Industrial & Scientific

Bronze Round Bar: 7 Industrial Options Compared for 2026

This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.

Product details come from Amazon listings. Compare the specifications that matter to you, and check the current price and availability on Amazon before buying. How we compare

Selecting the correct bronze round bar depends on the specific alloy properties and dimensions required for your project. The seven options listed here cover two primary alloy types: 932 bearing bronze and 655 silicon bronze. Each variant differs in diameter, length, and temper, catering to different mechanical and environmental needs.

932 bronze is generally chosen for high-strength applications like bearings and thrust washers, while 655 silicon bronze is preferred for its corrosion resistance in marine environments. By matching the alloy to the application and the size to the design, you can ensure the material performs as intended in your industrial or scientific setup.

AT A GLANCE

Our 3 picks for different needs

932 Bronze Round Bar, Unpolished (Mill) Finish, As Cast, SAE 660, ASTM B505, 1' Diameter...
02Heavy-Duty Bearing Application

OnlineMetals 932 Bronze Round Bar 1" Diameter

The 1-inch diameter provides a larger cross-section for high-strength 932 bronze bearing applications.

Read the details
655 Bronze Round Bar, Unpolished (Mill) Finish, H04 Temper, ASTM B98, 0.25' Diameter, 24' Length...
05Marine Hardware Fabrication

OnlineMetals 655 Bronze Round Bar 0.25" Diameter

The 24-inch length of 655 silicon bronze offers more material for cutting multiple marine fasteners.

Read the details
OnlineMetals 655 Bronze Round Bar, Unpolished (Mill) Finish, H04 Temper, ASTM B98, 0.375' Diameter...
03Small Shaft Component

OnlineMetals 655 Bronze Round Bar 0.375" Diameter

The 0.375-inch diameter is suitable for small shafts and fasteners requiring corrosion resistance.

Read the details

All products, in detail

932 Bronze Round Bar, Unpolished (Mill) Finish, As Cast, SAE 660, ASTM B505, 0.5' Diameter...
01

OnlineMetals 932 Bronze Round Bar 0.5" Diameter

This 932 bronze bar features an unpolished mill finish and is cast to SAE 660 and ASTM B505 standards. The 0.5-inch diameter and 12-inch length make it suitable for general-purpose industrial applications. It is a high-strength bearing bronze often used in bushings, thrust washers, and light-duty gears.

Buyers needing a standard size for valve components or pump parts will find this specification practical.

  • 0.5-inch diameter and 12-inch length
  • Meets SAE 660 and ASTM B505 standards
932 Bronze Round Bar, Unpolished (Mill) Finish, As Cast, SAE 660, ASTM B505, 1' Diameter...
02Heavy-Duty Bearing Application

OnlineMetals 932 Bronze Round Bar 1" Diameter

Offered in a 1-inch diameter and 12-inch length, this 932 bronze bar provides a larger cross-section for heavier load-bearing applications. It shares the same unpolished mill finish and as-cast condition as its smaller counterparts. The alloy is known for high endurance and strength, making it a common choice for industrial bearings and pump components.

This size is appropriate for buyers requiring a robust shaft or bushing material.

  • 1-inch diameter and 12-inch length
  • High-strength bearing bronze alloy
OnlineMetals 655 Bronze Round Bar, Unpolished (Mill) Finish, H04 Temper, ASTM B98, 0.375' Diameter...
03Small Shaft Component

OnlineMetals 655 Bronze Round Bar 0.375" Diameter

This 655 silicon bronze bar is supplied in an H04 temper with an unpolished mill finish. It meets ASTM B98 standards and is noted for good corrosion resistance and formability. The 0.375-inch diameter and 12-inch length are well-suited for marine hardware, fasteners, and small shafts.

Its resilience makes it a distinct option for applications where environmental durability is a priority.

  • 0.375-inch diameter and 12-inch length
  • H04 temper with good corrosion resistance
Industrial Metal Sales - 954 Bronze Round Bar 3/4' Diameter x 12'-Long
04

Industrial Metal Sales 954 Bronze Round Bar 3/4" Diameter

This 954 bronze bar is continuously cast with a mill finish and is described as oversized. It is available in a 3/4-inch diameter and 12-inch length. The listing does not specify a temper or detailed alloy properties beyond the 954 designation. This option is suitable for buyers seeking a standard bronze bar for general fabrication where specific tempering is not required.

  • 3/4-inch diameter and 12-inch length
  • Continuously cast with mill finish
655 Bronze Round Bar, Unpolished (Mill) Finish, H04 Temper, ASTM B98, 0.25' Diameter, 24' Length...
05Marine Hardware Fabrication

OnlineMetals 655 Bronze Round Bar 0.25" Diameter

Featuring a 0.25-inch diameter and a 24-inch length, this 655 silicon bronze bar offers a longer profile than many other options. It is supplied in an H04 temper with an unpolished mill finish and meets ASTM B98 standards. The alloy's strength and corrosion resistance make it ideal for marine hardware and small fasteners.

The extended length provides more material for cutting multiple parts from a single bar.

  • 0.25-inch diameter and 24-inch length
  • H04 temper silicon bronze
932 Bronze Round Bar, Unpolished (Mill) Finish, As Cast, SAE 660, ASTM B505, 0.75' Diameter...
06

OnlineMetals 932 Bronze Round Bar 0.75" Diameter

This 932 bronze bar is available in a 0.75-inch diameter and 12-inch length. It features an unpolished mill finish and is cast to SAE 660 and ASTM B505 standards. The alloy is a high-strength bearing bronze typically used in bushings, thrust washers, and valve components.

This intermediate size offers a balance between the smaller 0.5-inch and larger 1-inch variants for medium-duty applications.

