Selecting the right magnitude comparator depends on your specific speed requirements and voltage constraints. These 4-bit ICs are fundamental to digital logic, allowing circuits to determine if one binary word is greater than, less than, or equal to another.
The options range from standard CMOS chips with 250 ns delays to high-speed HC series parts with 33 ns delays. Whether you are repairing legacy industrial equipment or designing a new servo control loop, matching the logic family and package type to your board is essential for reliable operation.
Our 3 picks for different needs
Rizees CD74HC85E 4-Bit Comparator (5-Pack)
The Rizees CD74HC85E offers a 33 ns max propagation delay, making it a strong choice for time-critical digital logic.
Read the details
Juried Engineering CD4585BE 4-Bit Comparator (Pack of 10)
The Juried CD4585BE provides a 180 ns typical response, offering a faster alternative to the 250 ns typical delay of the CD4063BE.
Read the details
Juried Engineering CD4063BE 4-Bit Comparator (Pack of 20)
The 20-pack of Juried CD4063BE chips is ideal for projects requiring multiple units for cascading or redundancy.
Read the detailsAll products, in detail
Juried Engineering CD4063BE 4-Bit Comparator (Pack of 10)
This DIP-16 chip compares two 4-bit words with a typical propagation delay of 250 ns at 10 V. It supports 5-V, 10-V, and 15-V parametric ratings, making it suitable for mixed-voltage logic boards. The pack of 10 is ideal for hobbyists or engineers prototyping servo motor controls and process controllers who need a medium-speed CMOS solution.
- Typical comparison time of 250 ns at 10 V
- Supports 5-V, 10-V, and 15-V supply voltages
Juried Engineering CD4585BE 4-Bit Comparator (Pack of 10)
Designed for computer and logic applications, this 4-bit magnitude comparator offers a faster typical response of 180 ns at 10 V compared to standard CMOS variants. It features standardized symmetrical output characteristics and supports cascading for wider bit widths. This is a strong choice for logic designers who require slightly quicker decision times in their control loops.
- Typical comparison time of 180 ns at 10 V
- Standardized symmetrical output characteristics
Rizees CD74HC85E 4-Bit Comparator (5-Pack)
This High-Speed CMOS comparator operates with a maximum propagation delay of 33 ns at 6 V. It is rated for an operating temperature range of -55°C to 125°C, suitable for industrial environments. The 16-DIP package and 5.2 mA output drive capability make it a robust choice for high-speed digital logic tasks.
- Max propagation delay of 33 ns at 6 V
- Operating temperature range of -55°C to 125°C
Juried Engineering CD4063BE 4-Bit Comparator (Pack of 20)
Identical in function to the 10-pack variant, this larger bundle offers the same 250 ns typical comparison speed at 10 V. It is well-suited for production runs or educational kits where multiple units are required for cascading or redundancy. The consistent 5-V, 10-V, and 15-V ratings ensure compatibility with various power supply configurations in process control systems.
- Pack of 20 units for bulk prototyping
- Maximum input current of 1 µA at 18 V
AVLIS-CO SN74LS688N Magnitude Comparator
This Low-Power Schottky (LS) series comparator is designed for bit-level output comparison. While specific timing data is not detailed in the listing, the LS family is known for its balance of speed and power consumption in older industrial logic designs. It is a suitable replacement for legacy systems requiring 74LS-series compatibility in control panels or test equipment.
- Low-Power Schottky (LS) logic family
- Bit output configuration for comparison
NTE Electronics NTE74LS85 4-Bit Comparator (10-Pack)
This 16-lead DIP chip is a Low-Power Schottky 4-bit magnitude comparator, often used as a direct replacement for original equipment manufacturer parts. The 10-item pack provides sufficient quantity for repair and maintenance tasks. It is a practical option for technicians maintaining industrial machinery where specific legacy part numbers are required.
- 16-Lead DIP package
- Low Power Schottky 4-bit comparator
Design of Magnitude Comparator Using Reversible Logic Gates (Book)
This academic publication explores the theoretical design of magnitude comparators using reversible logic gates. It is not a physical component but a resource for engineers and students interested in low-power and reversible computing architectures. It serves as a reference for understanding the underlying logic principles behind the physical ICs listed in this comparison.
- Academic book on reversible logic design
- Focuses on theoretical comparator architecture
AVLIS-CO CD4063BE Magnitude Comparator
This single-unit CD4063BE chip features active high outputs and a 16-PDIP package. It is a standard CMOS 4-bit comparator suitable for breadboarding or PCB prototyping. For buyers needing a single replacement part or a specific output polarity configuration, this option provides the core comparison functionality without the bulk of a multi-pack.
