter and a 1/2-20 UNF thread, designed for high-load environments with good impact resistance. The HARFINGTON model is much smaller, with a 10mm roller diameter and M8x1.25mm thread, specifically noted for use where radial space is limited.
If your machine requires a heavy-duty bearing with a large contact surface, the uxcell is the fit. If you are working in a tight space with lighter loads, the HARFINGTON's compact 8-pack is the better option.
Buying Guide
Match Roller Diameter to Guide Rail
The roller diameter determines the contact area and load distribution. Smaller rollers, like the 10mm or 13mm options, fit into tighter spaces and allow for higher rotational speeds. Larger rollers, such as the 30mm or 31.75mm models, provide greater load capacity and stability for heavy machine tools.
Measure your existing guide rail or design specifications to ensure the roller diameter aligns with the track profile.
Verify Thread Size and Type
Thread compatibility is critical for installation. Most options in this comparison use metric threads, such as M5, M8, M10, or M12, with specific pitch measurements. One uxcell model uses a 1/2-20 UNF thread, which is a standard imperial size. Ensure the thread size and pitch match your mounting hardware.
Using the wrong thread size can prevent proper installation or lead to mechanical failure under load.
Assess Load Ratings for Your Application
Dynamic load rating (Cr) and static load rating (Cor) indicate the bearing's capacity. The HiPicco CF12 offers the highest dynamic load at 590kgf, suitable for heavy industrial use. The HiPicco CF5 offers the lowest at 280kgf, fitting lighter applications. Calculate the maximum load your system will experience and select a bearing with a rating that exceeds this value to ensure longevity and safety.
Consider Sealing and Material Properties
All listed bearings feature solid seals or gap seals to prevent dust and foreign matter entry, which extends service life. The uxcell CF10-1 includes an electroplated surface for improved corrosion resistance, while the HARFINGTON CF8 is rated for temperatures between -30°C and +100°C. If your environment is dusty or corrosive, prioritize models with robust sealing and protective coatings to maintain performance.
Frequently Asked Questions
What is the difference between a cam follower and a standard bearing?
Cam followers are designed for linear motion and high rigidity, often featuring a stud for mounting. They are used in machine tools and robots for straight-line movement, whereas standard bearings typically handle rotational motion in shafts.
How many bearings do I need for a linear guide?
The number of bearings required depends on the length of the guide rail and the load distribution. Typically, at least two bearings are needed to support a load, but longer rails may require more to prevent deflection. Check your specific machine design for the recommended quantity.
Can I use these bearings in 3D printers?
Yes, several models are explicitly listed for 3D printers. The HiPicco CF5 and CF10 are suitable for this application due to their compact size and high speed capabilities. Ensure the roller diameter matches your printer's linear rail specifications.
Do these bearings come with installation tools?
The listings do not specify included tools, but the uxcell models feature hexagon sockets on the stud head. This allows you to use a standard hex wrench for installation and tightening, which is a common tool in most workshops.
This article is part of our complete guide Automotive — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
