Selecting the right keyed shaft depends on the specific diameter, length, and steel grade required for your mechanical assembly. Keyed shafts are essential for transferring torque between a shaft and components like gears, sprockets, and pulleys, and choosing the correct size ensures a secure connection without slippage.
The options available range from 1/2-inch to 1-inch diameters, with lengths from 1 foot to 6 feet. Steel grades vary between 1018 cold-rolled, C1018 cold drawn, and 1045 carbon steel, each offering different strength and machinability characteristics. This comparison helps you match the shaft to your specific project needs.
Our pick: 1" 1018 Cold-Rolled Keyed Shaft (3 ft). This 3-foot shaft offers a common 1-inch diameter with 1018 cold-rolled steel and a 1/4-inch keyway for general power transmission.
Our 3 picks for different needs
1" 1018 Cold-Rolled Keyed Shaft (3 ft)
This 3-foot shaft offers a common 1-inch diameter with 1018 cold-rolled steel and a 1/4-inch keyway for general power transmission.
Read the details
1" 1045 Carbon Steel Keyed Shaft (3 ft)
This 3-foot shaft uses 1045 carbon steel, providing a different material profile for buyers who prefer this grade for their application.
Read the details
1/2" C1018 Cold Drawn Keyed Shaft (1 ft)
This 1-foot 1/2-inch shaft is a compact option with a 1/8-inch keyway, suitable for smaller machinery or light-duty projects.
Read the detailsAll products, in detail
1" 1018 Cold-Rolled Keyed Shaft (3 ft)
This 1-inch diameter shaft is made from cold-rolled 1018 steel, offering a smooth finish and specific strength metrics for precision work. It features a pre-cut 1/4-inch keyway that spans the 3-foot length, allowing for immediate torque transfer to gears or pulleys. This option is well-suited for fabrication or repair tasks where a standard 1-inch shaft is required and the buyer wants to avoid the labor of machining their own keyway.
- Constructed from cold-rolled 1018 steel with a 54,000 PSI yield strength.
- Features a 1/4-inch keyway on a 3-foot long, 1-inch diameter shaft.
3/4" C1018 Cold Drawn Keyed Shaft (2 ft)
A 3/4-inch precision cut shaft made from C1018 cold drawn steel, this option is available in multiple lengths including the 2-foot size listed here. It includes a 3/16-inch by 3/32-inch keyway, which is standard for this diameter. This shaft is a practical choice for smaller machinery or DIY projects that require a compact, pre-keyed component without the need for additional machining on the shop floor.
- Made from C1018 cold drawn steel with a 3/4-inch diameter.
- Includes a 3/16-inch by 3/32-inch keyway on a 2-foot length.
1" 1018 Cold-Rolled Keyed Shaft (6 ft)
This 6-foot version of the 1-inch shaft provides the same cold-rolled 1018 steel construction and 1/4-inch keyway as its shorter counterpart. The extended length makes it suitable for longer conveyor systems or drive shafts that span a greater distance. It offers the same strength and finish characteristics, providing a ready-to-use solution for applications requiring a longer span of keyed shafting.
- 6-foot length of 1-inch diameter cold-rolled 1018 steel.
- Features a standard 1/4-inch keyway for compatibility with keyed components.
1" 1045 Carbon Steel Keyed Shaft (3 ft)
This Hicarer shaft is constructed from 1045 carbon steel, a material noted for its strength and machinability. It features a 1/4-inch by 9/64-inch keyway milled along the full 3-foot length. The shaft is turned, ground, or polished to meet specific tolerances, making it a versatile option for high-load applications like cranes or precision robotics where a different steel grade might be preferred.
- Constructed from 1045 carbon steel with a 1-inch diameter.
- Features a 1/4-inch by 9/64-inch keyway on a 3-foot length.
1" 1045 Carbon Steel Keyed Shaft (1.5 ft)
A shorter 1.5-foot variant of the 1045 carbon steel shaft, this option includes the same 1/4-inch by 9/64-inch keyway. It is ideal for compact assemblies or repair jobs where a full 3-foot length is unnecessary. The pre-machined keyway saves time, and the 1045 steel provides a good balance of strength and workability for various mechanical applications.
- 1.5-foot length of 1-inch diameter 1045 carbon steel.
- Includes a 1/4-inch by 9/64-inch keyway for torque transfer.
1" 1045 Carbon Steel Keyed Shaft (2 ft)
This 2-foot keyed shaft is made from 1045 carbon steel and features a 1/4-inch by 9/64-inch keyway. It offers a middle-ground length for projects that require more than 1.5 feet but less than 3 feet. The shaft is designed to prevent slippage between the shaft and rotating elements, ensuring smooth operation in drive or rotating shaft applications.
- 2-foot length of 1-inch diameter 1045 carbon steel.
- Features a 1/4-inch by 9/64-inch keyway milled along the length.