- Active high output configuration
- 16-PDIP package format
Head-to-Head Comparisons
Juried CD4063BE vs CD4585BE: Speed and Output Characteristics
Both Juried Engineering chips are 4-bit comparators in DIP-16 packages, but they differ in speed and output behavior. The CD4063BE has a typical comparison time of 250 ns at 10 V, while the CD4585BE is faster at 180 ns. The CD4585BE also explicitly lists standardized symmetrical output characteristics, which can simplify circuit design.
If your application requires the fastest possible decision time within the standard CMOS range, the CD4585BE is the better fit. For general-purpose logic where 250 ns is sufficient, the CD4063BE is a reliable choice.
Rizees CD74HC85E vs Juried CD4063BE: High-Speed vs Standard CMOS
The Rizees CD74HC85E is a High-Speed CMOS (HC) part with a maximum propagation delay of 33 ns at 6 V. In contrast, the Juried CD4063BE is a standard CMOS part with a typical delay of 250 ns at 10 V. The HC series is significantly faster but may have different power consumption characteristics.
If your system requires rapid comparison for high-frequency logic, the Rizees chip is the appropriate selection. For slower control loops where power efficiency and standard voltage ratings are prioritized, the Juried CD4063BE is a suitable alternative.
AVLIS-CO SN74LS688N vs NTE NTE74LS85: Legacy Logic Families
Both of these options belong to the Low-Power Schottky (LS) logic family, which is common in older industrial and commercial equipment. The AVLIS-CO SN74LS688N is described as a bit output comparator, while the NTE NTE74LS85 is a standard 4-bit magnitude comparator. Specific timing data is not provided for either in the supplied listings, so a direct speed comparison cannot be made.
Choose the part that matches the specific pinout and part number required by your legacy system. Both are suitable for repair and maintenance of older control panels.
Buying Guide
Propagation Delay and Speed
The propagation delay determines how quickly the comparator outputs a result. The Rizees CD74HC85E offers a 33 ns max delay, making it ideal for high-speed digital logic. The Juried CD4585BE is faster than the CD4063BE at 180 ns vs 250 ns typical. For Electronic Component Motor Drives and other fast-acting control systems, selecting a chip with a lower delay is critical to maintaining system stability and response time.
Voltage Ratings and Compatibility
Check the supply voltage ratings to ensure compatibility with your power supply. The Juried CD4063BE supports 5-V, 10-V, and 15-V parametric ratings. The Rizees CD74HC85E is rated for 6 V in its delay specifications. Using a chip with a voltage rating lower than your supply can damage the component.
Always verify that the maximum supply voltage of the IC matches your board's power rails to prevent failure.
Package Type and Pinout
Most options in this list use a 16-DIP or 16-PDIP package, which is standard for through-hole PCBs and breadboards. The NTE NTE74LS85 is also a 16-lead DIP. Ensure that the pinout of the specific part you choose matches your existing board or socket. While many 4-bit comparators have similar functions, pin assignments can vary between manufacturers and logic families, so always consult the datasheet before installation.
Logic Family and Legacy Support
The logic family (CMOS, HC, LS) affects power consumption and speed. The CD4000 series (like the CD4063BE) is standard CMOS, while the 74LS series (like the NTE74LS85) is Low-Power Schottky. For Motor Contactors and other industrial interfaces, the logic family must match the input thresholds of the receiving circuit.
If you are replacing a part in an existing system, choose the same logic family to ensure signal compatibility without redesigning the board.
Frequently Asked Questions
What is the difference between CD4063BE and CD4585BE?
The CD4585BE is faster, with a typical comparison time of 180 ns at 10 V, compared to 250 ns for the CD4063BE. The CD4585BE also features standardized symmetrical output characteristics, which can be beneficial for certain logic designs.
Can I cascade these comparators for more bits?
Yes, the Juried Engineering listings explicitly state that expansion to 8, 12, 16, or 4N bits is possible by cascading units. This allows you to build wider comparators for larger data words using multiple 4-bit chips.
Is the Rizees CD74HC85E faster than the Juried chips?
Yes, the Rizees CD74HC85E has a maximum propagation delay of 33 ns at 6 V, which is lower than the 180 ns and 250 ns typical delays of the Juried CD4585BE and CD4063BE, respectively.
Do I need a specific power supply for these ICs?
The Juried CD4063BE supports 5-V, 10-V, and 15-V supplies. The Rizees CD74HC85E is specified at 6 V for delay measurements. You must ensure your power supply voltage falls within the absolute maximum ratings of the specific chip you are using.
This article is part of our complete guide Industrial & Scientific — browse all our comparisons and buying guides.
Last update on 2026-11-18 / Affiliate links / Images from Amazon Product Advertising API