  • 0.75-inch diameter and 12-inch length
  • Meets SAE 660 and ASTM B505 standards
655 Bronze Round Bar, Unpolished (Mill) Finish, H04 Temper, ASTM B98, 0.5' Diameter, 12' Length...
07

OnlineMetals 655 Bronze Round Bar 0.5" Diameter

This 655 silicon bronze bar is supplied in a 0.5-inch diameter and 12-inch length. It features an H04 temper and an unpolished mill finish, meeting ASTM B98 standards. The alloy is known for its strength, resilience, and good corrosion resistance. It is typically used for marine hardware, fasteners, bushings, and shafts, making it a versatile choice for buyers needing a standard diameter in silicon bronze.

  • 0.5-inch diameter and 12-inch length
  • H04 temper with good formability

Head-to-Head Comparisons

932 Bearing Bronze vs 655 Silicon Bronze: 0.5" Diameter

Both the OnlineMetals 932 and 655 bronze bars are available in a 0.5-inch diameter and 12-inch length, but they serve different purposes. The 932 alloy is a high-strength bearing bronze designed for applications like bushings and thrust washers where mechanical endurance is critical. In contrast, the 655 silicon bronze is noted for its good corrosion resistance and formability, making it better suited for marine hardware and fasteners.

If your project involves high-load mechanical parts, the 932 alloy is the appropriate choice. If the environment is corrosive or the parts are for marine use, the 655 alloy is the better fit.

1" vs 0.75" 932 Bronze: Diameter Selection

These two OnlineMetals 932 bronze bars differ primarily in diameter, with the 1-inch and 0.75-inch variants both measuring 12 inches in length. The 1-inch bar provides a larger cross-sectional area, which is beneficial for applications requiring higher load-bearing capacity or larger shafts. The 0.75-inch bar offers a middle ground, suitable for medium-duty bearings or valve components that do not require the maximum diameter.

Both are cast to SAE 660 and ASTM B505 standards, so the choice depends entirely on the physical dimensions of your design. Select the 1-inch bar for heavier loads and the 0.75-inch bar for more compact assemblies.

655 Bronze Lengths: 24" vs 12"

The OnlineMetals 655 silicon bronze bars are available in different lengths, with the 0.25-inch diameter bar measuring 24 inches and the 0.375-inch diameter bar measuring 12 inches. The longer 24-inch bar allows for more material to be cut from a single piece, which can be efficient for projects requiring multiple small fasteners or shafts.

The 12-inch bar is a standard length that may be sufficient for single-component fabrication. Both are in the H04 temper and meet ASTM B98 standards. Choose the 24-inch length if you need to maximize material yield from a single purchase, or the 12-inch length if you are working on a single, smaller component.

Buying Guide

Alloy Selection: 932 vs 655

The choice between 932 and 655 bronze depends on the primary stress the part will face. 932 bronze, also known as bearing bronze, is a high-strength alloy designed for high endurance. It is typically used in bushings, thrust washers, bearings, and light-duty gears. 655 silicon bronze, on the other hand, is valued for its good corrosion resistance, resilience, and formability.

It is commonly used for marine hardware, fasteners, and shafts. If your application involves high mechanical load, choose 932. If it involves corrosive environments or marine use, choose 655.

Diameter and Length Requirements

Ensure the bar's diameter matches your design specifications. The listed options range from 0.25 inches to 1 inch in diameter. Lengths are generally 12 inches, with one exception of 24 inches for the 0.25-inch 655 bronze. A larger diameter provides greater structural integrity for load-bearing parts, while a smaller diameter is suitable for precision components or fasteners.

The length determines how many parts you can cut from a single bar. Check your project's material requirements to select the appropriate size.

Temper and Finish Considerations

The temper of the bronze affects its mechanical properties. The 655 bronze bars are supplied in an H04 temper, which indicates a specific level of hardness and formability. The 932 bronze bars are described as as-cast, which is a standard condition for this alloy. All bars feature an unpolished mill finish, which is typical for industrial stock.

If your application requires a specific surface finish or hardness, you may need to perform additional machining or treatment. The mill finish is suitable for most industrial applications where surface aesthetics are not a priority.

Standards and Specifications

Verifying that the material meets industry standards is crucial for industrial applications. The 932 bronze bars meet SAE 660 and ASTM B505 standards, ensuring consistent composition and properties. The 655 bronze bars meet ASTM B98 standards. The 954 bronze bar from Industrial Metal Sales is continuously cast but does not list specific temper or standard details in the provided data.

Adhering to these standards helps ensure that the material will perform reliably in your application. Always confirm that the alloy and standard match your project's engineering requirements.

Frequently Asked Questions

What is the difference between 932 and 655 bronze?

932 bronze is a high-strength bearing bronze used for mechanical parts like bushings and gears. 655 bronze is a silicon bronze known for corrosion resistance and formability, often used in marine hardware.

What does H04 temper mean for 655 bronze?

H04 is a temper designation for 655 silicon bronze that indicates a specific level of hardness and formability. It is a standard condition for this alloy in industrial applications.

Can I cut these bronze bars myself?

Yes, bronze bars are generally machinable. You can cut, drill, or machine them to fit your specific design requirements. The unpolished mill finish is suitable for further machining.

Are these bars suitable for marine use?

655 silicon bronze is typically used for marine hardware due to its good corrosion resistance. 932 bronze is more focused on mechanical strength and is less commonly specified for marine environments.

Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API

Was this article helpful?

Thanks for your feedback!

Thanks — we'll work to improve this article.

Kylan Shields

Kylan Shields

Kylan Shields is the editorial byline of Tossions. Comparisons published under this name are compiled from Amazon listing data (specifications, customer ratings and availability), not from hands-on testing.