1/2" C1018 Cold Drawn Keyed Shaft (1 ft)
This 1/2-inch shaft is made from C1018 cold drawn steel and is available in a 1-foot length. It features a 1/8-inch by 1/16-inch keyway, which is appropriate for smaller diameter shafts. This is a suitable choice for light-duty applications, small motors, or hobbyist projects where a compact, pre-keyed shaft is needed to transfer torque to small gears or sprockets.
- 1/2-inch diameter shaft made from C1018 cold drawn steel.
- Features a 1/8-inch by 1/16-inch keyway on a 1-foot length.
3/4" C1018 Cold Drawn Keyed Shaft (1 ft)
A 1-foot length of 3/4-inch C1018 cold drawn steel shaft, this option includes a 3/16-inch by 3/32-inch keyway. It is a compact version of the 3/4-inch shaft, suitable for short spans or specific repair needs. The precision cut keyway ensures a secure connection for load-bearing components without the need for additional machining.
- 1-foot length of 3/4-inch diameter C1018 cold drawn steel.
- Includes a 3/16-inch by 3/32-inch keyway for keyed components.
Head-to-Head Comparisons
1018 Steel vs 1045 Steel: 1-inch Keyed Shafts
Both the 1018 cold-rolled shaft and the 1045 carbon steel shaft are 1-inch in diameter and 3 feet long, but they differ in material. The 1018 shaft is noted for its precision finish and specific yield strength, while the 1045 shaft is highlighted for its strength and machinability.
The keyway size is also different, with the 1018 shaft using a 1/4-inch keyway and the 1045 shaft using a 1/4-inch by 9/64-inch keyway. Buyers should choose based on which steel grade and keyway dimension are required by their specific components.
3/4-inch Shaft Lengths: 2 ft vs 1 ft
These two options are both 3/4-inch diameter C1018 cold drawn steel shafts with the same 3/16-inch by 3/32-inch keyway. The primary difference is the length, with one being 2 feet and the other 1 foot. The 2-foot shaft is suitable for longer spans, while the 1-foot shaft is ideal for compact assemblies or when only a short piece is needed.
Choosing between them depends on the specific distance between the components that will be mounted on the shaft.
1-inch 1018 Steel: 3 ft vs 6 ft
These two shafts are identical in diameter (1 inch), steel grade (1018 cold-rolled), and keyway size (1/4 inch). The only difference is the length, with one being 3 feet and the other 6 feet. The 6-foot shaft is suitable for longer conveyor systems or drive shafts, while the 3-foot shaft is a more common size for general applications.
Buyers should select the length that matches the span of their specific mechanical assembly.
Buying Guide
Selecting the Correct Diameter
The diameter of the shaft must match the bore of the components you are mounting, such as gears or pulleys. Common sizes in this comparison include 1/2 inch, 3/4 inch, and 1 inch. Ensure that the shaft diameter you choose is compatible with the components in your assembly.
A mismatch in diameter will prevent the components from mounting correctly and will compromise the torque transfer capability of the shaft.
Choosing the Right Keyway Size
The keyway size must match the key you intend to use. The keyway dimensions are specific to the shaft diameter, with 1/2-inch shafts using a 1/8-inch keyway, 3/4-inch shafts using a 3/16-inch keyway, and 1-inch shafts using a 1/4-inch keyway. Verify that the keyway size of the shaft matches the key size required by your components to ensure a secure and slip-free connection.
Determining the Required Length
The length of the shaft should be sufficient to span the distance between the components it will support. Options range from 1 foot to 6 feet. Measure the required span in your assembly and select a shaft length that provides the necessary coverage. If the shaft is too short, it will not reach the components; if it is too long, it may need to be cut, which could affect the keyway.
Considering Steel Grade and Application
Different steel grades offer different properties. 1018 cold-rolled steel is known for its precision finish, while 1045 carbon steel is noted for its strength and machinability. C1018 cold drawn steel is a common choice for general applications. Consider the specific requirements of your application, such as load capacity and environmental conditions, when selecting the steel grade for your keyed shaft.
For motor assemblies, ensure the shaft meets the torque requirements.
Frequently Asked Questions
Are mechanical keys included with these shafts?
No, the mechanical keys are not included with the shafts. You will need to purchase the appropriate keys separately to match the keyway size of the shaft and the components you are mounting. Ensure the key dimensions match the keyway specifications provided for each shaft.
What is the difference between 1018 and 1045 steel?
1018 steel is a low-carbon steel often used for precision applications due to its good machinability and finish. 1045 steel is a medium-carbon steel that offers higher strength and hardness. The choice between them depends on the specific strength and finish requirements of your application.
Can I cut these shafts to a custom length?
Yes, you can cut these shafts to a custom length if needed. However, be aware that cutting the shaft may affect the keyway if you cut through it. It is best to cut the shaft at a point where the keyway is not required, or to machine a new keyway if necessary.
What is the tolerance on these shafts?
The tolerance on the Hicarer 1045 steel shafts is approximately 0.015 inches due to manual measurement. The other shafts are described as precision cut or cold-rolled, but specific tolerance values are not provided in the data. Check the product details for more specific tolerance information.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
