Selecting the correct angular contact bearing requires matching the bore, outer diameter, and width to your shaft and housing. You must also decide between sealed and open configurations based on your maintenance schedule and environmental conditions. The eight options listed here range from compact 10mm bore units to larger 30mm bore bearings, covering various load capacities and precision levels.
This comparison focuses on documented dimensions, seal types, and load ratings to help you identify the right fit. Whether you need a pre-lubricated sealed unit for a pump or a high-precision duplex set for a spindle, these products offer distinct specifications for different mechanical needs.
Our 3 picks for different needs
SKF 7004 ACD Duplex Set
The SKF 7004 ACD offers ABEC 7-9 tolerance and a pre-matched duplex set for high-accuracy applications requiring combined load support.
Read the details
uxcell 3206-2RS Sealed Bearing
The uxcell 3206-2RS provides a high static load rating of 27,300 newtons in a sealed package, suitable for heavy industrial loads.
Read the details
uxcell 7001AC Open Bearing
The uxcell 7001AC is a small 12mm bore open bearing, ideal for compact assemblies where on-site lubrication is preferred.
Read the detailsAll products, in detail
uxcell 3203-2RS Sealed Bearing
The uxcell 3203-2RS is a sealed angular contact ball bearing measuring 17mm in bore, 40mm in outer diameter, and 17.5mm in width. It features a 2RS seal on both sides to retain lubricant and prevent contamination. Made from chromium steel, it offers a static load rating of 13,800 newtons and a dynamic load rating of 10,800 newtons.
This model is suitable for applications requiring a compact, pre-lubricated solution with standard ABEC 1 tolerance.
- 17mm bore, 40mm outer diameter, 17.5mm width
- Sealed on both sides with 2RS configuration
uxcell 7001AC Open Bearing
The uxcell 7001AC is a single-row open angular contact bearing with a 25-degree contact angle. It measures 12mm in bore, 28mm in outer diameter, and 8mm in width. The open design allows for easy on-site lubrication, making it ideal for environments where periodic maintenance is planned.
It is constructed from chromium steel and provides a static load rating of 5,400 newtons and a dynamic load rating of 2,750 newtons.
- 25-degree contact angle for thrust load capacity
- Open type design for easy lubrication
uxcell 3206-2RS Sealed Bearing
The uxcell 3206-2RS is a larger sealed angular contact ball bearing with dimensions of 30mm bore, 62mm outer diameter, and 24mm width. It is sealed on both sides to keep lubricant in and protect against impurities. This chromium steel bearing has a high static load rating of 27,300 newtons and a dynamic load rating of 27,000 newtons.
It is a robust option for heavier industrial loads where maintenance-free operation is preferred.
- 30mm bore, 62mm outer diameter, 24mm width
- Static load rating of 27,300 newtons
AXK 3801-2RS Sealed Bearing
The AXK 3801-2RS is a sealed double-row shaft angular contact bearing measuring 12mm in bore, 21mm in outer diameter, and 7mm in thickness. It is made from GCr15 chromium steel, offering durability and resistance to heavy loads. The listing highlights low noise, high speed, and high temperature resistance.
It is designed for various commercial and industrial applications, including pumps, compressors, and gearboxes, where a compact sealed unit is required.
- 12mm bore, 21mm outer diameter, 7mm thickness
- Made from GCr15 chromium steel
SKF 7004 ACD Duplex Set
The SKF 7004 ACD is a duplex set of two single-row angular contact ball bearings with light preload. It features a 25-degree contact angle and is designed for universal arrangement to support combined radial and thrust loads. The open configuration allows for in-place lubrication, while the fabric reinforced phenolic resin cage reduces friction and vibration.
This set offers ABEC 7 and ABEC 9 tolerance ratings for high accuracy and rotational speeds.
- Duplex set with light preload for universal arrangement
- ABEC 7 and ABEC 9 tolerance ratings
NACHI 7203B Angular Bearing
The NACHI 7203B is an angular contact ball bearing with dimensions of 17mm bore, 40mm outer diameter, and 12mm width. The listing provides specific dimensional data for this model, which is a standard single-row design. It is sold by SUN-BEARINGS. The data does not specify the seal type, load ratings, or tolerance class for this specific variant, so buyers should verify these specifications against their application requirements before purchase.
- 17mm bore, 40mm outer diameter, 12mm width
- Single-row angular contact design
HiPicco 3200-2RS Sealed Bearing
The HiPicco 3200-2RS is a rubber-sealed angular contact bearing measuring 10mm in bore, 30mm in outer diameter, and 14.3mm in width. It is pre-lubricated and made from GCr15 chrome steel. The rubber seals on both sides retain lubricant and prevent liquid impurities. It features ABEC Tolerance 1 and Z2 noise level, suitable for applications like pumps, automotive drives, and CNC machinery where compact size and sealing are critical.
- 10mm bore, 30mm outer diameter, 14.3mm width
- Pre-lubricated with double rubber seals
uxcell 7206AC Open Bearing
The uxcell 7206AC is a single-row open angular contact bearing with a 25-degree contact angle. It measures 30mm in bore, 62mm in outer diameter, and 16mm in width. The open type allows for easy lubrication, making it suitable for applications where maintenance access is available.
It is made from chromium steel and has a static load rating of 21,300 newtons and a dynamic load rating of 13,700 newtons.
- 30mm bore, 62mm outer diameter, 16mm width
- 25-degree contact angle, open type
Head-to-Head Comparisons
uxcell 3203-2RS vs NACHI 7203B: Sealed vs Single Row
The uxcell 3203-2RS and the NACHI 7203B share the same 17mm bore and 40mm outer diameter, but they differ in width and configuration. The uxcell model is 17.5mm wide and is a sealed angular contact ball bearing, while the NACHI model is 12mm wide and is a single-row design.
The uxcell bearing is sealed on both sides, which is beneficial for applications where contamination protection is critical and maintenance is infrequent. The NACHI listing does not specify the seal type or load ratings, so buyers should verify these details. If you need a sealed unit, the uxcell option is the documented choice.
If you require a single-row bearing with a 12mm width, the NACHI model fits that dimensional requirement.
uxcell 3206-2RS vs uxcell 7206AC: Sealed vs Open
Both the uxcell 3206-2RS and the uxcell 7206AC feature a 30mm bore and 62mm outer diameter, but they serve different maintenance needs. The 3206-2RS is a sealed angular contact ball bearing with a width of 24mm, designed to retain lubricant and prevent impurities. It has a static load rating of 27,300 newtons.
The 7206AC is a single-row open bearing with a width of 16mm and a 25-degree contact angle. It allows for easy on-site lubrication and has a static load rating of 21,300 newtons. Choose the 3206-2RS if you need a maintenance-free sealed unit with higher static load capacity.
Choose the 7206AC if you prefer an open design for periodic lubrication and have a specific need for a 16mm width.
SKF 7004 ACD vs uxcell 7001AC: Precision vs General Use
The SKF 7004 ACD and the uxcell 7001AC are both open angular contact bearings with a 25-degree contact angle, but they differ in size and precision. The SKF bearing has a 20mm bore and 42mm outer diameter, and it is sold as a duplex set with light preload and ABEC 7-9 tolerance.
This makes it suitable for high-accuracy applications requiring combined load support. The uxcell 7001AC has a 12mm bore and 28mm outer diameter, with ABEC 1 tolerance. It is a general-use bearing with a lower load rating. If your application requires high precision and a 20mm bore, the SKF set is the appropriate choice.
For a smaller 12mm bore with standard tolerance, the uxcell bearing is the fit.
Buying Guide
Bore and Outer Diameter
The most critical dimension is the bore diameter, which must match your shaft size. The outer diameter must fit your housing bore. The width determines the space required in the assembly. For example, the HiPicco 3200-2RS has a 10mm bore, while the uxcell 3206-2RS has a 30mm bore.
Always verify all three dimensions against your mechanical drawings before purchasing. A mismatch in any dimension will prevent installation.
Sealed vs Open Configuration
Sealed bearings, such as those with 2RS designations, are pre-lubricated and protected from contamination. They are ideal for applications where maintenance is difficult or where dust and moisture are present. Open bearings, like the uxcell 7001AC, allow for on-site lubrication, which can extend life in clean environments where periodic maintenance is possible.
Choose sealed for maintenance-free operation and open for applications where you can regularly add grease.
Load Ratings and Contact Angle
Angular contact bearings handle combined radial and axial loads. The contact angle, often 25 degrees for AC series, determines the thrust load capacity. Load ratings are given in newtons for static and dynamic loads. For instance, the uxcell 3206-2RS has a static load rating of 27,300 newtons, while the uxcell 7001AC has 5,400 newtons.
Match the load rating to your application's maximum expected load to ensure safety and longevity.
Precision and Tolerance
Tolerance classes, such as ABEC 1 (P0) or ABEC 7-9, indicate the accuracy of the bearing's geometry. ABEC 1 is suitable for most general industrial use. Higher precision classes like ABEC 7 and 9, found in the SKF 7004 ACD, are designed for high-speed and high-accuracy applications like spindles.
If your application involves high rotational speeds or requires tight positional accuracy, look for higher ABEC ratings. For standard motor drives or conveyors, ABEC 1 is typically sufficient.
Frequently Asked Questions
What is the difference between single-row and double-row angular contact bearings?
Single-row bearings, like the uxcell 7001AC, handle loads in one direction and are thinner. Sealed bearings, like the uxcell 3203-2RS, are wider and protected from contamination. Sealed designs often provide higher load capacity in a compact width, while single-row designs are easier to install in tight spaces.
Can I use an open bearing in a dusty environment?
Open bearings, such as the uxcell 7206AC, do not have seals to prevent contamination. In dusty environments, they may require more frequent cleaning and lubrication. Sealed bearings, like the HiPicco 3200-2RS, are better suited for dusty conditions because the rubber seals block impurities from entering the raceways.
What does the 25-degree contact angle mean?
The contact angle is the angle between the ball and the raceway. A 25-degree angle, as seen in the SKF 7004 ACD, provides a balance between radial and axial load capacity. It allows the bearing to support significant thrust loads in addition to radial loads, making it versatile for combined load applications.
How do I know if a bearing is pre-lubricated?
Sealed bearings, such as the AXK 3801-2RS and HiPicco 3200-2RS, are typically pre-lubricated at the factory. The listing will often state 'pre-lubricated' or 'sealed on both sides.' Open bearings are not pre-lubricated and require you to apply grease during installation or maintenance.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
